Radial Arm Saws For Sale

Radial Arm Saws 

Band Mills (Wide) (45) Band Mills (Thin Kerf) (20) Debarkers (73) Edger-Boards (54) Forklifts (83) Gang Saws (46) Hogs and Wood Grinders (214) Portable Sawmills (7) Resaws-Band (151) Scragg Mills (25) Trim Saws (72) Unscramblers (44) Wheel Loaders (135) Wood Chippers - Stationary (108)
Air Compressors (129) Airlocks (20) Band Choppers (1) Banding-Strapping Machines (85) Blowers and Fans (104) Boilers (11) Carriages (Sawmill) (25) Carriage Drives (Sawmill) (45) Chip Bins (22) Chip Cyclones (14) Chip Screens (30) Chop Saws (39) Circular Saw Husks (6) Circular Sawmills (64) Converyors-Lug Loader (1) Conveyors (57) Conveyors Board Dealing (98) Conveyors Deck (Log Lumber) (222) Conveyors General (26) Conveyors-Auger (8) Conveyors-Live Floor (8) Conveyors-Run-Around (3) Conveyors-Vibrating (55) Conveyors Belts (200) Conveyors-Barn Sweep (27) Conveyors-Live Roll (125) Dip Tanks (9) Drum Dryers (11) Dry Kilns (21) Dump Hoppers (11) Dust Collection Systems (250) Edger Tailing Devices (7) Edgers-Gang (43) Edgers-Slab (4) Edgers-Vertical (2) Electrical (138) Gang Rip Saws (67) GenSets (32) Hammer Mills (2) Hydraulic Power Packs (66) Knife Grinders (33) Knucklebooms-Stationary (2) Laser Lights (4) Log Home Machinery (7) Log Irrigation (1) Log Merchandising Systems (9) Log Turners (Sawmill) (33) Lumber Stackers (26) Lumber Stickers (2) Mat Equipment (3) Metal Detectors (26) Misc (102) Operator Cabs (16) Package Saws (2) Parts and Parts Machines (2) Post and Pole Peelers (23) Power Units-Engines (8) Radial Arm Saws (24) Scanning Systems (1) Scissor Lifts (50) Screening Systems (2) Setworks - Sawmill (4) Shapers (1) Sharpening Equipment (99) Shavings Baggers (2) Shavings Mills (16) Slab Saws (2) Stake Pointers (1) Tie Processings (3) Wrap and Packaging (4)

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 2
24 Results Found
Sort By 
STANDARD LISTINGS
2021 Cam-Wood RS-640  Radial Arm Saw
$3,475

CAM-WOOD RS-640 Radial Arm Saw: Sturdy cast iron frame for saw head and arm.Specifications: -- 4 HP motor; 4/18" cutting depth with 14" dia. blade; 43" max. trimming width x 24" max. crosscut. Equipped with: -- Laser Light, magnetic starter and overload protection. -- Positive locking device for tilting. -- Saw head that glides on ball-bearings against a hardened steel surface; spring-loaded saw head return. -- Large 44" x 33-3/4" wooden table. -- Heavy gauge steel base and legs for solid support. Features: -- 0° - 180° Saw head rotation (horizontal); 0 - 90° head tilting (vertical), with positive locks on rotating head. -- Includes: Upper & lower blade guards and anti-kickback attachment.

Jim Reedy
800-374-5009 ext:455
Call

2021 Cam-Wood RS-660  Radial Arm Saw
$4,475

CAM-WOOD RS-660 Radial Arm SawSturdy cast iron frame for saw head and arm.Specifications: -- 4 HP Motor; 4-1/8" cutting depth with 16" dia. blade; 45" max. trimming width x 35" max. crosscut. -- Large 32" x 45" wooden table. -- Magnetic starter and overload protection. -- 0° - 180° Saw head rotation with positive locks on rotating head. Features & Equipped with: -- Saw head that glides on ball-bearings against a hardened steel surface. -- Heavy gauge steel base & legs for solid support. -- Positive locking device for tilting. -- Motor brake, upper & lower blade guards, and anti-kickback attachment.

