Equipment For Sale

Brewer 3-Head Resaw | 1998 | 480V | GE2000

Brewer GE2000 2HD Band Resaw

Designed to remove saw dust from boards 30" to 72" long x 3" to 8" wide x 3/8" to 2 ½" thick. Unscrambler style feed with four strands of #2060 chain and ½" tall dogs feed boards from a lower hopper singular and sideways through 8" diameter upper and lower spiral, nylon drum brushes.

BREWER - Single-Head, ...Horizontal ResawWith the following features: -- 15 HP Motor. -- 6-1/2" Wide x 6-1/2" thick resaw cap. -- 2-Belt drive; 36" working height from the floor. -- Variable speed hydraulic drive with: Top and bottom powered tire and belt; 30" dynamically balanced band wheels at 900 RPM for vibration free running. -- 1" or 1-1/4" Wide bands.NOTE: No Return Conveyor System.

Brewer Step Planer 24in, BR425, S/N 12286, 50HP Electric Motor Up to 6" thick

--This machine is in Auction @ https://exfactoryauctions.com/Detail/PM-231011/event/A122024$1. --NO RESERVE! BRIANZOLA SIMCOR 10" W Rotary Embossing Press Specifications: Max. thickness 4" (Depending on head diameter). Equipped with: Slotted table, with 11-1/2” x 3/4” Adjustable left & right material guides. Fixed arbor, with 1 HP - 1,700 RPM - 260/440 V Motor & Adjustable arbor support. 19-1/4” L x Approx. 10” Dia. Motorized smooth steel feed roller synchronized with arbor, Electronically-controlled feed speeds. Complete with: 8” Dia. x 1” W Embossing Head.

WANTED BROCKWAY CABOVER, it will look like a F model Mack. Call Aaron 828-284-0145 or Ethan 828-284-5805 (Picture for attention / example)

2011 Bron 700 Mulcher, Tyalta Mulching Head, Currently Has 2640 Hours, Cat C18 700HP Engine, Berco Undercarriage D7 with 36" Single Grouser Pads. Engine and Hydraulic Heater for Cold Weather Starting, Backup Camera and 2 Internal Cameras, Touch 1 Digital Display, Fire Suppression System, And On Board Air Compressor. Unit has been completely serviced and is ready to go to work. Please Call for more info

Bronco Pallet Nailing Line. Located in Illinois. #C960

This machine was removed from production about 5 years ago in working condition. Currently under power. Seller believes it to be about 12 years old. Set up for 30x42 3-stringer w/3 bottom & 6 top decks: will do up to 40x48 Production rate they did was about 250-275/day per 8hr shift Does not have all of the inline air filters & water traps. Seller does not use the bottom spacers Machine needs some tubing and minor parts to get the bottom pop-up spacers functional. 110V

This machine was removed from production about 6 months ago in working condition. Has a new motor for the machine and just needs to be wired up.

New conveyor system that is NEW/NEVER INSTALLED. Everything is ready to load and will take approx two full flatbed trucks to move. See photos for all specs.

2017 Brother 400BM Shaving Machine Operation

Bruning and Federle, 33" blower, 20hp Siemens electric motor

Saw Dust Diverter. 78" long with diverter valve and handle. 22" x 18" opening. Offered as-is/where-is, as removed from service. Call Brian 336-269-1238 for details and pricing.

Saw dust fan 66" outside diameter. 12 blades on 2/7/16" shaft. 18" x 22" discharge opening x 18" round inlet. Price includes a 50 HP motor and both sheaves. Offered as-is/where-is, as removed from service. Call Brian 336-269-1238 for details and pricing.

BRYAN CL 240-W-GI BOILER, HOT WATER TUBEThis Boiler was taken out of an Office Furniture Factory where it was used to heat drying tunnels to a temp of 120 F.Disconnected and in storage for 1-1/2 years.Details & Specifications:Model: CL240-W-GIInput MBH: 2,160/1,080Output MBH: 1,728BRYAN #: 971292Relief Valve Setting: 50 PSIGHeating Surface: 287 sq/ftMAWP Water: 60 PSIGNational Bond #: 41033Canadian Reg #: E6190.25Gas Data:Natural GasMax Input CFH: 2,160Min. Input CFH: 1,080Min. supply Pressure: 7 In. WCMax supply pressure: 14 In. WCManifold pressure in WC: 3.5Orifice size: DMS 29

Bryan Low Pressure Boiler, Fuel Oil fired

2008 Buckeye 7200 Magnum -6,791 hours -350 horse power -Selling it with the machine side of GPS (basically no base station). -Has a Buckeye made slim line wheel on it right now that installs up to 8" pipe. -Have the regular wheel that came with the machine that we can change back to if the buyer would prefer or sell both for a deal -Regular scheduled maintenance and oil samples -Schaeffer oil has been used, owned it since 2011

BUILDERS AUTOMATION (BAM) 2220 Stair Wedge Cutter. Automatically cuts wood wedges used to lock stair treads and risers into slots in stair stringers.. -- Equipped with: 10" Dia. saw blade with 1.5 HP direct drive motor, hopper feeds material automatically, air operated with 6 CFM compressed air requirement, 1.8 Sec/stroke. -- Features: Auto-shutoff feature and capability to cut glue blocks. -- Upright guide expandable to hold up to 40 pieces of wood at one time -- Rapid changeover to cut glue blocks for more efficient operation -- Once cycle started, hands-free use for labor-saving utilization -- Enables you to easily change size or angle without tools saving time and improving productivity -- Utilizes a 1.5 HP saw that automatically cuts pieces up to 9-1/2" W x 11-1/2" L -- Operator panel includes key start and e-stop controls for the saw motor and start/stop control for the pneumatic system that coordinates all machine motions -- Capable of producing wedges of varying thickness on alternate strokes of the saw -- Scrap material is ejected under the machine, and the wedges are discharged into user-supplied hoppers -- An included discharge chute diverter separates automatically and directs wedges of different thicknesses (produced on alternate saw strokes) into separate hoppers (user-supplied) -- Sawdust carried away from the saw guard pick-up through a 3" diameter hose -- Comes with manufacturer's standard 1-year warranty -- Complete with: Self-diagnostics, built-in starter, automatic shutoff feature, air filter & lubricator.