|
Wood Fuel Pellet manufacturing plant equipment with a capacity of approximately (15) tons per hour;Complete with the following major components: --Truck weigh Scale. -- LAIDIG Screw System for material input. -- Rotary Drum Dryer with Biomass Burner, Pneumatic System, Cyclone Separator with Airlock. -- Hammermill. -- High Pressure Blower System. -- (4) BLISS Pellet Mills (pellet press) each with (2) 250 HP Main Drives. -- BLISS Pellet Cooler. -- Baghouse Filter. -- Silo. -- HAMER Model "2080" form, fit, and seal Auto Bagger. -- Bag Palletizer. -- Electrical Controls, MCCs. -- Blade Sharpener.MORE PHOTOS COMING SOON !NOTES: ● Only 8,000 operating hours! ● This system is still in-place but shut down. The Buyer is required to take the system to a new site. Professional rigging and loading is available.
Equipment Location:NORTHWEST
Bill Christoffersen
800-374-5009 ext:365
|
|
2013 Bliss Pellet Bin w/Level Screws, Feeders, (7) Discharge Augers & Level Sensors
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
|
|
BLISS CounterFlow Pellet Cooler with the following features: -- Rated for 5 to 7 TPH. -- Includes Cooler, Cooler Drive, Control Panel, and Fan. -- NOTES: ● No cyclone or Airlock. ● Only one left available.
Equipment Location:MIDWEST, AL
EX-FACTORY INC.
704-841-2001
|
|
New, Never Used or Installed, CME 14-Ft. Bucket Elevator with the following features: -- Galvanized better life than mere paint coating. -- 1 HP Drive Motor.STANDARD SPECIFICATIONS:Unit Head: ● Explosion vent standard ● Crowned drum-style pulleys with SCOF vulcanized lagging or removable slide lagging ● Heavy-duty double tapered pillow block bearings on turned, ground and polished shaft. Dust seals and bearing supports are included. ● Shaft mount torque arm speed reducers with taper lock bushings are standard.Unit Trunk: ● Heavy Duty jig/robot continuous seam welded trunking ● Angle iron tie braces at 8' intervals ● Reinforced inspection sections with removable covers provide convenient inspection & service of belts/cupsUnit Boot: ● Heavy duty upside/downside hoppers with dual cleanout slides ● Self cleaning wing style boot pulleys ride on heavy duty shafts -- Made in USA.
Equipment Location:NORTHEAST, AL
EX-FACTORY INC.
704-841-2001
|
|
Cubing Plant Equipment for manufacturing animal feed built around COOPER cubing equipment: Complete with the following features and components: -- COOPER Model "98-500" Cuber with 250 HP Main Drive. -- SUPREME "600" Mixer Grinder with 75 HP Main Drive. -- Operator Controls (a simple panel).AUTOMATED BAGGING EQUIPMENT: ● DOBOY A95A Sewing Machine complete. ● HOWE RICHARDSON SCALE SYSTEM MODEL E58. ● BEMIS 7206 BAG FORMER. ● ENGLETT BAG HANGER. ● 15 Ft. Conveyor with Drive.The bagging with this plant is also listed as number BB-010502 which is offered separately.NOTE: This plant was operating two COOPER cubers but one is being kept by the owner for other purposes. Thus, the peripheral equipment will easily handle the output of two cubers.
Equipment Location:GREAT PLAINS
Bill Christoffersen
800-374-5009 ext:365
|
|
Pellet Manufacturing System, built in 2008 and later, comprised of the following major components: -- (2) Prepared material receiving and chained flighting, live-bottom feeding bins. -- Wood and polyethylene mixer (AKA “Ag mixer”). -- Various transfer and connecting screw and belt conveyors. -- (2) Custom-designed and custom-built Pellet presses. -- (2) Screw-bottom material feeding bins to feed pellet presses. -- (1) Bliss Model 12-289-G pellet cooler designed for larger pellet product. -- Low Pressure Pneumatic System comprised of high efficiency cyclone, DYNAMIC FAN CORP. Model OPW-19 with 50 HP Fan. -- (2) Electrical Control Containers each unitized and housing Programmable Logic Control (PLC), Input/Output (I/O) panel, CUTLER-HAMMER Motor Control Center (MCC) Cabinets with motor starters and disconnects and Main Distribution Panel (MDP), WONDERWARE HMI control software. -- The pellet presses are designed like a briquetter with a hydraulic plunger pushing material through the plate die. The die could be changed to make square or round briquettes. -- Currently, the pellets are approximately 1 inch in diameter. Dies are made in a local machine shop for low cost replacements.This system works nicely and the pellets were used to replace coal at a paper manufacturing plant. The pellet machines and system were designed by an engineer at the paper plant based upon known equipment.Material was dried in an MEC rotary drum dryer at the site. That machinery is listed as DB-010242 on our website.