Jim Reedy
800-374-5009 ext:455
Call

Coe Slide Table  Radial Arm Saw

COE Radial Arm Saw with Sliding Table

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Delta 33-411  Radial Arm Saw
$2,450

BLACK & DECKER DELTA 16" Radial Arm SawEquipped with: -- 5 HP motor with electo-mechanical blade brake; 16" dia. saw blade cap.; -- 1" Aarbor; approx. 29" crosscut capacity on 1" thick material with a max. depth of cut at 4-3/4". Complete with: -- 16" Blade guard with anti-kickback attachment; retractable leaf guard; -- Cutterhead return attachment; adjustable crooscut stops, and steel legs for strong durability. Actual model is BLACK & DECKER DELTA 16" - Specifications from DELTA 33-411.

Jim Reedy
800-374-5009 ext:455
Call

Dewalt 35 SERIES  Radial Arm Saw
$7,450

DEWALT 35 Series GE 20" Radial Arm Saw 7.5 HP TEFC Saw motor; 20" dia. blade; -- Specifications: 1" x 3-1/8" saw arbor; 6" thickness cap. @ 90°, 31" crosscut cap.; 21-5/8" max. miter cut @ 45°; 40" rip cap. -- Complete with: Blade guard, magnetic starter, stand, carriage return mechanism. -- Optional: Electric brake. -- Photo not of actual machine.

Jim Reedy
800-374-5009 ext:455
Call

Dewalt R-1450  Radial Arm Saw
$550

DEWALT/BLACK & DECKER R 1450 Type B 10" Radial Arm SawSpecifications: -- Blade diameter 10", Table size 27" x 30" x 36" H. -- Rip capacity: 8" In, 17" Out.Equipped with: -- 3,450 RPM Motor, 35026 Automatic return device. -- Mounted on 25" x 120" x 33" Wood cabinet.Dimensions: 120" x 34" x 60" HWeight: 350 Lbs.

Jim Reedy
800-374-5009 ext:455
Call

Dewalt  Radial Arm Saw

Dewalt Radial Arm Saw

Carolina Machinery Sales, Inc
704-288-1904
Call

2007 OMGA RADIAL 1100-7  Radial Arm Saw
$8,950

OMGA 1100-7 Radial Arm SawSpecifications: -- 7 HP Saw motor, 42.3/4" crosscut cap. at 90°; 30-5/8" at 45°; 6-7/8" thickness cap. at 90°, 4-7/8" at 45°; 52" rip cap.; 20" dia. blade with 1" bore; 2" max. dado cap.; 3,400 RPM Arbor Speed. -- Features: -- Solid saw carriage with replaceable tempered steel sliding tracks; carriage travels on (8) bearings with dust scrapers for smooth travel & extended track life; 180° Swivel of entire saw carriage for mitered crosscuts; 45° Saw head tilt for compound miter cuts. -- Complete with: -- Spring loaded return for safe return of saw head after completion of the cut; 58" x 44" replaceable wooden tabletop with full length back fence; fabricated open steel base; electromagnetic brake to stop the blade within (2) Seconds. -- Includes: -- Magnetic controls, push button controls & thermal overload switch. -- OPTIONAL EQUIPMENT WHEN ORDERED WITH MACHINE: -- Automatic Air-Over-Oil Head Feed System, foot pedal activated, add $4,379.00 -- Vertical Pneumatic Clamp, add $ 675 -- Horizontal Pneumatic Clamp, add $929 -- RH or LH Roller Table, 6'-7" X 24", add $1,687 -- 3' Aluminum Fence Extension, add $410 -- 6' Aluminum Fence Extension, add $580

Jim Reedy
800-374-5009 ext:455
Call

2021 OMGA RADIAL 1250-7  Radial Arm Saw
$12,753

OMGA Radial 1250-7 Radial Arm Saw -- Specifications: 7 HP Saw motor, 43.897" crosscut cap. at 90°; 6-7/8" thickness cap. at 90°, 4-7/8" at 45°; 59" rip cap.; 20" dia. blade with 1" bore; 1-3/4" max. dado cap.; 3,400 RPM Arbor Speed. -- Features: Solid saw carriage with replaceable tempered steel sliding tracks. -- Carriage travels on (8) bearings with dust scrapers for smooth travel & extended track life. -- 180° Swivel of entire saw carriage for mitered crosscuts. -- 45° Saw head tilt for compound miter cuts. -- Complete with: Spring loaded return for safe return of saw head after completion of the cut; 58" x 44" replaceable wooden tabletop with full length back fence; fabricated open steel base; electromagnetic brake to stop the blade within (2) Seconds. -- Includes: Magnetic controls, push button controls & thermal overload switch. -- OPTIONAL EQUIPMENT WHEN ORDERED WITH MACHINE: -- Automatic Air-Over-Oil Head Feed System, foot pedal activated, add $4,379.00 -- Vertical Pneumatic Clamp, add $ 675 -- Horizontal Pneumatic Clamp, add $929 -- RH or LH Roller Table, 6'-7" X 24", add $1,687 -- 3' Aluminum Fence Extension, add $410 -- 6' Aluminum Fence Extension, add $580

