Sawmill Equipment For Sale

The #1 Portable Meadows Mill is a reliable used circular sawmill, equipped with essential features for efficient wood processing. It comes with two head blocks, with the option to upgrade to four if required, offering flexibility for various sawing needs. This right-hand mill ensures precision and ease of operation through its power receder, hydraulic dogs, and hydraulic feed system. An additional blade is included, providing value and readiness for continuous use. This sawmill is in good condition, making it a dependable choice for both small and large-scale timber tasks. With its portable design, it allows for convenient relocation and operation at different job sites, increasing its utility and appeal to users who require versatility and efficiency in their wood cutting endeavors.

Meadows #1 Mill, diesel power w/ Miner 332 edger, gas engine - Miner 332 portable edger – (2) saw, S/N 9700, rated 3” material, mounted on carriage, 4” rip fence, Kohler gas engine 25 HP w/ infeed & outfeed, (1) movable saw, additional saw plates, (4) adjustable legs that fold in, 20’ portable (2) strand log deck, hydraulic motor w/ hoist drive, H-78 chain, under carriage to relocate, Meadows # 1 24” (3) HB carriage, hand set works, hydraulic & electric dogs runs on phase converter w/ triple bearing husk frame, 56” inserted tooth saw, S/N 4MF-1439-94, chain type log turner w/ onboard hydraulics, foot control log dec, hand controls to actuate dogs & log turners, foot, blower under husk frame w/ discharge pipe, cuts 16’,14’ x 16” outfeed belt conveyor, (2) outfeed gravity roll case, axles for mobility w/ 60 Series 6-cylinder w/ PTO sheaves and fuel tank…$45,000 Also available with mill only both or one or the other can sell with mill. MILL MUST SELL FIRST Case 585E Construction King 4 x 4 forklift, S/N 409-05-9019, triple mast w/ rebuilt cylinder, 4,920 original hours…$16,500 International (early 90’s), gas engine w/ Serco 8000, S/N L3001 w/ outriggers w/ PTO & hydraulic motor & reservoir, 2,681 hours, 4BT Cummins engine…$16,500 Ref #207, Contact Ethan Mealer for more information (931) 607-4738

The 2 Strand Live Deck by Meadows is a robust and efficient component for sawmill operations. This used conveyor system, in good condition, spans 22 feet in length and is designed to streamline the handling of logs or lumber between different stages of processing. It features a hydraulic gearbox which provides reliable and smooth operation, enhancing the overall efficiency of your sawing operations. Equipped with stop and unloaders, this system ensures precise control over the movement and unloading of materials, minimizing downtime and enhancing productivity. The Meadows brand is known for its durable construction and dependable performance, making this live deck a valuable asset in any industrial setting. This equipment is particularly suitable for facilities looking to enhance their material handling capabilities without compromising on quality or performance.

Meadows #2 Sawmill w/ 50’ of track / (2) movable saw vertical edger, husk frame, carriage drive, log turner, mill is complete w/ (2) strand infeed log conveyor, green chain, barn sweep under head saw w/ outside incline stacking section, Detroit 450 KW genset, 150 HP head saw w/ all wire and conduit included, Ref #205

This used 3 Blade Meadows Edger by Meadows Mills is a reliable piece of equipment ideal for sawmills. It features a 4" x 36" cutting capacity, making it suitable for processing various board sizes with precision. The edger is belt-driven, ensuring smooth and efficient operation. It is currently in working condition, offering a cost-effective solution for wood processing tasks. This edger provides essential functionality for any sawmill operation, effectively optimizing the preparation of boards for further processing.

Meadows Gang Edger

MEADOWS MILLS 36 DELUXE STATIONARY BOARD EDGER -- Hydraulic board edger, all push button functions, and variable feed speed with flow control -- Complete hydraulic power source belt driven from mandrel of edger, includes oil tank and oil cooler -- Welded steel frame constructed with 6 inch channel and including legs -- Working height may be determined by buyer, standard is 36" -- Overall length of frame is 20 feet, bay is 36"; wide -- Four live bottom feed rolls and two overhead gravity pressure rolls -- One stationary saw collar and one shifting saw collar, each with a 16"; diameter split carbide saw -- 60 HP electric motor mounted on edger -- 480 volt magnetic motor starter -- Belt drive with belt guard -- Infeed table and outfeed tables with dead rolls -- Laser lights aligned with each saw

MEADOWS MILLS 120H Chain Log TurnerSpecifications: -- Hydraulic Cylinders: Two 2" x 12" with 1-1/2" diameter rod -- Turning Chain: #120 chain with 1" dog width and 13 bits -- Drive: H80TB13 sprocket with bushing, 80Q25 sprocket with bushing, #80 drive chain, and chain guard -- Drive Shaft: 2-3/16" diameter 1018 cold roll -- Idler Shaft: 2-3/16" diameter 1018 cold roll. Construction: -- Frame: Base constructed from 10" x 25.4 Lbs beam, feet constructed from 4" x 6" tubing, head frame: Constructed from 8" x 3" x 4" tubing -- Drive Motor: Charlyn 104-1253 hydraulic motor (or equivalent motor from alternate manufacturer) -- Hydraulic Requirements: 12 GPM & 950 PSI -- Controls: not included in the base price

