Sawmill Equipment For Sale

Baker model a bandsaw with return conveyor

Baker complete run-around system for grade resaw, electric powered, includes cab and all controls, good working condition

Baker C Resaw with Return. Located in NY. #C929

2018 Baker Model C 4 Head Resaw Well maintained Work ready Only selling to go to a smaller unit SN 18-4895

Baker Furnace Dry Kiln 110volt 3 phase Excellent condition

1992 Baker 6 Head Resaw Six-Head "C" Saw 1 needs a spindle and wheel replacement. Approximately 8,320 Hours Serial Number 92-379 6 Motors (30) HP (37) Amps Mechanical Drive

Baker Furnace Dry Kiln 110volt 3 phase Excellent condition

Large Sawmill Operation For Sale Located In East Texas in the Piney Woods, one of the densest forests in America, Custom Cut Lumber has been doubling its production every year for the past seven years last year we cut about 7 million board feet. The potentials are still yet much higher than that. Our crew varies from 35 to 50 men, depending on the season, and in the event of sale, most of these men would want to continue working on site for the new owner. We have developed into a number of niche markets that have served us well and the equipment here on the facility is equipped to produce a wide variety of products. One of the keys of our own success has been our diversified production. We have been able to shift production to supply different markets when the prices best served us. We cut for a variety of industrial applications: matt timbers, railroad ties, pallet material, dunnage, and a number of other products. We have built long term ongoing relationships with about 20 companies and hundreds of other individuals for whom we regularly cut orders. Our accounts receivable consistently receives payment from our customers over 33% faster than the national industrial average for our business type. We receive logs from about 20 local logging operations and companies in the east Texas area and the supply of pine, and mixed hardwoods including red and white oak, sweet gum, elm, ash, etc., is plenteous, along with regular and steady supplies of eastern aromatic red cedar, black walnut, hickory, etc. The mill is equipped with in-ground scales to weigh log trucks and tractor trailers, and an office building. There are 5 primary cut stations, including one with an end-dogging scragg mill with parallel 56” circle saw blades, dual vertical edgers, and a down feed green chain with a 4-head trim saw, a Baker 4-head resaw, and vertical bandsaw for trimming down sidecuts into pallet material. A cant breakdown station is equipped with a 2-head Baker split saw, a 5-head Newman trim saw, a Baker 5-head resaw, a notcher for runners/stringers, and stacking racks and belts for cutting and stacking pallet deck boards and stringers, with accompanying dust collection systems. In addition to the end-dogging Scragg mill, there is another Scragg mill station where we process slabs and smaller logs. There are two Baker 3630E Bandmill's with accompanying chop saws that we use to cut mat timbers, beams, dimensional lumber, slabs, mantles, etc., up to 32’ long and up to 30” wide. We have firewood splitters and stacking facilities as well, and a loading ramp for our woodchip markets. We have two 6,000 BDFT wood-fired kilns, numerous drying sheds, a mechanic’s bay with locking cargo container for valuables. There are two rental houses on the property, presently occupied by rent-paying occupants. There is a 30” Buss planer, a board edging station, two 48” chippers, Our support equipment includes 4 skid steers, 2 front-end loaders, one equipped with a

Model 3650E with Baker (3) Strand Infeed Deck Excellent condition Hydraulic over electric general factory networks. Hooked up to power and ready to be demonstrated.

Baker Dominator 3650E Sawmill Edmiston Edger Morbark Chipper with diesel engine All decks and rollers

Baker Products’ Self-Dumping Steel Hoppers can be used to collect almost anything. It has a reinforced base and continuous weld. When the hopper is full, you can easily pick it up with almost any forklift and dump it simply by pulling a lever. It has a lock, so the load will not dump by mistake. The Baker Self-Dumping Steel Hopper is a convenience every company should have. A. 2 yd (1,828 mm) 603 lbs. (274 kg) B. 2 yds (1,828 mm) 805 lbs. (365 kg) C. 3 yds (2,743 mm) 971 lbs. (440 kg) A. 44” (111.8 cm) 59” (150 cm) 69½” (176.5 cm) B. 45½” (115.6 cm) 57½” (146 cm) 64½” (163.8 cm) C. 55” (139.7 cm) 58” (147.3 cm) 71” (180.3 cm) Forklift Opening: 2½” (6.4 cm) high by 48½” (123.2 cm) wide

Baker Side Transfer Belt - Hydraulic drive, 5 1/2" x 40" side shift belt, 24" x 5', 21" belt.

Baker Single Head Band Resaw With Return

Baker Short Log Circular Tri Scragg Mill

Brand new...never used...still on the original pallet.

Baker PAQ Resaw Good Working Condition

Dry Kilns (cream), Conventional Heating System, 600,000 BTU Propane, single phase, 120V control voltage, 3 phase 208V motor voltage, open volume: 672 cubic feet, max operating temperature: 500F, owners manual included, excellent condition, 2 units available

Baker Furnace Inc Kiln 110V 3 Phase

Baker Furnace Inc Dry Kiln 3 phase 110V

BALEMASTER - 48 X 72, ...Horizontal Closed Door Baler -- Designed for baling of whole or flattened corrugated boxes. -- Large feed opening to accommodate feed of larger material. -- Large 48" x 36" x 72" bale; weighs up to 1,700 pounds. -- Perfect for a Qarehouse application. -- 25 HP Moroe