|
ACROWOOD CORPORATION Model 612, Single-Deck Suspended Screen complete with the following features: -- Single Deck for two separations. -- 5 HP Dual Drive design. -- 6 Ft. x 12 Ft. Screen size. -- Punched Plate Screen, 1-5/8” diameter round holes with 3/8” spacing. -- Nice Custom Fab. added steel Support Structure. -- Capacity in Units per Hour (200 Cu. Ft. per unit): 29 -- Current owner bought the machine used and operated it only a couple of months but changed operation and has no further use for it. -- Overall Dimensions: 8 Ft. H, 11.3 Ft. W, approx. 13 Ft. L. -- Weight 4.5 Tons.
Equipment Location:NORTHEAST
Bill Christoffersen
800-374-5009 ext:365
|
|
BM&M Screen 7 x 12 , model 7x12 DS, top screen holes are 1 7/8", for the 2 stainless woven wire fines screens with 3/16"+holes , ball decks and fines pans are stainless steel, 3 of the discharge chutes are stainless steel, the current photos show before, during and after paint, more photos to come, support stand and hangers will be attached to screen after paint job is finished.
Equipment Location:Toledo, WA
Machinery Scene
360-864-2800
|
|
BM&M support hangers assemblies, Unused BM&M 773-11/36/4 screen support hangers with bolts still in factory box, photos show both sets of 4 each- (8 hangers available) s/n H177B4146A
BM & M U-joint hanger modern style, BM &M screen hanger assembly, BM and M support u joint shafts, unused bmm screen hangers, BMM basket support hangers, stored in our warehouse for prompt delivery. We also have a few used hangers 36 inches long (measured yoke face to yoke face) available, 8 unused and 4 used hangers available ( photos of used hangers available upon request). We have them in inventory for prompt delivery.
Equipment Location:Toledo, WA
Machinery Scene
360-864-2800
|
|
8x14 reverse flow BM&M screen in good condition
Equipment Location:Talladega, AL
Woodland Parts & Service Inc
256-362-5097
|
|
Fulghum 7'x 7' Chip Screen with Top Screen Only
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
|
|
6' x 6' Fulghum Chip Screen
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
|
|
Fulghum 6' x 6' Chip Screen
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
|
|
Fulghum 5 X 5 Chip Screen w/Collector
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
|
|
5' x 5' HMC CM48 Chip Screen
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
|
|
Morbark 5' x 8' Shaker Screen w/Super Structure & Electric Drive. Out and Ready to Load.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
|
|
SELLING AT AUCTION JUNE 15, 2019 - MORBARK 6X6 CHIP SCREEN W/ Separation $6,300 OBO
Equipment Location:New Milford, PA
Kittrell Sawmill Brokers and Appraisers
931-797-6284
|
|
PRECISION 7 x 7 Chip Screen - like new screen box. Rear discharge for acceptable chips.
Equipment Location:Columbus, GA
Ben Jones Machinery
706-324-2604
|
|
Precision 5 x 5 Chip Screen Top Screen only
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
|
|
Precision 5x5 Chip Screen
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
|
|
Precision 6 x 6 Chip Screen w/Collector
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
|
|
Precision 6 x 6 Shaker Screen S/N S1836
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
|
|
New Never Installed Precision 8 x 8 Chip Screen
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
|
|
Precision twin deck chip screen, approximate screen area 6ft X 6ft. screen size PCS66, serial# S-1225, removed from service 2015- prior owner shut down entire plant, top screen hole size 2 1/4" x 2 1/4", bottom screen hole size 1/4". can provide video of test run if requested,
Equipment Location:Toledo, WA
Machinery Scene
360-864-2800
|
|
PRECISION Model PCS-66 Double Deck Chip Screen with the following features: -- Screen size: 72” x 72” per deck. -- Suspended Screen Deck Configuration & Hanger Rods with 4-way Crosshead connection. -- Extended Steel Support Structure. -- 2 HP Screen Drive. -- (3) Discharge Outlets. -- Input “weir” Tray. -- Top Deck Screen Punch Plate Hole size: 2 ¼” x 2 ¼”, -- Bottom Deck Screen Punched Hole size: ¼” diameter. -- Capacity: 18 TPH NOTES: ● Weight with Extended Support Structure: Approximately 3900 pounds.
Equipment Location:PACIFIC NORTHWEST
Bill Christoffersen
800-374-5009 ext:365
|
|
Precision 6 X 6 Chip Screen.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
|