Biomass Equipment For Sale

NOVA PELLET - N-Plus - 165 kW, ...Pellet Mill with low specific energy consumption per ton of pellet. -- Capacity: 2.2 - 2.8 Tons/Hr (2.0 - 2.5 metric tons/Hr) depending on the raw material. -- Main drive: 215 HP (160 kW). -- Pellet dimensions: 0.24" (6 mm) Diameter. -- Raw Material: Wood chips, sawdust, wood shavings; 0.02" - 0.06" (0.5 - 1.5 mm) length; 8 - 14% MC -- Die: 22.8" (580 mm) internal diameter; 0.6" - 2" (14 - 50 mm) long die holes. -- Roller: 9.4" (245 mm) Outer diameter.General Specifications: -- Pellet Mill with mechanical and electrical functioning system. -- Pellet Mill with (1) die and (2) Rollers. -- Electrical cabinet with SIEMENS PCL system, touch screen, and remote modem connection. -- High efficiency motors with IE2 standards (Energy Saving). -- Raw material dosing system (frequency controlled). -- Mechanical level sensor for the saw dust hopper. -- Vegetable oil for start and finish of production cycle. -- Automatic grease lubrication for rollers and main shaft. -- Electrical safety locks. -- CE conformity certificate.

Complete Wood Pellet Manufacturing Plant including Dryer and Bagging Line. -- Capacity: 0.9 - 1.3 Tons/Hr (0.8 - 1.2 metric tons/Hr). -- Raw Material: Wood chips, sawdust, wood shavings. -- Power: 335 HP (250 kW) Installed, 295 HP (220 kW) average.The Pellet Plant consists of the following main components: -- (1) Wood Chip Hopper: 706 cu. ft. (20 cbm) volume; includes Discharge Screw, Motor. -- (1) Rotary Drum Dryer: 1.0 - 1.2 tons/Hr (0.9 - 1.1 metric tons/Hr) dry material capacity, moisture reduction from ...25% to 12% (Optional: Dryer for higher moisture contents); includes: Cyclone, Rotative Valve, Electrical Cabinet with PLC (Optional: additional Dust Filter). -- (1) Biomass Burner: Approx. 695 Lbs/Hr (315 kG/Hr) Wood Chips, max. ...45% moisture content. -- (1) Magnetic Separator. -- (1) Hammer Mill: 1.0 - 1.4 Tons/Hr (1 - 1.3 metric tons/Hr) dry material capacity, 100 HP (75 kW) installed power, 1.2" x 0.78" x 0.2" (30 x 20 x 5 mm) max. grain size. -- (1) Dry Chip Silo: 565 cu. ft. (16 cbm) volume, 124" (3,150 mm) diameter, 321" (8,150 mm) height; includes: Dust Filter, Pulse Jet Cleaning System, and Safety System with Spark detection, Rotative Valve. -- (2) Pellet Mills (Type: N-MIDI): Each 1,100 - 1,540 Lbs/Hr (500 - 700 kG/Hr) capacity, 74 HP (55 kW) main drive; includes: (1) x Die, (2) x Rollers, Electrical Cabinet with PLC. -- (2) Vibrating Screens. -- (1) Pellet Cooling Column. -- (1) Packaging Line (Type: N-Pack): Manual operated line includes: Screen, Conveyors, Storage Hopper, Pneumatic Valve, 15 kG Bags, semiautomatic Pallet Wrapping machine. -- Auxiliary Equipment: Conveyors, Ducts for Dedusting, Fan for Silo loading, etc. -- Shipment to US port, Mechanical & Electrical installation, start-up, and training included.

Omef Mulcher

Omef Tree Shear " Big Inch" OMEF Big Inch was born from the idea to combine simplicity, efficiency and versatility in a single machine, joined with an in-depth design and engineering study. The result is a worldwide success: designed to work on all types of wood, "Big Inch" is able to grab, cut and hold the plant at the same time. The efficiency of the "Big Inch" shear is granted by the quality of raw material used. OMEF relies only on wear resistant XAR steel that makes the tree shear incredibly strong and robust and it ensures an outstanding performance even in the most extreme working conditions. The integrated blade, which provides the highest levels of resistance, hardness and toughness, has a patented and unique profile in the world, making "Big Inch" capable of cutting down plants with a quick and neat cut. Based on these elements, OMEF has developed the largest range of tree shears on the market with six models available. Big Inch can be fitted on operating machines starting from 2 t up to 50 t and it can be customized with several accessories able to increase the efficiency and productivity, offering the best tailor made solution for all forestry professionals.

18MM BTU Gas Burner For Drum Dryer.

Silo is 40’ Tall, 18’ wide, 14” auger, and has the Laidig unloader. #CC011

(2) 14 Unit Peerless Chip Bins Down and Ready to ship.

