Pallet Equipment For Sale

MEREEN-JOHNSON 419-DC Gang Rip SawSpecifications: -- 19" Arbor cap., -- 14" max. dia. tooling, -- 3-1/2" max. manual thickness adjustment, -- 29" min. length for glue joint accuracy and 22" min. for busting only, 6" throat.Equipped with & Features: -- 75 HP - 3,600 RPM drive motor with direct drive to arbor. -- Feed & chain: 3 HP Variable feed speed 30 to 150 FPM, -- M-J "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain, hardened dip cams, extruded structural aluminum feed bed slats with replaceable steel backed rubber insert strips, and chain oiler. -- (4) 3" Dia. spring loaded overhead pressure rolls (with new springs); full width spring loaded overhead bed plate, pressure rolls and bed plate unit with scale & pointer thickness reference; anti-kickback finger system , -- (1) lower & (2) upper on infeed (kickback fingers are newly replaced). -- (2) Upper dust hoods (1) 10" & (1) 5" dia., and (1) lower 4" dia. hood; requires 3,820 CFM; -- Notice the feed chain - it's in exceptional condition!Note from the seller -- Mereen Johnson model 419 DC straight line gang rip saw. Glue joint capable 19"; width 4"; height capacity75 HP. 480 Volt. This is a very good machine with low hours and runs great . Two arbor sleeves with spacers and blades and a Set of new rubber inserts

MEREEN-JOHNSON Model 524-DDCSR 2+4 Double Arbor Gang Rip SawSPECIFICATIONS: -- First Arbor Arranged with Two (2) Independently Adjustable Select Saw Assemblies for Mounting Hogging Blades -- Second Arbor with Four (4) Independently Adjustable Select Saw Assemblies -- Arbor Space 24" -- Thickness Capacity to 1-3/4" with 12" Tooling and 2-3/4" Using 14" Tooling -- Minimum Length 30"Equipped with & Features -- Two (2) M-J Direct Drive Motors 75 HP Each -- Feed Motor 7.5 HP TEFC, 30' to 235' rate with Frequency Inverter Speed Control -- Saw Set Up for Second Party Optimizing System.

Mereen-Johnson 424 Gang Rip sawSpecifications -- 24" Arbor cap., -- 14" max. dia. tooling, -- 3-1/2" max. manual thickness adjustment, -- 14" min. length for glue joint accuracy and 22" min. for busting only, -- 6" throat. Equipped with and Features: -- 75 HP - 3,600 RPM TEFC Direct drive motor, -- 2-3/16" dia. arbor with disc brake, -- Load meter and slip-off outboard bearing. -- Feed & chain: 3 HP Variable feed speed 30 to 170 FPM, -- M-J "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain -- "Quad Life" hardened dip cams -- Extruded structural aluminum feed bed slats with replaceable steel-backed rubber insert strips --, Automatic chain oiler. -- (4) 3" Dia. air-loaded overhead pressure rolls; full-width spring-loaded overhead bed plate, -- Pressure rolls and bed plate unit with scale & pointer thickness reference; -- Anti-kickback finger system with (1) lower & (2) upper on infeed. -- Sound enclosure, -- (2) Upper dust hoods (1) 10" & (1) 5" dia., and (1) lower 4" dia. hood, -- Requires 3,820 CFM;Also included: -- (7) Lasers with mounting rack -- (2) additional arbor and lots of spacers

MEREEN JOHNSON 424 DC Gang Rip SawSpecifications -- 24" Arbor cap., 14" max. dia. tooling, 3-1/2" max., 22" min. length, 6" throat. -- 75 HP - 3,600 RPM TEFC Direct drive motor, arbor with disc brake. -- Feed & chain:3 HP Variable feed speed from 50 to 150 FPM,Equipped with & Features -- Outboard Arbor Bearing -- Automatic chain oiler with low-level shutoff. -- (4) 3" Dia. air-loaded overhead pressure rolls -- Full width spring-loaded overhead bed plate -- Height adjustment with scale & pointer reference -- POSI-FEED Style Dip Chain w/ Non-Marring Rubber Insert Slats -- Anti-kickback finger system with (1) lower & (2) upper on infeed. -- Amp-Meter for Main Motor -- Includes a Sleeve and Spacers Set (2) Upper dust hoods, (1) 10" & (1) 5" dia. & (1) lower 4" dia. hood -- Requires 3,820 CFM