MEADOWS MILLS 100H CHAIN LOG TURNER -- Hydraulic Cylinders: One 2" x 12" with 1 1/2" rod -- Turning Chain: #100 chain with 3/4" dog width and 13 bits -- Drive: H60TB13 sprocket with bushing, H60SDS25 sprocket with bushing, #60 drive chain, and chain guard -- Drive Shaft: 1 11/16" diameter 1018 cold roll -- Idler Shaft: 1 11/16" diameter 1018 cold roll -- Frame: Base constructed from 3" x 4" tubing, uprights constructed from 8" channel and 4" channel, head frame constructed from 3" x 4" x 3/8" angle and various flat bar -- Drive Motor: Charlyn 103-1032 hydraulic motor (or equivalent motor from alternate manufacturer) -- Hydraulic Requirements: 10 gpm & 950 psi -- Controls: not included in base price

MEADOWS MILLS 2-STRAND SAWMILL STOP-N-LOAD LOG DECK -- Deck strands constructed with 4" x 8" x 1/4" wall tubing -- Chains run in 4" channel lined with UHMW wear strips -- Hydraulic Cylinder: One 2" x 12" with 1 1/2" rod -- Chain is WR-78 -- Front and rear crossbars are constructed with 6" wide flange beam -- Sawmill style stop-n-load -- Hydraulic drive with Auburn (or equivalent gear box from alternate manufacturer) gear box -- Strand spacing is determined by buyer, standard is 6 feet -- Controls: not included in base price -- Legs may be included for an additional cost -- Log decks are disassembled and bundled for shipment

MEADOWS MILLS 3 STRAND SAWMILL STOP-N-LOAD LOG DECK -- Deck strands constructed with 4" x 8" x 1/4" wall tubing -- Chains run in 4" channel lined with UHMW wear strips -- Hydraulic Cylinder: One 2" x 12" with 1 1/2" rod -- Chain is WR-78 -- Front and rear crossbars are constructed with 6" wide flange beam -- Sawmill style stop-n-load -- Hydraulic drive with Auburn (or equivalent gear box from alternate manufacturer) gear box -- Strand spacing is determined by buyer, standard is 6 feet -- Controls: not included in base price -- Legs may be included for an additional cost -- Log decks are disassembled and bundled for shipment

MEADOWS MILLS 4 STRAND SAWMILL STOP-N-LOAD LOG DECK -- Deck strands constructed with 4" x 8" x 1/4" wall tubing -- Chains run in 4" channel lined with UHMW wear strips -- Hydraulic Cylinder: One 2" x 12" with 1 1/2" rod -- Chain is WR-78 -- Front and rear crossbars are constructed with 6" wide flange beam -- Sawmill style stop-n-load -- Hydraulic drive with Auburn (or equivalent gear box from alternate manufacturer) gear box -- Strand spacing is determined by buyer, standard is 6 feet -- Controls: not included in base price -- Legs may be included for an additional cost -- Log decks are disassembled and bundled for shipment

MEADOWS MILLS 2 STRAND DEBARKER STOP-N-LOAD LOG DECK -- Deck strands constructed with 4" x 8" x 1/4" wall tubing -- Chains run in 4" channel lined with UHMW wear strips -- Hydraulic Cylinder: One 2" x 12" with 1 1/2" rod -- Chain is WR-78 -- Front and rear crossbars are constructed with 6" wide flange beam -- Debarker style stop-n-load -- Hydraulic drive with Auburn (or equivalent gear box from alternate manufacturer) gear box -- Strand spacing is determined by buyer, standard is 6 feet -- Controls: not included in base price -- Legs may be included for an additional cost -- Log decks are disassembled and bundled for shipment

Meber SR900 Resaw

Must be ordered. MEBOR 19 degree tilted 56" vertical band mill with electric motor drive, 8" wide blade, movable guard. Carriage is a 48" hydraulic linear 4 head block with: 3, chain, on board, log turners; Servo, integral carriage drive; heavy duty common frame with rail; Operator’s control cab with Servo electronic controls. F.O.B. Slovenian factory. Call for pricing & delivery (6 months to Port 3/27/21) (336)269-2284.

MUST BE ORDERED. NEW MEBOR Debarker Model SLH-1200 with butt-end reducing unit. Maximum log diameter 50" x 16' logs x 30,000 lbs. Includes: 6 sets of heavy duty log rotation wheels-variable speed; variable speed debarking feed; log kickers; 40" long butt reducing head with knives and powered by 30 HP electric motor; automatic remote control of machine; longitudinal log rollers for positioning log on the carriage to work with butt-reducing head; 3 strand log deck with stop and loader; 2 heavy duty box frames to receive debarked logs. MACHINERY IS F.O.B.SLOVENIAN FACTORY. Call for current pricing & delivery (6 month delivery to Port 3/27/21). (336) 269-2284.

Used, 2016 MEBOR horizontal band saw. Model 1200 (48" diameter), 6" wide saw blade. 75 HP drive; used to cut lumber 3 years max; cuts 16' long logs, and has rail to extend to 24'. Electronic set works. Includes: MEBOR 16' log deck, 4 strands, with stop/loader, and MEBOR saw sharpener, Model BA. Will require factory trained start-up technician.  Located in warehouse in Biscoe, NC

MUST BE ORDERED. NEW MEBOR horizontal band saw Model HTZ 1200 PLUS to saw up to 48" diameter x 21' long logs x 34' OAL x 26,000 lbs. Includes: 60 HP motor driving 48" cast steel wheels; 2 log turners; 4 hydraulic log clamps; 4 driven hydraulic rollers; 15 HP heavy duty hydraulic system; automatic off-bearing belt; automatic slab/board drag back; double cut; 6" or 7" blade; easy controllable, high end electronic setworks. F.O.B. SLOVENIAN FACTORY. CALL BUTCH AT 336-269-2284 for pricing & delivery (9 months to Slovenian Port 1-24-25).

75 HP Hammermill

MEC Blower with 42" Inlet