Pallet Chief For Sale

This item is in an Auction on exfactoryauctions.com. Go here to view item: http://exf.ac/i6r NEWMAN S-248 24" x 8" Single-Sided Planer Specifications: Planing thickness 1/16” - 8”. Min. stock length 13”, 4” Butted. Infeed & Outfeed table sizes 24" W x 16-3/4” L. Feed speeds 20 - 100 FPM. Equipped with: 4” Dia. 4-straight knife cutterhead. Segmented serrated upper with 2” W Spring-loaded segments & (3) Solid steel lower feed rollers. Chip breaker, with 2” W Reversible spring-loaded segments.

This Newman HP-688 press is powered by a 10 HP hydraulic pump. It consists of two 30? X 74? bays. Each bay has (3) individual 24? X 30? platens. Each platen is 15/16? thick and it’s back structure is webbed every 5-1/2? X 7-1/2?. Each platen is driven by a 5? hydraulic cylinder with it’s own control. The max daylight opening is 48? while the minimum is 37?. On the bottom you will find pop up bed rolls. Over all the press is in excellent condition, is extremely heavily built. This fully functional machine has been fully cleaned, checked, and is ready to work

Newman Knife Sharpener

Newman Whitney RH Drop Saw Trimmer

Newman S-382 with Helical Quiet Cut Planer Heads & Hydraulics to Run it. (not pictured)

Newman G20 Seller removed it from service in working condition. Ready to load!

Used Newman KM-16 sold as is. 4th head pivots for 45 degree cuts.

Used KM-16 sold as is. Qty. 4 heads, ability to cut 16' lumber. No Controls.

NEWMAN 990 Planer-Matcher 16 knife heads 6-roll fabricated frame 12" width capacity 6" thickness capacity Side head servo positioner Top head servo positioner Factory (Newman) conversion electric feed roll drive with 6 individual drive motors and direct coupled PlanetGear speed reducers on each feed roll. (25 HP) 150 HP Top Head 100 HP Bottom Head 75 HP Left Side Head 50 HP Right Side Head Several spare side heads Spare 75 HP left side head motor All standard TEFC motors All air and hydraulic valves are new in 2019 Also includes 2019 Newman pineapple feed table with electric drives 3 each 20 HP direct drives on top feed rolls with PlanetGear Reducers 1 ea 25 HP direct drives on top feed rolls with PlanetGear Reducer Newman bridge with direct drive and PlanetGear Reducer 2019 aux hydraulic pump unit for press roll positioning & pressure bar Omega moisture detection & marking equipment 5-strand deck 16' wide x 11' long with hook stops, with tipple on tail end, with additional short 55-strand integrated into the feed table.

Newman HP-688 Twin Bay Hydraulic Cold Press6-Sections (top platens) each 24" x 30" each, Center posts between third and fourth platens, creating two overall areas of 30" x 74". Specifications: -- Max. fixed opening 48" with 11" cylinder stroke, each platen section has (1) 10" bore with 5" dia. ram cylinder; -- Each platen is 15/16″ thick and it’s back structure is webbed every 5-1/2″ X 7-1/2″. -- Side-mounted self-contained hydraulic system w/tank, 10 HP continuous operating pressure compensating pump. -- Hand-Valves to Cycle Individual Platens with pressure gauges for each platen. -- Idle Pop-Up Bed Rollers in the bottom platen for easy loading and unloading.Over all the press is in excellent condition, is extremely heavily built, and is also a beautiful impressive press in person.

Newman G-280 Knife Grinder

6” x 18” capacity 15 HP feed 50-150 FPM 25 HP top head 40 HP bottom head new rubber drive wheels push button controls includes cutter grinder

Newman 382 Helical HD DBL Surface Planer

Newman M512 Planer Moulder 5 Head Tooling For D Log 16" X 8" Capacity Pendu Notcher Also Available

Newman K20 Trim Saw (2) Blades - Aprox 20" diameter Infeed deck is about 40' long. No chain is included.

These machines were purchased new and removed from the current production line for a large hammermill. Ready to load. No conveyor available. - Newman SS24 - Two machines available. - 100 HP Motor on 600 V. Can be changed to 480 V.

Newman G200 Knife Grinder

Newman Chamfering Machine

Two Newman Shaving Mills Both mills have 2-heads Already pulled out of service and ready to ship.

NEWMAN Trimmer System. Model KNO 24. Will trim 8' to 16' with adjustable '0' saw. Trimmer includes 7.5 HP motors on each saw with aluminum wheel hold downs; saw blades; chain type waste conveyor in trimmer; electric variable speed feed chains. System includes: 5 strand lumber deck with 81X chain by 13' long with lumber stops; 4 strand tipple to discharge boards when raised; 6' x 5 strand board dealer with 5 dealer wheels to feed boards to trimmer; 25' long x 30" wide lumber belt under tipple; 30' x 24" waste belt from trimmer waste chain. NOTE: Equipment loaded on your truck and  located in Biscoe, NC. Price $28,900.00. OBO