Pneumafil Dust Collection Systems For Sale

Dust Collection Systems 

Band Mills (Wide) (42) Band Mills (Thin Kerf) (56) Debarkers (80) Edger-Boards (63) Forklifts (44) Gang Saws (54) Hogs and Wood Grinders (247) Log Loaders (1) Portable Sawmills (34) Resaws-Band (165) Scragg Mills (36) Trim Saws (83) Unscramblers (33) Wheel Loaders (93) Wood Chippers - Stationary (143)
Air Compressors (157) Airlocks (24) Banding-Strapping Machines (138) Blowers and Fans (132) Boilers (25) Bolter Saws (1) Carriages (Sawmill) (29) Carriage Drives (Sawmill) (57) Chip Bins (18) Chip Cyclones (22) Chip Screens (40) Chipping Canters (3) Chop Saws (64) Circular Saw Husks (9) Circular Sawmills (80) Conveyors (80) Conveyors Board Dealing (80) Conveyors Deck (Log Lumber) (206) Conveyors General (30) Conveyors-Auger (5) Conveyors-Live Floor (10) Conveyors-Run-Around (4) Conveyors-Vibrating (52) Conveyors Belts (206) Conveyors-Barn Sweep (24) Conveyors-Live Roll (119) Dip Tanks (4) Drum Dryers (20) Dry Kilns (50) Dump Hoppers (8) Dust Collection Systems (262) Edger Tailing Devices (6) Edgers-Gang (46) Edgers-Slab (6) Edgers-Vertical (6) Electrical (159) Fuel Tanks (2) Gang Rip Saws (114) GenSets (29) Hammer Mills (6) Hydraulic Power Packs (95) Knife Grinders (36) Laser Lights (8) Log Home Machinery (14) Log Merchandising Systems (13) Log Turners (Sawmill) (35) Lumber Carts (20) Lumber Sorters (9) Lumber Stackers (28) Lumber Stickers (1) Mat Equipment (2) Metal Detectors (36) Misc (93) Operator Cabs (32) Package Saws (1) Parts and Parts Machines (10) Plywood OSB and Panel Boards (3) Post and Pole Peelers (21) Power Units-Engines (12) Radial Arm Saws (27) Resaws-Circular (2) Scanning Systems (1) Scissor Lifts (54) Screening Systems (10) Setworks - Sawmill (6) Shapers (1) Sharpening Equipment (116) Shavings Mills (23) Slab Saws (13) Stake Pointers (1) Step Feeders (3) Straight Line Rips (2) Tie Processings (1) Tilt Hoists (16) Wrap and Packaging (5)

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 1
10 Results Found
Sort By 
Recently Added Items
Torit 360-IRD-15
$8,950
Torit 360-IRD-15
Grizzly G0562ZP Portable Dust Collector
Call For Price
Grizzly G0562ZP Portable Dust Collector
STANDARD LISTINGS
Call for Price

The seller of this Pneumafil dust collection system has confirmed that it is in great working/running condition and ready to be loaded! - 150HP - Round duct enters the colletor at 48" diameter

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Used but reconditioned Pneumafil Corp. reverse air bag house, sizes range from 12,000 CFM up to approximately 60,000 CFM. Reconditioning includes new paint, new filter bags, rebuilt interior components. Call for pricing.

 Lenoir, NC
Air Systems Mfg of Lenoir Inc
828-757-3500
Call

Call for Price

Pneumafil Baghouse Model 115-816, 8'Bags, 125HP on Blower with 34" inlet and 30' x 35" outlet.

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Pneumafil – New Style 10’ ·· Pneumafil – Old Style 12’, 10’, 8’ ·· Torrit – 8’, 10’, 12’ ·· Carter Day – 10’ or can be cut to less ·· Airlanco – 10’ ·· Mac – 10’ MCF Style ·· Call for Availability

 Lenoir, NC
Air Systems Mfg of Lenoir Inc
828-757-3500
Call

Call for Price

Pneumafil – New Style 10’ ·· Pneumafil – Old Style 12’, 10’, 8’ ·· Torrit – 8’, 10’, 12’ ·· Carter Day – 10’ or can be cut to less ·· Airlanco – 10’ ·· Mac – 10’ MCF Style ·· Call for Availability

