Equipment For Sale

DIEHL SL-52W Straight Line Rip Saw (Wide Arm Model);15 HP main saw motor, 2" arbor.The chain on this SL-52 WA has 90% + chain life or better left. Just look at the pictures! This is a glue line capable machine.Specifications: --The table measures 95″ X 79″ and the fence will lock 53″ to the right of the blade with 56 total inches of clearance from the right of the blade to the upright supports --4-1/4" Max. depth of cut; -- Stock thickness cap. 1/8" min. to 4-1/4" maximum. -- Everything raises and lowers throughout it’s range very easilyFeed: -- 2 HP Variable speed feed 65 to 195 FPM. -- Automatic lubrication system. -- Automatic chain oiler.Equipped with & Features: -- Spring loaded rip fence. -- Anti-splinter kickback fingers. --Front push button controls -- Laser light

DIEHL 55 Straight Line Ripsaw:Specifications -- 15HP - 3,450 RPM Direct drive arbor motor, -- 2" dia. arbor, 18" blade cap., 4" max. depth of cut, -- 12" min. part length, -- 21-1/2" width of table to the right of blade & 30" to the left, 43" table length. -- 2 HP 4-Step feed drive 30 - 50 - 75 & 120 FPM; twin chain drive,Equipped with & Features -- Automatic dip lubrication. -- Top pressure system with (6) full width rollers & (2) split rollers over blade. -- All cast iron machine -- Runs very nice --Complete with: Rip fence,.

DIEHL - TFM-68, ...4"; x 8"; 5-Head High Speed Jointed Moulder5-Head (B-R-L-R-T-B) with 8-5/8" x 4-1/2" capacity. Head sequence: Bottom 15 HP, Right 10 HP, Left 10 HP, Right 10 HP, Top 15 HP, and Bottom 20 HP motor.1st Bottom and 1st right side run at 3,600 RPM; all the other spindles run at 6,000 RPM utilizing the included Frequency Changer.Side heads tilt 35° inward and 5° outward. Specifications: -- Spindle diameter: Vertical 1-13/16"; Horizontal 2-1/8" dia. for top spindle only. -- Built-in straight & profile jointers on spindles 2 - 3 - 4 & 5. -- Variable feed speed from 20 - 150 FPM via 15 HP feed drive. -- Cardan Shaft driven. -- WAXLIT Pump and groove bed with groove cutters for 1st bottom. -- Air chipbreakers and feed roll tensioning. -- Starting panel and transformer included.Weight: Approx. 14,000 Lbs

DIEHL SL-55 Straight Line RipsawSpecifications: -- 15 HP - 3,450 RPM Direct drive arbor motor, 2" dia. arbor, 16" blade cap. -- 4" Max. depth of cut, 12" min. part length -- 20-1/2" width of the table to the right of blade & 30" to the left, 66" table length.Equipped with & Features: -- 3 HP 4-Step feed drive 30 - 50 - 75 & 120 FPM; -- Twin chain drive. -- Automatic drip chain lubrication. -- Top pressure system with (6) full-width rollers & (2) split rollers over the blade.

DIEHL - SL 50, ...Straight Line Rip SawSpecifications: -- 15 HP - 3,450 RPM Direct drive arbor motor, 2" dia. arbor. -- 16" Blade cap., 2-1/2" max. depth of cut. -- 10" Min. part length. -- 49" Width of table to the right of blade & 26-5/16" to the left. -- 57" x 79" Tabletop size. -- 2 HP Feed drive, feed speed of 65 - 195 FPM.Equipped with & Features: -- Twin chain drive. -- Automatic dip lubrication. -- Top pressure system with: (6) Full width rollers & (2) split rollers over blade. -- Rip fence. -- Push buttons and magnetic starters. -- Floating rip fence. -- Self-adjusting antikickback fingers. -- Full overload & undervoltage protection.

--In auction: https://exfactoryauctions.com/Detail/SO-230040/event/A122024$1- NO RESERVE!-- GRECON/DIMTER OPTICUT 204 L Optimizing Cutoff System NOTE: Currently De-installed Specifications: For hard or soft wood. Left-to-right feed. Max. crosscut section 7-3/4" x 1-15/16" to 5-3/4" x 3-1/16". Board width cap. 1-1/5" to 7-3/4", Board thickness 3/8" - 3-1/8", Board length 15" to 20'. Shortest fixed length 5-3/8", Shortest finger jointing length 5". Max. feed speed 750 FPM. Average production rate 36,000' running length/shift. Equipped with: Blade dia. 19-1/2", with 10 HP - 4,100 RPM Motor. 10 HP Servo drive feed motor, (3) Pneumatically-operated top rollers & (1) Driven bottom drum roller. Control, with LCD display & Touchpad. Complete with: 12" W x 23-1/2' L Infeed Belt Conveyor, with Double wheel measuring system & Top mounted luminescent camera, Detects crayon defect marks up to (8) grades. 12" W x 34-1/2' L Outfeed Belt Conveyor, with (4) Sorting stations, with Encoder pulse-controlled kickers, Kick singularly or in batches of 2 or 3 for larger heavier boards. PC-Based Control.