Equipment Location:MIDWEST
Bill Christoffersen
800-374-5009 ext:365
|
|
NOVA PELLET N-Eco - 45 kW Pellet Mill; Low specific energy consumption per ton of pellet.Specifications: -- Capacity: 770 - 1,200 Lbs/Hr (350 - 550 kg/Hr) depending on the raw material. -- Main drive: 60 HP (45 kW). -- Pellet dimensions: 0.24" - 0.31" (6 - 8 mm) diameter. -- Raw Material: wood chips, sawdust, wood shavings; 0.02" - 0.06" (0.5 - 1.5 mm) length; 8 - 14% MC -- Die: 15" (380 mm) internal diameter; 0.6" - 2" (14 - 50 mm) long die holes. -- Roller: 7.2" (182 mm) outer diameter.General specification: -- Pellet Mill with mechanical and electrical functioning system. -- Pellet Mill with (1) die and (2) Rollers. -- Electrical cabinet with SIEMENS PCL system, touch screen, and remote modem connection. -- High efficience motors with IE2 standards (Energy Saving). -- Raw material dosing system (frequency controlled). -- Mechanical level sensor for the saw dust hopper. -- Vegetable oil for start and end of production cycle. -- Automatic grease lubrication for rollers and main shaft. -- Electrical safety locks. -- CE conformity certificate.
Equipment Location:MIDWEST
Bill Christoffersen
800-374-5009 ext:365
|
|
NOVA PELLET N-Eco Pellet Plant;Complete Wood Pellet Manufacturing Plant including Dryer and Bagging Line: -- Capacity: 770 - 1.320 Lbs/Hr (350 - 600 kg/Hr) -- Raw Material: wood chips, sawdust, wood shavings -- Power: 174 HP (130 kW) installed, 148 HP (110 kW) averageThe Pellet Plant consists of the following main components: -- Wood Chip Hopper: 110 cu. ft (3 cbm) volume; includes: Discharge Srcrew, Motor -- Rotary Drum Dryer: 770 - 1,100 Lbs/Hr (350 - 500 kg/Hr) dry material capacity, moisture reduction from 40 - 50% to 14%; includes: Cyclone, Rotative Valve, Electrical Cabinet with PLC -- Biomass Burner: approx. 220 Lbs/Hr (100 kg/Hr) Wood Chips, max. 25% moisture content -- Magnetic Separator -- Hammer Mill: 770 - 1,320 Lbs/Hr (350 - 600 kg/Hr) dry material capacity, 40 HP (30 kW) installed power, 0.78" x 0.78" x 0.2" max. grain size -- Dry Chip Silo: 180 cu/ft (5 cbm) volume, 83" (2,100 mm) diameter, 264" (6,700 mm) height; includes: Dust Filter, Pulse Jet Cleaning System, Safety System with Spark detection, Rotative Valve -- Pellet Mill (Type: N-ECO): 770 - 1.320 Lbs/Hr (350 - 600 kg/Hr) capacity, 60 HP (45 kW) main drive; includes: 1 x Die, 2 x Rollers, Electrical Cabinet with PLC -- Packaging Line (Type: N-Pack): manual operated line; includes: Vibrating Screen, Conveyors, Storage Hopper, Pneumatic Valve, 15 kG Bags -- Auxiliary equipment: Conveyors, Ducts for Dedusting, etc. -- Shippment to US port, Mechanical & Electrical installation, start-up, and training included.