2024 Unused Mereen-Johnson Model 424-DC Straight Line Multiple Rip SawSpecifications --Capacity: Arbor space 24" -- Thickness to 3-1/2" using 14" diameter tooling -- 30" Minimum length glue joint accuracy -- 6" ThroatEquipped with & Features -- Feed Bed: Mereen-Johnson exclusive POSI-FEED dip bed carried on precision machined and hardened -- 5" pitch DOUBLE-VEE chain, Contoured hardened dip cams -- Hold Downs and Bed Plate: Four 3" diameter air loaded overhead idle press rolls -- Full width segmented maple overhead spring loaded bed plate -- Powered vertical adjust of press rolls and bed plate for unit vertical adjust through up/down push button controls, manual Hand-wheel adjust with scale and pointer thickness reference -- Saw Sleeve: Three 24" capacity sleeve, arranged for 3-1/8" bore, 14" maximum dia. tooling -- Saw Spacers: Three sets of saw spacers included, 24" total length -- Dust Collection: Two upper dust hoods: One 10" dia, One 5" dia, One Lower 5" dia.dust hood (Requires total 4,060 CFM at 5,000 FPM velocity with 4" water gauge at hood opening) -- Anti-Kickback Assemblies: Single bottom and double upper infeed, and single upper outfeed -- Sound Enclosure: Machine mounted fiberglass sound enclosure -- Press roll and motor enclosure hinged for machine access -- Press roll enclosure with gas cylinder lift assist

The seller has confirmed that this Mereen Johnson 441 Rip saw is in great working/running cnodition and it is ready to load! - 2004 Cameron Auto Opti-Rip Infeed - Model: 34F-M1 - Serial: OR164 - 100% Servo (only Servo is this Cameron) - Full amp load 81 - 44" W bed - Up to 20 saws can be run on the arbor - No moving blades BUT there are moving lasers Although this one has been pulled from service, they have an identical one still running and available for inspection....

Mereen Johnson 424 Gang Rip Saw

Mereen-Johnson Model 441-DC Gang Rip Saw Capacity: Arbor space 41” Arbor Drive: 75 HP 3600 RPM TEFC motor Feed Drive: HP TEFC variable speed direct; 45’ to 225’ feet per minute Hold Downs & Bed Plate: Four 5” dia. Air loaded high yield idle press rolls Saw Sleeve: One 41” capacity sleeve Dust Collection: Four upper dust pick-ups: two (2) 8” dia., two(2) 4” dia., one lower 4”dia. Pick-up:(requires total 4820 CFM @ 5,000 feet per minute) Swing Arm & Tip-Up Cart: One floor mounted dual shaft swing arm and one tip-up saw sleeve set-up cart Electrical: Arranged for 3 phase, 60 cycle, 460V Cameron Automated Opti-Rip Model #34F-M1 System: Manufacture Year: (2004) Complete with length measurement Tally System 5 infeed belt and chains for feeding a Gang Rip saw up to 41” wide 16 width sensors 3 sets of pinch rolls for short stock 1 fixed & 4 movable laser lights This system feed for 4’ to 16’ max lumber length It feeds from operator right to left Wired 220V; If 440V required, a transformer will be needed

Montgomery Mdl 34 Top Feed Hog

2022 Morgan Double Head Notcher | Unscrambler and Infeed | Excellent Condition

Morgan In Line Deduster

Morgan In Line Deduster S/N 061495037

Morgan 6' Pallet stacker

Morgan deduster, 6" wide capacity, electric drive, excellent condition

Morgan single head resaw, has return belt, electric drive, good working condition

01-353 | BPQ-0 | 480v

Morgan 5 Head Cant Trim Saw | Recently Refurbished | Includes Infeed System and Waste Belt | Hydraulic / Electric Operating System | 10hp Motors | Adjustable Heads | Max 16ft Length

Rebuilt 2020 | 480V | 3 Phase

N&A Air pop up trim saw

Newman Chamfering Machine