This is a 2019 saw that was deliver new in 2020. Everything is in good working condition and ready to ship. 18’ length of infeed 14’ max board length 35’ outfeed Includes: One kicker. More can be added. 480v 30 Amps

2001 Grecon Dimter OptiCut Model 200-4R S/N 0667.10

DISA CS-4 MAXI Dust collector with Rotary Air Lock. Approx. 16,000 CFM at 8.7:1 air-to-cloth ratio; 1,725 sq. ft. of filter area, with (128) filter bags filtering to 3-micron. -- General Info: CS-4-M consists of (3) filter modules & one entrance module. -- Comes with: DISA, S56-500 Material Handling fan powered by 50 HP TEFC motor. Fan nominal rating: 16,000 CFM @ 9" SP. Fan is currently mounted on elevated support but can be installed on the ground as well. -- (3) Reverse air bag cleaning modules with motorized fans that clean the bags every (4) hours of operation automatically, each with 2 HP fan motor. A damper at inlet closes during cleaning cycle to prevent blowback. -- Complete with: Hopper bottom as collected dust is conveyed to one end where a NRS-20 Rotary Air Lock where dust is discharged into Transfer fan. Filtered air return unit, 8' support structure to allow for dumpster under Dust Collector. -- Includes: Control panel, motor starters and switches, and Explosion Panels. Material handling main fan w/motor mounted to side of base module. -- 26" diameter inlet pipe, 97" clearance under collector for dump hopper, free standing steel bolt-together structure, -- Features: Dust transfer from bottom of Rotary Air Lock to enclosed container by separate floor mounted material handling fan, approx 7.5 HP. -- Note: Pictured storage bins are not included.

2023 Ditch Witch JT24A Drill -420 hours -Have over 600 feet of HDX drill steel -FM13XB Mixing System -500-gal tank -Marksman Locator -Commander 7A -Trihawk Bits -2-yr Extended Warranty Ready to work like NEW MORE PICTURES COMING SOON!!!!!!

This system was running daily before hte facility shut down 4-years ago. Buyer will need to provide rigging. (240) 4" x 12' Bags 100 HP Main Motor Bags are cleaned by compressed air approx every minute System is approx 1998 Approx 35000-38000 CFM

DMC Unisand 2000 43" Wide Belt Sander Includes: Murphy Rogers Dust Dust Collector

12" x 16" Flats? 15" Round?Band Wheels: 16" Diameter?Blade Size:1.5" x 162" x .035"? Work Height:30"? Blade Speeds Approx.: 40 - 450 FPM

2017 Dodge Ram 4500 Service Truck One owner 4x4 dually Cummins Crew cab 150k miles Road ready PRICE REDUCED

2013 DODGE 5500 4X4 6.7 CUMMINS TURBO DIESEL AUTOMATIC 9' DUMP BOX FULL POWER NO POWER SEAT A/C LOW MILES

Used DODGE TDT26 shaft mounted gear reducer; 25.66:1 ratio, input shaft diameter 2 3/8", bore 5", S/N 1645. Offered as-is where-is. (INV.G-18) Price $2,255.00.

DODGE gear reducer: 194:1 ratio; 10 HP. Price $900.00. As-is/where-is. (Inv. # G-11).

DODGE gear reducer: 195:1 ratio; 3 HP. Price $850.00. As-is/where-is. (Inv. # G-3).

DODGE gear reducer: 16:1 ratio; 26 HP. Price $600.00. As-is/where-is. (Inv. # G-2).

Reliance / Dodge gear reducer, 100 RPM output, 5HP Reliance motor: 230/460V, RPM 1700, SF:1.00, INS. CL:F, Reliance ID# B77Y9718P, Hz:60, Dodge# size:5-147P-DG4A-2-17.1-A1, Four are available, Several other types and sizes are available, Videos are available: https://youtube.com/shorts/tpY0HEaslLI