Equipment Location:MIDWEST
Bill Christoffersen
800-374-5009 ext:365
|
|
NOVA PELLET N-Midi - 90 kW Pellet Mill with low specific energy consumption per ton of pellet. -- Capacity: 1,765 - 2,315 Lbs/Hr (800 - 1,050 kg/Hr) depending on the raw material. -- Main drive: 120 HP (90 kW). -- Pellet dimensions: 0.24" - 0.31" (6 - 8 mm) diameter. -- Raw Material: wood chips, sawdust, wood shavings; 0.02" - 0.06" (0.5 - 1.5 mm) length; 8 - 14% MC -- Die: 15.7" (400 mm) internal diameter; 0.6" - 2" (14 - 50 mm) long die holes. -- Roller: 7.2" (180 mm) outer diameter.General specification: -- Pellet Mill with mechanical and electrical functioning system. -- Pellet Mill with (1) die and (2) Rollers. -- Electrical cabinet with SIEMENS PCL system, touch-screen, and remote modem connection. -- High efficience motors with IE2 standards (Energy Saving). -- Raw material dosing system (frequency controlled). -- Mechanical level sensor for the saw dust hopper. -- Vegetable oil for start and finish of production cycle. -- Automatic grease lubrication for rollers and main shaft. -- Electrical safety locks. -- CE conformity certificate.
Equipment Location:MIDWEST
Bill Christoffersen
800-374-5009 ext:365
|
|
Complete Wood Pellet Manufacturing Plant including Dryer and Bagging Line: -- Capacity: 0.9 - 1.3 tons/Hr (0.8 - 1.2 metric tons/Hr) -- Raw Material: wood chips, sawdust, wood shavings -- Power: 335 HP (250 kW) installed, 295 HP (220 kW) averageThe Pellet Plant consists of the following main components: -- (1) Wood Chip Hopper: 706 cu. ft (20 cbm) volume; includes: Discharge Screw, Motor -- (1) Rotary Drum Dryer: 1.0 - 1.2 tons/Hr (0.9 - 1.1 metric tons/Hr) dry material capacity, moisture reduction from 25% to 12% (Optional: Dryer for higher moisture contents); includes: Cyclone, Rotative Valve, Electrical Cabinet with PLC (Optional: additional Dust Filter) -- (1) Biomass Burner: approx. 695 Lbs/Hr (315 kg/Hr) Wood Chips, max. 45% moisture content -- (1) Magnetic Separator -- (1) Hammer Mill: 1.0 - 1.4 tons/Hr (1 - 1.3 metric tons/Hr) dry material capacity, 100 HP (75 kW) installed power, 1.2" x 0.78" x 0.2" (30 x 20 x 5 mm) max. grain size -- (1) Dry Chip Silo: 565 cu. ft (16 cbm) volume, 124" (3,150 mm) diameter, 321" (8,150 mm) height; includes: Dust Filter, Pulse Jet Cleaning System, Safety System with Spark detection, Rotative Valve -- (2) Pellet Mill (Type: N-MIDI): each 1,100 - 1,540 Lbs/Hr (500 - 700 kg/Hr) capacity, 74 HP (55 kW) main drive; includes: (1) x Die, (2) x Rollers, Electrical Cabinet with PLC -- (2) Vibrating Screen -- (1) Pellet Cooling Coloumn -- (1) Packaging Line (Type: N-Pack): manual operated line; includes: Screen, Conveyors, Storage Hopper, Pneumatic Valve, 15 kg Bags, semi automatic Pallet Wrapping machine -- Auxiliary Equipment: Conveyors, Ducts for Dedusting, Fan for Silo loading, etc. -- Shippment to US port, Mechanical & Electrical installation, start-up, and training included.
