Sawmill Equipment For Sale
3575 Results Found
Call for Price
Baker 16" Blue Streak Grade Resaw w/Cab & Setworks
$ 7,500
$ 75,000
SHOWCASE REBUILT! Baker 5 head resaw, electric drive, includes return belt and 1 turn table, PRICE INCLUDES A COMPLETE REBUILD AND A FULL WARRANTY!
Call for Price
Single head Baker resaw | 3 Phase 480V | 30HP | Capacity is roughly 6" wide x 6" tall
$ 60,000
2016 Baker 3665D Bandsaw Mill Two owner 65HP diesel Loaded 3500 hours New tracks, chains, wheels, sprockets, many hoses and bearings, lots of welding and straightening, new blade guides Spare wheels and parts included
Call for Price
Baker Products’ Self-Dumping Steel Hoppers can be used to collect almost anything. It has a reinforced base and continuous weld. When the hopper is full, you can easily pick it up with almost any forklift and dump it simply by pulling a lever. It has a lock, so the load will not dump by mistake. The Baker Self-Dumping Steel Hopper is a convenience every company should have. A. 2 yd (1,828 mm) 603 lbs. (274 kg) B. 2 yds (1,828 mm) 805 lbs. (365 kg) C. 3 yds (2,743 mm) 971 lbs. (440 kg) A. 44” (111.8 cm) 59” (150 cm) 69½” (176.5 cm) B. 45½” (115.6 cm) 57½” (146 cm) 64½” (163.8 cm) C. 55” (139.7 cm) 58” (147.3 cm) 71” (180.3 cm) Forklift Opening: 2½” (6.4 cm) high by 48½” (123.2 cm) wide
$ 10,500
.jpg?width=300&height=200&mode=pad)
Baker C Resaw with Return. Located in NY. #C929
Call for Price
$ 40,000
1993 Baker 4 Head Resaw Approx. 50 blades Size: 13' 2" x 1" x .035" x 1/2" Tooth Carbon Resaw Blade Saw 1 needs a new spindle. Hydraulic drive. New Main Breaker New Fuses A couple of Starters have been replaced. Approximately 6,240 Hours Baker 4 Head Resaw Specifications Guide System: Baker Low-Profile Flat Guide System with steel guide plates for enhanced precision. Saw Dust Outlet: Dimensions: 6"x6" (15.24 cm x 15.24 cm) square. Outlet Adapter: 90° adapter chute to a 4” (10.2 cm) diameter outlet. Rotation: Can be rotated for discharge in four directions. Recommended Airflow: 600 CFM (17 m³/min). Motors: Main Motors: 20 HP, 3-phase motor on each head. Inline Hydraulic Pump Motor: Cutting Capacity: 6" x 12" (15.24 cm x 30.48 cm). Feed System (3-Sided Feed Works): Rough-top belting for traction. Powered side feed rollers for smooth material handling. Non-powered hold-over wheels. Feed Speed: Fully variable, adjustable from 20 to 120 feet per minute (6 to 36 meters per minute). Delivery is available at the buyer’s expense
$ 65,000
1992 Baker 6 Head Resaw Six-Head "C" Saw 1 needs a spindle and wheel replacement. Approximately 8,320 Hours Serial Number 92-379 6 Motors (30) HP (37) Amps Mechanical Drive
$ 35,900
2018 Baker Model C 4 Head Resaw Well maintained Work ready Only selling to go to a smaller unit SN 18-4895
Call for Price
Baker Side Transfer Belt - Hydraulic drive, 5 1/2" x 40" side shift belt, 24" x 5', 21" belt.
Call for Price
Brand new...never used...still on the original pallet.
Call for Price
1997 Baker 4 HD Resaw with Full Return
$ 57,500
BAKER BBR-0 5-Head Horizontal Resaw;Specifications: -- 6" Wide x 12" high capacity Re-Saw. -- Standard spring blade tensioning system; 13'-2" x 1-1/4" x 0.035 blade provides thin kerf savings. -- Quick & easy blade height adjustments. -- 28" Diameter, CNC machined, dynamically balanced, all steel band wheels. -- Rough top feed belt combines with opposing side feed rolls. -- Equipped with: -- 20 HP High Efficiency, 3-Phase electric motor on each head. -- Variable feed speed from 20 to 120 FPM (6 to 36 MPM).
Call for Price
1994 Baker BBR-0 Single Head Resaw Hydraulic Belt Return 20hp Motor
Call for Price
BAKER - BBR0: Horizontal Resaw with Powered ReturnSpecifications -- 6" Wide x 12" high cap. -- Standard spring blade tensioning system; 13'-2" x 1-1/4" x 0.035 Blade provides thin kerf savings. -- Quick & easy blade height adjustments. -- 28" Diameter; CNC machined; dynamically balanced; all steel band wheels. -- Rough top feed combines with: Opposing side feed rolls. -- 20 HP High Efficiency, 3-Phase electric motor. -- Variable feed speed: 20 - 120 FPM (6 - 36 MPM). -- Includes -- Powered return conveyor.
Call for Price
Baker Mdl BE-O Stationary Edger With 15hp Motor, On Board Hyd Power
$ 20,000
.jpg?width=300&height=200&mode=pad)
$ 12,000
.jpg?width=300&height=200&mode=pad)