Mobile Wood Chippers For Sale
Category
Wood Chippers - Mobile
104 Results Found
$ 695,000
$ 599,000
CAT (755HP) 37" DIAMETER X 36" WIDE DRUM WITH (6) KNIVES 30" DIAMETER X 36" WIDE TOP FEED WHEEL 10 5/8" DIAMETER X 36" WIDE BOTTOM FEED WHEEL STANDARD 7 ½" INFEED CONVEYOR FORESTRY STYLE DISCHARGE WITH HYDRAULIC SIDE/UP OR DOWN END DEFLECTOR AIR COMPRESSOR DOUBLE GROUSER TACK PADS 62,000 LBS
2018 Bandit 250XP Chipper, 926 hrs, very good condition, good paint, diesel 120 HP, serviced. 12-1/2" x 19" opening Ready to go to work! $38,900
Call for Price
2009 Bandit 2590 Drum Chipper, C13 Cat 540hp, Radio Remote, Infeed chain, Rear hydraulic stabilizer's. Weight 36,500 lbs Width 119 in Height 139 in Length 360 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 115,000
2010 Bandit 2590, Whole Tree Drum Chipper, C-13 Cat 440HP 5465 hours, Remote, Infeed, Front and rear hydraulic stabilizers. Weight 36,500 lbs Width 119 in Height 139 in Length 360 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 400,000
$ 65,000
Bandit 990TK Tracked 12" Chipper. Remote Control, Low 380 Hours. Chipper in excellent shape. Call today.
Call for Price
FARMI CH 100 F is designed as a robust and inexpensive disc chipper for landscaping to chip branches and small trees up to a diameter of 100 mm. The FARMI CH 100 F can be mounted onto a small tractor giving a compact chipping machine in gardens, parks, yards and road sides. Two knives and an anvil take care of chipping and feeding. CH 100 F chipper is available as a tractor PTO versions or as a hydraulic driven option.
2002 MORBARK 30RXL WHOLE TREE CHIPPER ENCLOSED CAB WITH HEAT AND AIR CAT V-12 MORLIFT 1000 BOOM READY TO GO
MORBARK 27RXL WHOLE TREE CHIPPER BAD MOTOR V-12 CAT LOTS OF NEW PARTS DISC SHAFT BEARINGS DECK CHAIN AND SPROCKETS JUST WENT THRU CHIPPER AND MOTOR THREW A ROD LOTS OF NEW PARTS JUST NEEDS MOTOR
2016 Morbark Beever M12D 1,237 Hours Auto Feed 89hp Power Solutions International (PSI) 3.0L gas motor TorqMax Feed Wheel Compression System Hydraulic Lift Yoke Cylinder 53" Folding Feed Table 18" x 12" Throat Capacity Fully serviced with new fluids, filters, tires, wheels, knives, battery and rain cap 360 Degree Rotating Adjustable Chute LED lights
1992 Morbark Model 27 Whole Tree Chipper Cat V12 800 HP Engine Currently in production PRICE REDUCED
Call for Price
Morbark 30-36 Portable Chipper 350HP Cummins Approx 4000 Hrs self Feeding Grapple Up to 18" Dia Material
2008 MORBARK TYPHOON 20 CHIPPER -400 horsepower John Deere(rebuilt within the last five hundred hours) -new injectors and new injection pump new fuel pump -new head -new belts -hydraulic pumps -replaced all hydraulic valves -new brakes -all new fluids and filters -new paint chipper has remote control to that works -recently put on 12000 pound winch on back
1992 MORBARK 30RXL WHOLE TREE CHIPPER ENGINE 3412 860HP STARTS AND RUNS GOOD 3 KNIFE, GOOD PADDLES, GOOD FACE PLATE, FEED DECK CHAIN NEED WORK CHIPPER IS WORKING EVERYDAY FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM
Call for Price
1994 Morbark 23 WCL Whole Tree Chipper Engine is a 3412, Seperator, Enclosed Fold Down Cab with Heat, 6 Sets of Knives and New Anvil, Ready for the Woods Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
Call for Price
1996 Morbark Model 20 Whole Tree Chipper ,Caterpillar 425 HP Engine, Enclosed Cab with Heat and AC, Needs a Condenser for the AC, Machine has Separator ,Ready for the Woods... Overall Length 21’6” Overall Width 8’0” Overall Height 13’6” Weight 10,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
Call for Price
2016 Morbark Model 23NCL with Separate Flail 223 Debarker, Caterpillar C18 Engine with 8,200 Hours, New Clutch 3 months ago, New Water Pump, Caterpillar 9.3 on Flail with 9,000 Hours, New Bottom Flail, New Head and Injectors, Bark Pusher, New Pads, Ready for the Woods Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 114,900
2007 Morbark Typhoon 20 Whole Tree Chipper, Equipped with Loader and Operator Platform, John Deere 325 HP Turbo Diesel Engine, New Completely Rebuilt Engine with 20 Hours, 6,000 Frame Hours, Hydraulic Tongue Jack , Autofeed System, No Winch . Great Running Machine... HEIGHT 11' WIDTH 8' LENGTH 26'8" GROSS WEIGHT 18,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.