Equipment Location:MIDWEST
Bill Christoffersen
800-374-5009 ext:365
|
|
NOVA PELLET N-Plus - 165 kW Pellet Mill with low specific energy consumption per ton of pellet. -- Capacity: 2.2 - 2.8 tons/Hr (2.0 - 2.5 metric tons/Hr) depending on the raw material. -- Main drive: 215 HP (160 kW). -- Pellet dimensions: 0.24" (6 mm) diameter. -- Raw Material: wood chips, sawdust, wood shavings; 0.02" - 0.06" (0.5 - 1.5 mm) length; 8 - 14% MC -- Die: 22.8" (580 mm) internal diameter; 0.6" - 2" (14 - 50 mm) long die holes. -- Roller: 9.4" (245 mm) outer diameter.General specification: -- Pellet Mill with mechanical and electrical functioning system. -- Pellet Mill with (1) die and (2) Rollers. -- Electrical cabinet with SIEMENS PCL system, touch screen, and remote modem connection. -- High efficience motors with IE2 standards (Energy Saving). -- Raw material dosing system (frequency controlled). -- Mechanical level sensor for the saw dust hopper. -- Vegetable oil for start and finish of production cycle. -- Automatic grease lubrication for rollers and main shaft. -- Electrical safety locks. -- CE conformity certificate.
Equipment Location:MIDWEST
Bill Christoffersen
800-374-5009 ext:365
|
|
NOVA PELLET N-Plus Plant, complete Wood Pellet Manufacturing Plant including Dryer and Bagging Line: -- Capacity: 1.5 - 2.4 tons/Hr (1.4 - 2.2 metric tons/Hr) -- Raw Material: wood chips, sawdust, wood shavings -- Power: 523 HP (390 kW) installed, 443 HP (330 kW) averageThe Pellet Plant consists of the following main components: -- (1) Wood Chip Hopper: 706 cu. ft (20 cbm) volume; includes: Discharge Screw, Motor -- (1) Rotary Drum Dryer: 1.5 - 2.0 tons/Hr (1.4 -1.8 metric tons/Hr) dry material capacity, moisture reduction from 25% to 12% (Optional: Dryer for higher moisture contents); includes: Cyclone, Rotative Valve, Electrical Cabinet with PLC (Optional: additional Dust Filter) -- (1) Biomass Burner: approx. 955Lbs/Hr (433 kg/Hr) Wood Chips, max. 45% moisture content -- (1) Magnetic Separator -- (1) Hammer Mill: 1.6 - 2.2 tons/Hr (1.5 -2.0 metric tons/Hr) dry material capacity, 177 HP (132 kW) installed power, 1.2" x 0.78" x 0.2" (30 x 20 x 5 mm) max. grain size -- (1) Dry Chip Silo: 1,130 cu/ft (32 cbm) volume, 154" (3,900 mm) diameter, 476" (12,100 mm) height; includes: Dust Filter, Pulse Jet Cleaning System, Safety System with Spark detection, Rotative Valve -- (1) Pellet Mill (Type: N-PLUS): 1.5 - 2.2 tons/Hr (1.4 - 2.2 metric tons/Hr) capacity, 215 HP (160 kW) main drive; includes: (1) x Die, (2) x Rollers, Electrical Cabinet with PLC -- (1) Vibrating Screen -- (1) Pellet Cooling Column -- (1) Double Pellet Bin: 159 cu/ft (4.5 cbm) volume -- (1) Automatic Packaging Machine: 5 bags/minute capacity; includes: Screen, Conveyors, Storage Hopper, Pneumatic Valve, 15 kg Bags, semi automatic Pallet Wrapping machine -- Auxiliary Equipment: Conveyors, Ducts for Dedusting, Fan for Silo loading, etc. -- Shipment to US port, Mechanical & Electrical installation, start-up, and training included.
Equipment Location:MIDWEST
Bill Christoffersen
800-374-5009 ext:365
|
|
PELLET.TOWER Pellet Manufacturing System. -- Complete modular, vertically designed Pellet Manufacturing System within a 65' tall free-standing tower containing all the Pellet Manufacturing equipment necessary on a 17' x 20' concrete pad including all pellet producing material handling & conveyor systems. -- 25,000 - 30,000 Tons annual pellet capacity from wood or agricultural waste streams. -- Tower includes: (6) Levels, vertically integrated on top of each other; an operator monitoring station is located at the ground level, processing equipment is in the top (5) levels. -- Each level has direct "walk-up" service and maintenance access without personal lifts, ladders, or other access devices. -- Complete integration of electric power supply & panels, Compressed Air, Air Filters, and Dust Collection, with safety controls linked throughout the automated system. -- System designed to run and be maintained by (1) on-site operator or off-site with remote PC monitoring of the entire process. -- Each level includes high quality brand name equipment: Hammer Mill at the beginning of the process, Material Holding & Dosing Bin, as well as the Dust Collection & Air Handling system at the very top of the Tower. -- Binding Agent System, multiple Foreign Material Separators, Water Dosing with moisture control; Ripening Silo; high production Pellet Mill, Pellet Cooler, final Screening Station on levels below. -- Includes following auxiliary equipment: Process Control with full Visualization (on Monitors), Fire Protection, Explosion Prevention, Dust Collection, Spark Detection, Water Distribution, Compressed Air, and a Central Vacuum Cleaning System that makes all a clean enclosed work environment. -- The 6-levels are in a completely self-contained steel structure, enclosed with insulated sandwich panels and weatherproof cladding. -- Post-installation, in case of relocation, the Tower can be divided into (4) units for transportation on flatbed trailers; dismantling & reconstruction requires approx.(6) weeks. -- Pricing includes "delivery to site, installation & training". Please ask for full quote with all specifics - and geared toward your location, material, and application!