PELLET.TOWER Pellet Manufacturing System. -- Complete modular, vertically designed Pellet Manufacturing System within a 65' tall free-standing tower containing all the Pellet Manufacturing equipment necessary on a 17' x 20' concrete pad including all pellet producing material handling & conveyor systems. -- 25,000 - 30,000 Tons annual pellet capacity from wood or agricultural waste streams. -- Tower includes: (6) Levels, vertically integrated on top of each other; an operator monitoring station is located at the ground level, processing equipment is in the top (5) levels. -- Each level has direct "walk-up" service and maintenance access without personal lifts, ladders, or other access devices. -- Complete integration of electric power supply & panels, Compressed Air, Air Filters, and Dust Collection, with safety controls linked throughout the automated system. -- System designed to run and be maintained by (1) on-site operator or off-site with remote PC monitoring of the entire process. -- Each level includes high quality brand name equipment: Hammer Mill at the beginning of the process, Material Holding & Dosing Bin, as well as the Dust Collection & Air Handling system at the very top of the Tower. -- Binding Agent System, multiple Foreign Material Separators, Water Dosing with moisture control; Ripening Silo; high production Pellet Mill, Pellet Cooler, final Screening Station on levels below. -- Includes following auxiliary equipment: Process Control with full Visualization (on Monitors), Fire Protection, Explosion Prevention, Dust Collection, Spark Detection, Water Distribution, Compressed Air, and a Central Vacuum Cleaning System that makes all a clean enclosed work environment. -- The 6-levels are in a completely self-contained steel structure, enclosed with insulated sandwich panels and weatherproof cladding. -- Post-installation, in case of relocation, the Tower can be divided into (4) units for transportation on flatbed trailers; dismantling & reconstruction requires approx.(6) weeks. Pricing includes "delivery to site, installation & training". Please ask for full quote with all specifics - and geared toward your location, material, and application!

3 flail chipper with 3412 cat engine, Prentice 180D picker, tri-axle, up-graded 3 flail to the H Model orientation. Engine rebuilt with a refurbished cat block, 950 hours since rebuilt. Total reversing flail from cab. Flail speed set mechanically using pump stroke limiters. 65" shiv, hydraulic system with air clutch, babbit knives. Twin disc clutch rebuilt 2000 hours ago. Was used to chip hardwood with a bark content of under 3%. Paddles and anvil replaced in the last 2000 hours. Frame has an estimated 13,000 hours. Well maintained and in good working condition.

Good condition, Woods ready.

Peterson 4800 Flail Debarker Wireless remote controlled Reman engine Runs and operates good

2005 Peterson 5410 Grinder -5800 hours -CAT 3412 Engine 1000H.P -Needs a discharge belt -New feed chains -New tip protectors

Remote control

2006 Peterson 4710B Tracked -6720 chassis hours -Remanufactured engine installed on machine as the old clutch destroyed the engine -Done by CAT dealer in NC (GregoryPoole) -Reman engine 530hrs -New clutch installed the same time as reman engine installed -Feeder floor 30-40% life left -Rotor balance is good -New main conveyor belt just installed -New main conveyor head motor installed -New skirting guard deflectors installed under rotor -New set of screens in machine I think they are 3" -New clutch module and harness -New Iqan electrical panel upgrade system installed by Peterson rep -C18 T3 caterpillar 755HP -Twin disc clutch Ready to work

2008 Peterson 5900 Tree Chipper -10560 hours -4000 on complete rebuild -Works as it should -Tires good -Two boxes of key knives

2019 Peterson 5000H Chipper -9500 frame hours -Complete Cat rebuild done at 6800 hours -4 flail -Loader -Tons of service receipts and very clean machine Videos upon request

2003 Peterson HC5400 Grinder -7700 hours -New set of bananas, grates, and teeth -Has a wireless remote -Rotor recently balanced and serviced -New tires ands wheel bearings on axle -Comes with 25K worth of parts MACHINE RUNS AND WORKS BUT NEEDS A FEW MINOR REPAIRS -Has a hole in the metal plate that covers the rotor -Has a small leak in the fuel tank we currently use an auxiliary tank -Intermittent issue of conveyor not feeding. Believe it is a broken wire

2014 Peterson 4300B -6,000 frame hours -Current hours on engine and rebuild 100(C18) -New rods and mains -New turbos -New pumps -Valves -Infeed floor and chains -6 new knives -New fans -Wiring -Tires are 90% brakes work

2018 Peterson 5710D -1,100 original hours -Owner used very few times -Belts are good -Tracks and Undercarriage are good Like new machine !!!!!

2011 Peterson Pacific Horizontal Grinder Power Source: Diesel Engine Mfr: Cat Engine Model: C27 Horsepower: 1000 Has approximate 9050 hours