 Lenoir, NC
Air Systems Mfg of Lenoir Inc
828-757-3500
Call

Call for Price

Pneumafil MDL 11.6 Dust Collector S/N 13418

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

PNEUMAFIL 13.5-460-8 Reverse Air Dust Collector System;Reverse Air Dust Collector with 42,600CFM at 9 to 1 air cloth ratio, 4,738 square feet of filter area. -- 13-1/2' Dia. round baghouse contains (460) bags - 96" long by 5" dia. filter bags in galvanized cages w/reverse jet bag cleaning. -- Reverse Air from 15 HP blower motor which cycles once a minute over filter bags (rotating plenum covers each row of bags once a minute, reversing the normal air flow direction. -- Reverse Air action back flushes the bags and dislodges wood dust particles collected on the filter media which then fall to the bottom of the 60° funnel hopper for removal), bags are changed via walk-in door.. -- Material handling fan with approx. 48" inlet dia with 150 HP floor mounted motor (covered in a shed); 0.25 HP explosion proof motor for manifold drive. -- Rotary Air Lock, gearmotor driven at the bottom of the hopper feeding and shared horizontal screw type auger (if you want it) with gearmotor drive. -- Features: MOTOTRONICS Soft Start for main motor. FIRETEK Spark Detection System (subject to prior sale with adjacent unit). -- Includes: Explosion doors, sprinkler pipe, interior electrical control panel, support frame, safety ladder, railings, and exterior ductwork.Professional dismantling, rigging, transport and installation is available.NOTE: Unit being sold under this record is pictured on the left side on the first two photos. For the smaller diameter unit on the right side (DIXIE AIR) see record "DO-011266".

Tony Cornacchione
800-374-5009 ext:432
Call

Call for Price

PNEUMAFIL 11.5-312-12 Baghouse with Rotary Air Lock (RAL). 36,000 CFM @ approx. 7.5:1 Air-To-Cloth ratio, (312) 144" long bags, total filter area of approx. 4,820 sq. ft. -- Fan/motor package: KOGER 37" Fan with a 125 HP TEFC motor -- Bag Cleaning: Walk-in "clean air-side" plenum with plenty of clearance for ease of maintenance, rotating plenum arm with 0.33 HP drive motor covers each row of bags once per minute, each bag cleaned with a blast of reverse air provided by approx. 5 HP blower. -- Construction: Heavy Gauge steel with particle deflector to drop heavier dust particles before cleaning by the bags; Heavy Duty inlet section with wear plates. -- Complete with: Explosion doors Service platform with caged access ladder. -- Single cone hopper with large Rotary Air Lock (RAL) gearmotor driven. -- Original overall height is 42.6" from ground based on literature. Overall weight of housing with structure is approx. 21,500 Lbs. -- Price FOR dismantling, loading. and/or transportation by flatbed truck(s) can be quoted upon request. -- NOTE 1: TWO Units are for sale. Filters are the same. This one has 125 HP motor and 2nd has 200 HP motor. listed as DO-011648. -- NOTE 2: Cyclone, pictured on the left, is listed separately. See record DO-011649

Tony Cornacchione
800-374-5009 ext:432
Call

Call for Price

PNEUMAFIL 11.5-312-12 Baghouse with Rotary Air Lock (RAL).36,000 CFM @ approx. 7.5:1 Air-To-Cloth ratio, (312) 144" long bags, total filter area of approx. 4,820 sq. ft. -- Fan/motor package: KOGER 37" Fan with a 200 HP TEFC motor -- Bag Cleaning: Walk-in "clean air-side" plenum with plenty of clearance for ease of maintenance, rotating plenum arm with 0.33 HP drive motor covers each row of bags once per minute, each bag cleaned with a blast of reverse air provided by approx. 5 HP blower. -- Construction: Heavy Gauge steel with particle deflector to drop heavier dust particles before cleaning by the bags; Heavy Duty inlet section with wear plates. -- Complete with: Explosion doors Service platform with caged access ladder. -- Single cone hopper with large Rotary Air Lock (RAL) gearmotor driven. -- Original overall height is 42.6" from ground based on literature. Overall weight of housing with structure is approx. 21,500 Lbs. -- Price FOR dismantling, loading. and/or transportation by flatbed truck(s) can be quoted upon request. -- NOTE 1: TWO Units are for sale. Filters are the same. One has 125 HP motor listed as DO-011647 and this one has 200 HP motor. -- NOTE 2: Cyclone, pictured on the left, is listed separately. See record DO-011649

Tony Cornacchione
800-374-5009 ext:432
Call

Call for Price

Pneumafil Dust Collector Model 135 (13.5-460-8): 150 hp. The round duct enters the collector at 48" Diameter. Dixie Air Dust Collector: Size: 108-12, Type: SPB, 50 HP, Inlet to the motor, circumference is 90".

Carolina Machinery Sales, Inc
704-288-1904
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved