Equipment For Sale

JLT CLAMPS - 79K-7-M, ...Clamp (Door, Double Miter) Large cap. Miter Door Clamp with: 38" x 84" Max. cap., (2) vertical and (2) horizontal pneumatic clamps. -- Each clamp includes: JLT Dial control system for fine adjustments. This innovative dial control system allows for adjustments in both directions while the door is under clamping pressure. -- Also, successfully clamp and square stile & rile cabinet doors.

JLT 79F-16-PC Multi Level Panel Clamp16' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (36) clamps total manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps # 302-40-H-R with 40" opening with a 3-1/2" high x 4" wide jaw. -- (72) # 80-1706 Rocker adaptor plates for up to 6" thick glue stock -- (1) Fastener and shim kit for precise clamp alignmentAvailable Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,500 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,200 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,350 -- Clamp 3 1/2" X 40" opening ... $ 149 -- 79-1680-Handle $110 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 16' x 52"W x 70" high

JLT 79F- 6-PC Multi Level Panel Clamp6' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (8) clamps manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps have a 40" opening with a 3-1/2" high x 4" wide jaw. (52" clamp available upon request)Available Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,500 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,200 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,350 -- Clamp 3 1/2" X 40" opening ... $ 149 -- 79-1680-Handle $110 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 75" x 70" x 48" high

JLT 79F-8-PC Multi Level Panel Clamp8' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (18) clamps manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps have a 40" opening with a 3-1/2" high x 4" wide jaw.Available Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,500 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,200 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,350 -- Clamp 3 1/2" X 40" opening ... $ 149 -- 79-1680-Handle $110 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 100" x 70" x 48" high

JLT CLAMPS - 79X-5-DM: Dual Station Miter Door Pro5-Section rotating Clamp; 26" x 42" max. cap.; 4" x 12" min. cap.; 2-1/2" max. thickness capacity. -- (2) Horizontal & (2) Vertical Clamps for: Applying pressure to Mitered Doors. -- Recommended for miter and stile & rail doors. -- 1-Lever operation; clamp & square a door in (2) seconds; 500 Lbs of clamping force per cylinder; machine rotates counterclockwise for safety.

42” Capacity Pneumatic operation

JLT 79F-12-PC Multi Level Panel Clamp12' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (6) clamps per level (a total of 30) manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps have a 40" opening with a 3-1/2" high x 4" wide jaw.Available Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,500 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,200 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,350 -- Clamp 3 1/2" X 40" opening ... $ 149 -- 79-1680-Handle $110 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 144" x 78" x 52" high

JLT CLAMPS 78H-12-42-40 Mini Pod PressSingle section 12" wide x 42" long cap., 40" max. opening, 13" daylight, 30 ton max.,clamping pressure at 120 PSI, Pod Press is powered by a total of (18) 20 square inch diaphragm cylinders, upper platen has a 2" stroke when air is activated.Features: Heavy duty upper and lower steel platens, single lever valve pneumatic operation with dial regulator pressure controls, stack multiple wood components up to 12" wide and ships pre-assembled. Includes: Manual jack for platen adjustment.

JLT Clamps 302-40-H-R DOOR AND PANEL CLAMP40" Capcity clamp (min 8-1/2") Patented Equalizer Design Provides Equal Clamping from the Front and Rear Jaws, Resulting in a Higher Quality Panel. #302 Style Clamp with Standard 3-1/2" High Jaws for Increased Durability and Less Clamps Per Glue Up.Also available with 36", 44" and 52" capacities.

PVC Pipe C900, 16 inch - 20ft, 16 DR 18 EB, (un-used) Made by: JM Eagle 50, 20ft pieces available Contact us for a price including freight Additional photos coming soon Product # 248831 PVC 235 PSI DR18, 16” x 20ft C900 – 16BL MFG. Date: 10/27/22

Jocar MDL 1600-23063 Horizontal Resaw System w/125HP Motor, 40' Outfeed Rollcase, Infeed Power Pack, Tipple System, Infeed Rollcase, Cant Positioner, Cant Turner, 20HP Hyd Power Pack, 50HP Power Pack System, Cleereman 5' x 6' Control Cab & Computer Setworks.

MUST BE ORDERED FROM FACTORY. VERTICAL ARBOR SLAB RECOVERY GANGS are designed to process 3 sided slabs into pallet boards. Ten (10) vertical, interior feed rolls are standard. Variable speed feed system up to 175 FPM. 2" automatic cant variance allows both 3 1/2" and 5 1/2" wide cants to be run back to back with no operator involvement or machine adjustments. Machine utilizes one bottom "clean-up" saw to eliminate irregular shaped pieces assuring flat, square pallet boards. 30" to 60" lengths. Can be partnered with a slab edger and trimmer to recover boards with NO operators. PRICES RANGE FROM $185,000 to $215,000 depending on the model and options.

JOCAR BAND SAW: Model 1600/230; very heavy duty rectangular tubing column;  63" diameter wheels with wheel guards; right hand machine;  vertical sawing; 9" face width; kerf approximately .125"; pressure guides;  complete with 125 HP electric motor, drive and guard; hydraulic strain; top wheel tilt and hydraulic power unit.  Price includes loading onto your truck. PRICE $35,000.00. 

7" Wide Band, 19" Bed Width, Approx 48" Dia Band Wheels, Stacked Cylinder Setwork. Includes Hydraulic Unit, 3 Strand Transfer Deck, In-feed Roll-Case With Cant Turner, Out-feed roll-case, Out-feed Cant Deck-Dead Roll, Saw Cab. For Resaw Only- $50,000.

Grinder for edgers

Cuts with a 16" carbide tipped saw blade 240V/480V 3 phase 7-10 seconds per cycle

1986 John Deere 850B New sporckets and rollers Hours unknown Runs and operates good

20.5 Tires, 3 Spool, Aux Hydraulics, Cab w/ AC, Forks, Front Diff Lock, General Purpose Bkt, Ride Control, ROPS, Tool Carrier

20.5 Tires, Aux Hydraulics, Cab w/ AC, Forks, General Purpose Bkt, Quick Coupler, Tool Carrier

20.5 Tires, Cab w/ AC, Forks, General Purpose Bkt, Heated Seat, Quick Coupler, Rear Camera, ROPS, Tool Carrier