Pallet Equipment For Sale
406 Results Found
$ 3,500
Heavy Duty Newman KM-1 Single Head Notcher w/ motor & starter box, w/ indexing head that will notch to unlimited length (3 ph, air cylinder needs rebuilt), Ref #155 Call Rachel 931-797-6284
Call for Price
Call for Price
Northtech FR-200 Frame SawSpecifications: -- Saw capacity of 6" width x 8" vertical capacity. -- Minimum working 2” high X 12” long. -- Main drive motor to saw frame is 30HP 3PH, wired 460 --V servo drive system to feed works is 1/4HP 3PH, --Blower to saw frame rack for added cleaning value is 3HP 3PH, -- Body of frame saw is (2) sections allowing for fast access to the saw frame, -- Saw blade speed is fixed at 550RPM, -- Dust extraction requires min 3000 CFM and is arranged with (4) 5" ports, -- Blade size is standard with 500mm L x 40mm W x 0.9mm body in stellite or TCT tip,Equipped with & Features -- Digital electronic oiling system provides proper lubrication to the saw frame guides -- Vertical rail system which allows optimum cooling and long term durability, -- (4) guide blocks are thermo- censored to allow auto shut-off of machine should possible heat buildup occur.Machine dimensions 122” L X 40” WX, 79” H weight 7100 lbs. Machine was new in 2007.
$ 16,675
NORTHTECH MRS-14N DIP-CHAIN GANG RIPSAWSpecifications, (to be verified): -- 27-1/8" max. working width -- 16" min. working length -- 5/16" min. & 4-1/2" max. working thickness -- 43 HP, 230/460/60 saw arbor motor, (3,570 RPM arbor) -- 14″ diameter rip saw blades, (can run 12" diameter blades) -- 70 mm diameter saw arborEquipped with & Features -- 3 HP, 230/460/3 feed motor, (30 to 120 ft/min.) feed speed range -- 33-1/2" working pass-line height -- Safety Anti-kickback fingers -- (2) 6" diameter dust-outlets -- 67" x 58" x 71" approx. overall dimensions
Call for Price
350 Pallets / 6-8 Cords | 480V | 2023 | BTUh 800,000 | Dimensions 40' L x 8' W x 9' 6" H Drying Time: Summer - Drying: 2 - 3 Days / Heat Treating: 2 - 4 Hours Winter - Drying: 3 - 5 Days / Heat Treating: 3 - 6 Hours
$ 10,950
OGAM - PO-340, ...Dip Chain Gang Rip Saw Specifications: -- 75 HP TEFC Motor, dip chain feed with overhead arbor. -- 4.3” x 13.3” Cut capacity. -- 16" Max. blade diameter. -- Power rise and fall. -- 70 mm dia. arbor. -- 2 HP Variable feed speed up to 115 FPM.Equipped with & Features: -- Automatic chain oiler. -- (3) Sets antikickback fingers. -- Adjustable infeed fence. -- Motor load meter. -- Many new saw blades.
$ 5,895
OGAM MODEL PO-340 DIP CHAIN GANG RIPSAW ( THis is a Parts machine only )Specifications: -- 60 HP arbor motor, dip chain feed with overhead arbor, 13-3/8" (340 mm) max. rip cap. (between saw blades), 12-5/8" chain width. -- 9-13/16" Mn. to 13-7/8" max. blade dia., 4-3/4" max. depth of cut (manual raise and lower of the spindle), 70 mm dia. arbor runs @ 4,200 RPM; min. board length 19-3/4" (without short stock feed plate-see photo). -- Variable speed belted feed motor 20 to 100 FPM (approximate).Note From Seller: Ogam Gang Rip Saw. 60 HP motor 230/460. I don’t know much about this machine. Bought it used but haven’t been able to hook it up due to our current electrical service. The person I bought it from says it ran well when taken out of service. Can load on a truck.
$ 11,900
OGAM - PO-340, ...Dip Chain Gang Rip Saw Specifications: -- 75 HP TEFC Motor, dip chain feed with overhead arbor. -- 4.3” x 13.3” Cut capacity. -- 16" Max. blade diameter. -- Power rise and fall. -- 70 mm dia. arbor. -- 2 HP Variable feed speed up to 115 FPM.Equipped with & Features: -- Automatic chain oiler. -- Magnetic Starters -- (3) Sets antikickback fingers. -- Adjustable infeed fence. -- Motor load meter. -- Many new saw blades. -- (3) Arbor sleeves & Spacers
$ 8,000
Call for Price
Call for Price
$ 8,500
Call for Price
Call for Price
Pallet Chief Skid Maker. 14' Skids. 60" wide. This machine only makes skids, has ejector chains but no stacker. #00769
Call for Price
Call for Price
2020 Pallet Inferno Heat Treating system Runs on Electrical "Like New" Has Read Outs HT Sanitizer Heat Treats & Sanitizes.