Tyler Gang Saw For Sale
Category
Gang Saw
Manufacturer
Tyler
2 Results Found
$195,000
TYLER 2400 SLAT WALL MACHINE: -- Specifications:Produces T-slot "slat-wall" for architectural/store fixtures. 4' x 8' (48" x 97") max. panel cap., 2' x 2' (24" x 24") min. panel cap., min. panel thickness = 0.5" max. panel thickness = 1.5"; The Tyler 2400 can machine up to (40) panels/Hr, depending on material density, thickness and the slot profile. -- Equipped with: (18) Router spindles all on 3" fixed centers, spindles are driven in groups of (3) with (6) 7.5 HP - 3,450 RPM motors, all router spindles rotate @ 15,400 RPM. -- Operation: Panels remain stationary on top, pneumatically clamped in place while the bottom mounted router bank traverses the full length of the panel with a high speed return, variable feed speed control, router assembly traverses on ground & polished rails with chain drive. -- Panels are positioned along the 8' rear edge fence line, distance from the panel edge to the centerline of the 1st cut can be adjusted from 0.0" - 3" (1 router spindle pitch). -- Overhead holddown assembly with (2) large air cylinders and (5) arms with spring loaded clamping pads hold the panel in place. Panels are loaded from the 8' front and exit to the side. -- Includes: Operator controls for the machine cycle and a "setup" mode of operation; machine cutting cycle is initiated by a 2-hand operator safety buttons located on the right front of machine. - Produces approx. (30 - 40) panels per hour. -- Available Options at Additional Cost:Router spindles on 4' & 100 mm centers; 48" x 121" workpiece capacity increases left-to-right workpiece (length) capacity;60" x 97" workpiece capacity increases front-to-back workpiece (width) capacity & includes (1) additional multi-spindle router head;60" x 121" workpiece capacity increases front-to-back & left-to-right workpiece capacity & includes (1) additional multi-spindle router head.
$52,900
TYLER 2400 SLAT WALL MACHINE:Produces T-slot "slat-wall" for architectural/store fixtures.Specifications: -- 4' x 8' (48" x 97") Max. panel cap., 2' x 2' (24" x 24") min. panel cap., min. panel thickness = 0.5" max. panel thickness = 1.5"; -- The Tyler "2400" can machine up to (40) panels/Hr, depending on material density, thickness and the slot profile.Equipped with & Operation: -- (18) Router spindles all on 3" fixed centers, spindles are driven in groups of (3) with (6) 7.5 HP - 3,450 RPM motors, all router spindles rotate @ 15,400 RPM. -- Panels remain stationary on top, pneumatically clamped in place while the bottom mounted router bank traverses the full length of the panel with a high speed return, variable feed speed control, router assembly traverses on ground & polished rails with chain drive. -- Panels are positioned along the 8' rear edge fence line, distance from the panel edge to the centerline of the 1st cut can be adjusted from 0.0" - 3" (1 router spindle pitch). -- Overhead holddown assembly with (2) large air cylinders and (5) arms with spring loaded clamping pads hold the panel in place. Panels are loaded from the 8' front and exit to the side. Includes: -- Operator controls for the machine cycle and a "setup" mode of operation; machine cutting cycle is initiated by a 2-hand operator safety buttons located on the right front of machine. - Produces approx. (30 - 40) panels per hour. -- There is a large inventroy of spare parts available that can be sold with the machine. NOTE: Only the TYLER model "2400" machine shown in the work cell is available for sale. Spare Parts list: ● WARSAW MACHINERY E-9112-ASSY SPINDLE STD HTD GREASE PACK SLAT WALL ..qty-2 ● WARSAW SHAFT IDLER PANEL ROUTER Slat Wall ..qty-2 ● WARSAW MACHINERY - G-0186 - PULLY IDLER PANEL ROUTER Slat Wall ..qty- 3 ● WARSAW MACHINERY G-0191 - SPACER BEARING IDLER Slat Wall ..qty-7 ● WARSAW ASSY FOOT CLAMP OVERHEAD SLAT WALL ..qty- 8 ● WARSAW MACHINERY-04B1F-COLLET SLAT WALL ..qty-5 ● WARSAW PAD RUBBER 1.5DIA SLAT WALL ..qty-24 ● WARSAW KEY WOODRUFF 1/8X.5 SLAT WALL ..qty- 9 ● WARSAW MACHINERY- 5D1AG - RING RETAINING INT 1.181 (SNAP RING)SLAT WALL ..qty-8 ● SPACER, BRG, SPINDLEM STD SLAT WALL ..qty-12 ● DRIVE PULLEY HTD 3MM 131 GROOVE SLAT WALL ..qty-1 ● WARSAW FLANGE PULLEY FRONT SLAT WALL ..qty-7 ● WARSAW FLANGE PULLEY REAR SLAT WALL ..qty-6 ● PULLY HTDM 3MM 30GR STEEL SLAT WALL ..qty-18 ● WARSAW MACHINERY-E-7138-ASSY PULLEY SPINDLE HTD 30 GROOVE SLAT WALL ..qty-4 ● ASSY HEAD ROUTER 3SP 3'HTD SLAT WALL ..qty-1 ● WARSAW Belt HTD 735 3M 25 PL SLAT WALL (7353M25) 3B4BD 10785 ..qty-5 ● Fan for Baldor Motor Slat Wall ..qty-2 ● Motor Fan For Slat Wall ..qty-2 ● BRG BALL S 2 0 .3937B idler shaft roller SLAT WALL ..qty-13 ● BRG Ball 5 2.0 6693B SLAT WALL ..qty-6