Equipment Location:MIDWEST
Bill Christoffersen
800-374-5009 ext:365
|
|
The PELLET.TOWER is a modular, vertically designed Pellet Manufacturing System providing an innovative, but proven solution to biomass pellet fuel production."Single Tower Series": -- Capacity: 2.8 - 6.6 tons/Hr (2.5 - 6.0 metric tons/Hr); -- Installed power: 415 - 750 HP (310 - 560 kW); -- Dimensioins: 17' x 20' x 69' (5 x 6 x 21 m); -- Weight: 79 - 90 tons (72 - 82 metric tons)."Dual Tower Series": -- Capacity: 6.6 - 11.0 tons/Hr (6.0 - 10.0 metric tons/Hr); -- Installed power: 945 - 1,275 HP (705 - 950 kW); -- Dimensions: 32' x 18' x 75' (10 x 5.5 x 23 m); -- Weight: 157 - 165 tons (142 - 150 metric tons)."Triple Tower Series": -- Capacity: 10 - 15 Tons/Hr. (9.0 - 13.6 metric tons/Hr); -- Installed power: 1,542 – 1,823 HP (1,150 – 1,360 kW); -- Dimensions: 67.25' x 26.9' x 75.13' (20.5 x8.2 x 22.9 m); -- Weight: 232 - 243 tons (210 -220 metric tons).System Highlights: -- Over 100.000 Hrs operating experience. -- Modular system to produce high quality pellets; -- Standardizes components; -- Compact design (small footprint); -- No building required ("single machine"); -- Semi-mobile system (relocation possible).Main Components: -- Feeding bin; -- Binding agend adding; -- Foreign material separator; -- Hammermill; -- Air/material separator; -- Conditioning bin(s); -- Pellet mill(s); -- Central lubricator; -- Pellet cooler(s); -- Pellet screen(s); -- Exhaust air filter; -- Compressed air; -- Fire/spark detection & extinguishing; -- Central vacuum cleaning system; -- PLC control & visualization.
Equipment Location:MIDWEST
Bill Christoffersen
800-374-5009 ext:365
|
|
SPROUT 1.5 TPH Wood Pellet Plant with a capacity of 1.5 - 4 Tons/Hr (currently 1.5 TPH).The plant is comprised of the following major components: -- Small Feeding Hammer Mill Bin. -- SPROUT Hammer Mill with Magnet. -- JACOBSON Hammer Mill Model 2424. -- 2,000 CFM Fan system. -- 60" Dia. High Efficiency Cyclone. -- AGET Secondary Filter Receiver. -- (1) SPROUT 16" die diameter Model "501HL", V-Belt Pellet Mill with feeder-conditioner. -- 5 TPH Vertical Pellet Cooler with Fan and Cyclone assembly. -- Bucket elevator: 7" x 4" x 30' High. -- Finished product storage bin with 15-Ton capacity and 14" x 30' inclined and cleated belt conveyor. -- ROTEX Model 42, 40" x 84" double deck screener. -- Small Rotary Screener. -- Raw sawdust surge bin with chain conveyor. -- 40' Split-casing drag-chain hammermill infeed conveyor. -- Electrical Panel (see note below).NOTES: ● This system was installed with rebuilt equipment in 2008 and operated for only (18) months. The one pellet mill is rated for up to 1.5 tons per hour on wood. The remainder of the plant will handle up to 4+ tons per hour. Thus, other pellet mills can be added. ● No dryer system included. ● No bagging equipment included. ● No electrical controls included.