Jim Reedy
800-374-5009 ext:455
Call

2021 OMGA RADIAL 600 P3S  Radial Arm Saw
$7,370

OMGA RADIAL 600 P3S Radial Arm Saw; Solid saw carriage with replaceable tempered steel sliding tracks. -- Carriage travels on (8) bearings with dust scrapers for smooth travel & extended track life. -- 180° Swivel of entire saw carriage for mitered crosscuts. -- 45° Saw head tilt for compound miter cuts. -- Spring loaded return for safe return of saw head after completion of the cut. -- Oversized replaceable wooden tabletop with full length back fence. -- Fabricated open steel base. -- Electromagnetic brake to stop the blade within (2) Seconds. -- Magnetic controls, push button controls & thermal overload switch. -- Options: Single-phase motor, Blade, Dado head guard, Dust collection system, and Roller tables for infeed & outfeed.

Jim Reedy
800-374-5009 ext:455
Call

2021 OMGA RADIAL 900-7  Radial Arm Saw
$10,833

OMGA RADIAL ARM SAW 900-7 -- Specifications: -- 7 HP Saw motor, 35-1/2" crosscut cap. at 90°; 24-15/16" @ 45°; 5-7/8" max. thickness cap. at 90°, 4-3/16" at 45°; 43-5/16" rip cap.; 18" dia. blade with 1" bore; 2" max. dado cap.; 3,400 RPM arbor speed. -- Features: -- Solid saw carriage with replaceable tempered steel sliding tracks; carriages that travel on (8) bearings with dust scrapers for smooth travel & extended track life; 180° swivel of entire saw carriage for mitered crosscuts; 45° saw head tilt for compound miter cuts. -- Complete with: -- Spring loaded return for safe return of saw head after completion of the cut; oversized replaceable wooden tabletop with full length back fence; fabricated open steel base; electro-magnetic brake to stop the blade within (2) seconds. -- Includes: -- Magnetic controls, push button controls & thermal overload switch. -- Options: Blade, Dado head guard, Dust collection system, & roller tables for infeed & outfeed.

Jim Reedy
800-374-5009 ext:455
Call

1998 OMGA RADIAL 900-7  Radial Arm Saw
$4,950

OMGA 900/7 FM RADIAL ARM SAW Specifications: -- 7 HP Saw motor, 35-1/2" crosscut cap. at 90°; 24-15/16" @ 45°; 5-7/8" max. thickness cap. at 90°, 4-3/16" at 45°; 43-5/16" rip cap.; 18" dia. blade with 1" bore; 2" max. dado cap.; 3,400 RPM arbor speed. -- Features: -- Solid saw carriage with replaceable tempered steel sliding tracks; carriages that travel on (8) bearings with dust scrapers for smooth travel & extended track life; 180° swivel of entire saw carriage for mitered crosscuts; 45° saw head tilt for compound miter cuts. -- Complete with: -- Spring loaded return for safe return of saw head after completion of the cut; oversized replaceable wooden tabletop with full length back fence; fabricated open steel base; electro-magnetic brake to stop the blade within (2) seconds. -- Includes: -- Magnetic controls, push button controls & thermal overload switch.

Jim Reedy
800-374-5009 ext:455
Call

2021 OMGA RN-450  Radial Arm Saw
$4,913

OMGA Series RN Model 450 Solid saw carriage with replaceable tempered steel sliding tracks. -- Carriage that travels on (8) bearings with dust scrapers for smooth travel & extended track life. -- 180° Swivel of entire saw carriage for making mitered crosscuts. -- 45° Saw head tilt for compound miter cuts. -- Spring loaded return for safe return of saw head after completion of the cut. -- Oversized replaceable wooden table top with full length back fence. -- Fabricated open steel base. -- Electro-magnetic brake to stop the blade within (2) seconds. -- Magnetic controls, push button controls & thermal overload switch. -- Options: Single phase motor, Blade, Dado head guard, Dust collection system, and Roller tables for infeed & outfeed. -- For single phase 2 HP motor please add ...$115.

