Carriage (Sawmill) For Sale

Complete Cleereman carraige mill for sale. Was running everyday that workers would show up. Forced to sell because we couldn't get reliable help. Includes 50ft track, saw cab, log in-feed deck, off- bearing belt, and 60ft green chain. $50,000 obo Pictures available. Call or text 270-604-0168 or 270-604-1900 or email [email protected]

Lot 150: Cleereman Carriage 36”, 3 HB carriage, 12 volt over air setworks, includes operators cab and all controls, includes drive, track and frame, frame size 46' x 51 1/2” wide x 34” high, well used but still in working order.

Meadows Mills #2 $3500 706-870-0682 Hydraulic 4 headblock carriage, hydraulics run off mandrel, 120 volt setworks log turner. Mill is old but was ran daily until a year and a half ago.

This mill has been shut down for approx 5-years. THe carriage will need to be removed. 4-HB Carriage with computer controls. Also available 250 Tyrone Berry Shotgun Drive.

CLEEREMAN Model L.P.38 Linear positioning hydraulic carriage. 2004 Model. 41" opening, 4 headblock (20' frame spaced right to left 48", 60", 72") , 6" tubular frame, 12" wheels, 2 3/4" linear cylinders, 20 HP hydraulic power unit, complete with 58' track system from end bumper to end bumper, track frame to ground, SILVATECH setworks included. Total package priced at $65,000 OBO. FOB MILL SITE-TO BE REMOVED BY BUYER. (NOTE AVAILABLE FOR ADDITIONAL COSTS: TYRONE 250C shotgun feed; husk with off-bearing belt, 250HP motor and drive; 4 strand log deck; CORLEY Model 30 log turner; FULGHUM debarker and 60" chipper; 6x6 screen, cyclone and pipe, PHELPS parallel chip loader; FRICK 8" double arbor gang with 300HP motors; FULGHUM vibrating conveyor 40'x 18/32"w x 9"d.)

Cone Chipping head sawmill with 4-50hp motors, traveling overhead carriage with builtin waste conveyor (ref# 110) Call Zach Kittrell 931-224-0699

Cooper Machine has a MIT True Lumber System available and in stock. This machine includes: - For logs 8-17' long and up to 36" in diameter - 17.5° stationary slant carriage has three reinforced steel knees, pneumatic dogs, motorized log rotators, board and sawdust conveyor, full hydraulic drive and three arms to assist in rotating logs on the car - Inclined double cut 17.5° movable headrig with 49 inch solid steel wheels, 6" band, high tension pneumatic system, mobile pressure guides, mechanized rails and winch for headrig movement with 30hp motor with electromagnetic brake frequency inverter - 6 x 6 climate controlled cab - Comes as a modular unit with 20' log infeed and substeel - Includes five days of startup with both a MIT and Cooper technician. This machine does not include any setworks, so you can use whichever system you want to. Setworks can be added at an additional price. This machine has a smaller footprint than a conventional carriage. The modular unit allows for lower installation and start up costs. Built heavy with a combined modular weight of over 90,000lbs. This machine is currently disassembled for shipping. It's priced ready to move. For more information, give us a call.

Corley 3 Head Block Carriage

Corley 3 Head block Linear Positioning.

4 head block EDMISTON carriage. Complete system operated less than a year. Includes: 4 strand X 25' long log deck; stop and loader; husk with off bearing belt; saw arbor with driven sheave and 125 HP motor; hydraulic, chain type log turner; 50 HP hydraulic power unit with tank; operator's cab with controls; track frame is in 3 pieces and includes end bumpers. In excellent condition $48,000 OBO. OTHER EDMISTON'S AVAILABLE. CALL.

Approximately  60' of 100 lb. rail, unmounted, for mounting on track frame made from 8" x 14" steel beam; track frame includes 32" diameter cable sheave, air operated tightening, for 1" cable; track frame has 2 air operated x 14" diameter carriage stops; track frame centers approximately 51"; end of track frame has rails and catwalk. Price: $6,500.00.

Good conditon. Complete FRICK 4 head block carriage, size 01C; FRICK husk w/213 TYRONE-BERRY carriage feed & MELLOTT off-bearing belt, 2 saw blades, 200 HP motor & drive; MELLOTT log turner with hydraulic system; NO setworks. To be removed.

Complete Sawmill Operation - Like NEW w/ Late Model Equipment! INCLUDING: Fully Automatic Fricko 4HB Carriage, computerized setworks, air dogs, air flippers with muffler’s on all outlets, electric over hydraulic, 48’ tracks, hydraulic drive - 36” HMC Log Turner, 10’x22’ 3 strand log deck - 2019 Frontline Equipment Blower, 12 volt Hydraulic Oil Cooler - 2018 Meadows 36” Deluxe Edger, Like New, all hydraulic, with 16’ tailing belt also 14”x12’ up and down tailing belt, 24”x15’ live rolls, 36”x22’ live rolls drop deck, 18”x30’ belt conveyor, 40”x20’ belt conveyor, 40”x12’ belt conveyor, 10’x60’ rooftop green chain 3 strand, John Deere 8.1liter Power Unit, 260hp, shows 3340hrs. - 48” Morbark Chipper, complete set up w/ all hydraulics, John Deere 6068 power unit, 24”x20’ shaker, Chip Blower and fines blower - Timberwolf Debarker, all hydraulic, 10’x16’ 3-strand log deck with barn sweep, Ingersoll Air Compressor, Single Head, One twin head air compressor. All in EXCELLENT SHAPE! CALL 440-661-8954 for more information.

HMC AC50 Carriage. 4 headblocks spaced right to left 48"-48"-36" (1st & 2nd) 2nd & 3rd) (3rd & 4th). 5 sets of wheels. NO TRACK. 16' long frame+/-. Bottom turning dogs. 5 HP cam type setworks. NO CONTROLS. Replaceable wear strips on bunks and knees. $16,500.

HMC 3 Head Block Carriage

Lane Manual Carriage with Track and Moody's Improved Log & Taper Dogs

2001 McDonough Precision Duty 42" Carriage. 3 Knees. Pantograph, UHMW Cant Kickers, Brownsville Turners on each Knee. Needs to be rebuilt and will come with a 1 year warranty (same as new).

Salem 44” 3 HB, Tong Dong, Remote Control Carriage, Lineal Position W/ Pantograph, Track, Rails & Carriage Bumper w/ 30 HP Hydraulic Pack W/ Inovec Scanning & Saw Cab W/ Setworks W/ Tyrone 285-40C Carraige Drive (ref# 92)

2001 Salem 36" (3) HB carriage, 10 HP setwork motor air actuation pantograph