Equipment Location:MID ATLANTIC
Bill Christoffersen
800-374-5009 ext:365
|
|
SPROUT 21-250 Pellet Mill, Complete with 250 HP Main Drive Motor. This is a gear driven machine directly coupled to the drive motor. -- CPM Cooler with 7.5 HP Fan. -- Bucket Elevator. -- Pellet fines shaker Screen. -- This System is currently in operation making animal feed and is complete with a connecting conveyor. The Pellet Mill 250 HP Motor was new (1) year ago. The equipment is dusty but in great working condition. -- Price includes removal and loading onto Buyer's truck.
Equipment Location:GREAT PLAINS
Bill Christoffersen
800-374-5009 ext:365
|
|
SPROUT, Model 21V-200, Pellet Mill - REFURBISHED;Designed for a 21"dia. x 4" die (narrow die arrangement) (die Not included) complete with 3-Roller Assembly, a 18 x 54-SD Feeder-Conditioner and a Door-mounted Centri-Feeder (Force Feeder for wood). The refurbishing includes the following:• New (17) Belts.• Refurbished Main Shaft.• Rebuilt Quill.• New Roller Shell Assemblies.• New Seals & Bearings.• Stainless Steel Door-liner.• Includes Shear Pin Housing.• New 200 HP - 1,200 RPM 449T frame Motor - (Canadian or USA Voltage - Your Choice)• Replaced or repaired any worn parts as needed.• Prime and paint (choice of stock color).Capacity for wood pellet manufacturing: approximately 2 TPH.
Equipment Location:EASTERN CDN
Bill Christoffersen
800-374-5009 ext:365
|
|
SPROUT Model 21V-200 reconditioned Pellet Mill designed for a 21"dia. x 4" narrow width die (die Not included) complete with the following features and components: -- 18 x 54-SD Feeder-Conditioner. -- Door Centri-Feeder (Wood Force Feeder). -- 3-Roll configuration. -- Premium reconditioning includes (other levels Available): ● (17) New V-Belts. ● Refurbished main shaft. ● Rebuilt quill. ● New roll shell assemblies. ● New seals & bearings. ● Stainless Steel Door Liner. ● Includes Shear Pin Housing. ● New NAE 200 HP, 1200 RPM, 449T Frame Motor. (Canadian or USA Voltage) ● Replace or repair any worn parts as needed. ● Prime and paint (choice of stock color). -- Notes: ● Die not included. ● Allow 8 weeks for reconditioning except by agreed-to faster service.
Equipment Location:GREAT PLAINS
Bill Christoffersen
800-374-5009 ext:365
|
|
Rebuilt SPROUT 501-D Pellet Mill System with Cooler and Hammer Mill;Complete with the following additional items: -- 100 HP Main Drive Motor. -- New stainless steel Die for 3/8" pellets. -- New Drive Belt. -- Updated Feeder. -- Approximately 300 operating hours since rebuilt. -- Pellet Cooler with a capacity of (3) tons per hour. -- GRUNDLER Hammer Mill with 150 HP Drive Motor.NOTES: This model pellet mill is a animal feed type machine. Although in great condition, the pellet cooler and hammer mill have not been rebuilt.
Equipment Location:NORTHWEST
Bill Christoffersen
800-374-5009 ext:365
|
|
SPROUT Model 501H Pellet Mill with V-Belt Drive and the following additional features and components: -- 150 HP, 1200 RPM Main Motor. -- 14-groove, 42" Sheave for narrow Die. -- Top Mounted Feeder/Conditioner. -- New Roller Shells. -- OPTIONAL ITEM: New Centri-Feeder for Wood Applications - Add $5,000. -- This machine has not yet been reconditioned. Check with the Product Manager for lead times near the time of purchase. Current lead time is 5 to 8 weeks. -- Photos shown with this listing are representative only. --
Equipment Location:MIDWEST
Bill Christoffersen
800-374-5009 ext:365
|