Jim Reedy
800-374-5009 ext:455
Call

2021 OMGA RN-700  Radial Arm Saw
$5,424

OMGA RN-700 RADIAL ARM SAW Specifications & features: 5 HP, 27-1/2" Crosscut cap. @ 90°; 19-7/16" @ 45°. -- Solid saw carriage with replaceable tempered steel sliding tracks. -- Carriage travels on (8) bearings with dust scrapers for smooth travel & extended track life. -- Self-centering locking in the main angles positions in (3) places, the saw arm (1), the motor & blade assembly swivel (2) and the motor carriage tilt (3); additionally manual locking at all intermediate angles. -- Easy and extremely practical unlocking of the arm for left/right swing on the front of the beam. -- Swiveling of the saw blade assembly and tilting of the blade on the vertical and horizontal axes. -- Standard overload protection with no-volt coil and motor brake. -- Spring loaded return for safe return of saw head after completion of the cut. -- Oversized replaceable wooden table top with full length back fence. -- Fabricated open steel base. -- Magnetic controls, push button controls & thermal overload switch. -- Options: Single-phase motors, Blade, Dado head guard, Dust collection system, & Roller tables for infeed & outfeed.

Jim Reedy
800-374-5009 ext:455
Call

2021 OMGA RN-900  Radial Arm Saw
$5,700

OMGA RADIAL ARM SAW MODEL 900 Series RN Solid saw carriage with replaceable tempered steel sliding tracks. -- Carriage travels on (8) bearings with dust scrapers for smooth travel & extended track life. -- 180° Swivel of entire saw carriage for making mitered crosscuts. -- 45° Saw head tilt for compound miter cuts. -- Spring loaded return for safe return of saw head after completion of the cut. -- Oversized replaceable wooden tabletop with full length back fence. -- Fabricated open steel base. -- Electromagnetic brake to stop the blade within (2) Sec. -- Magnetic controls, push button controls & thermal overload switch. -- Options: Single-phase motor, Blade, Dado head guard, Dust collection system, and Roller tables for infeed & outfeed.

Jim Reedy
800-374-5009 ext:455
Call

2021 Original 3512-03  Radial Arm Saw
$4,943

ORIGINAL 3512-03 RADIAL ARM SAW (Contractor Series)The Contractor Duty Series is an industrial rated machine that has the versatility to crosscut, bevel cut, miter cut, and swivel to a rip position to cut down panels precisely and accurately. These machines are well suited for cutting off up to 3” material, as well as cutting off 24” wide panels for squaring shelving and doors and other similar applications. -- Specifications: 3 HP TEFC Saw motor; 12" dia. blade; 1" x 2-3/16" saw arbor; 3-1/16" thickness cap. @ 90°, 1-1/4" @ 45°; 24-1/4" crosscut cap. with 1" stock; 21-1/4" with 3" stock; 16" max. miter cut @ 45° with 1" stock; 34-15/16" rip cap. -- Features: Swivel arm for miter cuts, swivel motor for bevel cuts; indexing yoke to 90° for rip cutting panels; saw head with automatic motor brake and automatic spring return; positive locking device for tilting; upper and lower blade guards with anti-kickback attachment. -- Complete with: 34" x 26" MDF table; sturdy powder coated cast iron frame; heavy gauge steel base and support legs. -- Optional: 12" x 36 or 60-Tooth x 1" Bore saw blade; OS Series manually adjustable measuring systems; OS Series material handling roller and flat tables; dust collection hoods; key access limiting switch and emergency stop switch.

Jim Reedy
800-374-5009 ext:455
Call

1988 Original 3536-03  Radial Arm Saw
$4,295

ORIGINAL 3536 RADIAL ARM SAW (Heavy Duty Series)The Heavy Duty Series is a very precise machine made for the rigors of every day industrial use. Straight, miter, bevel and compound bevel cutting in a heavy gauge steel powder coated frame & legs. Specifications: -- 3 HP TEFC 1-Phase saw motor; 14" dia. blade; 1" saw arbor; 4-1/8" thickness cap. @ 90°, 1-3/4" @ 45°; 24" crosscut cap.; 15-1/2" max. miter cut @ 45°. -- Features: -- Swivel arm for miter cuts, swivel motor for bevel cuts; indexing yoke to 90° for rip cutting panels; saw head with automatic motor brake and automatic spring return; positive locking device for tilting; upper and lower blade guards with anti-kickback attachment. -- Complete with: -- 42-1/2" x 31-1/4" MDF table; sturdy powder coated cast iron frame; heavy gauge steel base and support legs.

Jim Reedy
800-374-5009 ext:455
Call

2021 Original 3546  Radial Arm Saw
$7,433

ORIGINAL 3546 RADIAL ARM SAW (Heavy Duty Series)The Heavy Duty Series is a very precise machine made for the rigors of every day industrial use. Straight, miter, bevel and compound bevel cutting in a heavy gauge steel powder coated frame & legs. -- Specifications: 5 HP TEFC Saw motor; 16" dia. blade; 1" x 2-3/16" saw arbor; 4-15/16" thickness cap. @ 90°, 2" @ 45°; 24" crosscut cap.; 15-1/2" max. miter cut @ 45°; 37-7/8" rip cap. -- Features: Swivel arm for miter cuts, swivel motor for bevel cuts; indexing yoke to 90° for rip cutting panels; saw head with automatic motor brake and automatic spring return; positive locking device for tilting; upper and lower blade guards with anti-kickback attachment. -- Complete with: 42-1/2" x 31-1/4" MDF table; sturdy powder coated cast iron frame; heavy gauge steel base and support legs. -- Optional: 16" x 60-Tooth x 1" Bore saw blade; pneumatic clamping systems; power carriage feed; 14" & 22" wide roller tables.

Jim Reedy
800-374-5009 ext:455
Call

2021 Original 3558  Radial Arm Saw
$10,675

ORIGINAL 3558 RADIAL ARM SAW (Super Duty Series)The Super Duty Series is the ultimate workhorse of the industry, capable of operating 2 to 3 shifts per day. Miter & bevel cutting, compound miters and dado operations. Constructed of heavy duty cast and ductile iron for vibration free operation. -- Specifications: 7.5 HP TEFC Saw motor; 20" dia. blade; 1" x 3-1/8" saw arbor; 6-1/4" thickness cap. @ 90°, 3-1/4" @ 45°; 32" crosscut cap.; 21-5/8" max. miter cut @ 45°; 48-3/4" rip cap. -- Features: Swivel arm for miter cuts, swivel motor for bevel cuts; indexing yoke to 90° for rip cutting panels; saw head with automatic motor brake and automatic spring return; positive locking device for tilting; upper and lower blade guards with anti-kickback attachment. -- Complete with: 58" x 50" MDF table; sturdy powder coated cast iron frame; heavy gauge steel base and support legs. -- Optional: 20" x 60-Tooth x 1" Bore saw blade; pneumatic clamping systems; power carriage feed; 14" & 22" wide roller tables.

Jim Reedy
800-374-5009 ext:455
Call

2004 Original 3579-16L  Radial Arm Saw
$12,900

ORIGINAL 3579-16L Metal Cutting Radial Arm Saw (Super Duty Series)The Super Duty Series is the ultimate workhorse of the industry, capable of operating 2 to 3 shifts per day. Miter & bevel cutting, compound miters and dado operations. Constructed of heavy duty cast and ductile iron for vibration free operation. -- Specifications: -- 7.5 HP TEFC Saw motor; 16" dia. blade; 1" x 3-1/8" saw arbor; 5" thickness cap. @ 90°, 2" @ 45° bevel; 32" crosscut cap.; 21-5/8" max. miter cut @ 45°. -- Features: -- Swivel arm for miter cuts, swivel motor for bevel cuts; indexing yoke to 90° for rip cutting panels; saw head with automatic motor brake and manual chain feed assembly; positive locking device for tilting; upper and lower blade guards with anti-kickback attachment. -- Complete with: -- The Metal Cutting Series comes with the standard t-slot aluminum extruded top, allowing easy to attach aluminum fence, clamping systems, table surface options, as well as your own clamping jigs or cutting fixtures. These all come mounted to a extruded leveling frame for easy leveling of the entire table assembly throughout the life of the machine. -- Includes: -- Optional power feed saw head; pneumatic table clamping system

Jim Reedy
800-374-5009 ext:455
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved