Equipment For Sale

Brand new Hydraulic Disc Screener in stock. This is perfect to clean all your firewood after your conveyor. 6.5 feet long

Brand New Rabaud Xyloflam 330/450 Gas Powered kindling machine Comes with a waste tray, bagging system, reception platform.

Brand New in stock PTO Version with a 28 way wedge. 80 ton Splitter. 31.5 inch round log it will split.

Different rectangular jigs to better fit the pallet: 80x120 cm, 100x120 cm, 120x120 cm. Industrial machine with hydraulic vibrating system for a better positioning of the log to gain a steady shape for palletising and for a better filling optimisation - a RABAUD exclusivity. Stretch and watertight plastic film (for dry wood) or net (green wood) Reel support with adjustable net tension system through a restrained roller. Hydraulic lifting system of the drum. Maximum height: 1.85 m (including the pallet)). Machine managed by a module. The operator can access the parameters to modify the net tension, number of turns and the timing of drum lifting. Possibility to wrap down with the drum placed in high position. Radiocontrolled machine. Hydraulic unit with three-phased electric engine (7.5 kw).

Brand New 3 phase Electric. Cuts up to 31.5 inch log. Makes the perfect piece every time. Large operator cab. Auto split system.

Firewood Splitter 80 Ton 80 ton power with double automatic cylinder speed. 16,24,28 way wedge options Deutz Diesel Engine With a Log Loader that goes out 25 Feet Debris Cleaner and conveyor

Battery powered wood chipper. Machine does not have an engine. Plug it in and the next day you are good to tow it to a job. 5 hours of run time. Chip up to 6 inches.

The XYLOFLAM 200/250 is a machine for producing kindling sticks in nets of 5,26 or 10,56 GB. The machine accepts all types of wood. • Designed for scantling, cracked or round timber of all species (soft or hard wood). • Max. wood length 8’’ and max. diameter 10’’. • Feeder platform in sturdy steel with an adjustable hydraulic progress. • Splitting wedge with 5 Tons power. • 2 types of wood bagging : in bulk with rotative bags unit (4 bags max.) or piled up bagging. • Possibility of using bags of 5,26 or 10,56 GB. • Maximum output (depending on log cross-section): 2.4 m³/h, i.e. 120 x 20-litre bags per hour or 60 x 40-litre bags per hour. - In the EM version : output is divided by 30 %. - In the INDUS version : output multiplied by 30 %

Electric 520 STOP THE RESPLIT CUT WITH A KNIFE NOT A WEDGE PERFECT PIECES EVERY TIME Cuts up to 20 Saw blade with changeable teeth Extended Infeed Deck 25 Ft Disc Screener attached 25 Ft Radial Stacker Saw Dust Collecter Waste conveyor for cutoffs Waste conveyor under the disc screener Auto Splitt mode Can be customized

RADER - Trailer Dumper with 30 ft. Tipping DeckComes with the following components and features: -- This unit was installed at the current location in approx. 1971 and is reportedly in great working order and condition. -- Previously used for Dumping Wood Chip Trailers. -- Professional rigging and loading is available. Decks are often extended for longer (53 ft.) trailers.

Rader Air Lock

Metal airlock feeder, rotary valve, Rebuilt or new?? 16" x 10", shaft diameter 2-1/8", motors available, The roter has 8 blades on it and each blade has a number on them-view photos for additional details, stored inside, Shipping Dimensions: 20" wide X 32" Long X 24" Tall, Weight 450 LBS., contact us for a freight rate.

Rader 20" x 20" Airlock

used Rader feeder/airlock, 25 x 30inch feeder, Rader 25" x 30" esw feeder, serial# PM 1217, pneumatic conveying adapter mounted to bottom of airlock (air swept) discharge pipe ( 18” & 19”)and stand, 5HP, 230/460 volt, RPM 1745, 184T frame, speed reducer: Falk model 4207J 25 gear drive- ration 24.99:1, used metal airlock, used metal feeder Rader metal wheel rotary feeder valve airlock speed reducer and motor, feeder body was repainted, will provide demonstration video during test run.

RADICON gear reducer: 100:1; 5 HP. Price $800.00. As-is/where-is. (Inv. # G-15).

This Rainmann Ripsaw will need to have the blades replaced and other than that, it is in good condition.

RAIMANN - KM-310, ...Gang (Multi-Blade) Rip Saw12-1/4" Max. width cap., 13-1/2" chain width, 50 HP - 4,200 RPM V-belt driven arbor.Features: -- "Quickfix Hydro-Quick" Arbor: Multiple Saw blades are mounted on the arbor, they slide up-and-down the arbor into position and lock into place by tightening the end of the arbor; no tools & no spacers required. -- Frequency controlled feed speed of 13 - 110 FPM, 2.2 HP feed drive, chain spikes every 3rd chain link, automatic chain lubrication.Specifications: -- 300 mm (11.8") Max. saw blade dia. with 80 mm (3.15") bore, 65 mm (2.55") dia. arbor. -- Provides 3" max. depth of cut with pressure shoe, 3-1/2" depth of cut without. -- Manual thickness adjustment of upper holddown rolls with indicator scale. -- 6" Throat depth to the right of blade; 7/8" min. strip width, 17-3/4" min. stock length.Equipped with: -- (4) Sets of top & bottom antikickback fingers. -- Extended infeed with additional bed roll, and adjustable infeed fence. -- Motor load meters and automatic STAR DELTA starting. -- Automatic over thickness shutoff on infeed and 7-1/4" dia. dust hood. -- (4) Laser lights.Also included: -- (6) Used blades.

RAIMANN KR 310 2M Multiple Blade Rip Saw System with Valu-Rip Infeed12-1/4" Max. width cap., 13-1/2" chain width, 50 HP - 4,200 RPM V-belt driven arbor.Equipped with: -- Quick Fix arbor with: (2) Movable blades and (3) fixed blades; (5) Laser Lights. -- Enlarged movable saw housing with 25" pass-through. Ball threaded adjustment of spindle. Saw blades mounted to individual collars. -- Chain with spikes every 3rd link, with automatic oiler with indicator light. -- Driven fluted lower roller with smooth upper roller for smooth feeding. Auto oiler for guide lubrication. -- (4) Sets of anti-kickback fingers and 12" dia. dust hoods. -- Raimtech E5 with TimberMax Software optimizing software; making it possible to get the most out of incoming lumber. The software optimizes rips for width or grade. TimberMax calculates the most profitable ripping solution for each board at which time shifting saw blades are positioned automatically. Infeed includes an infeed-belt conveyor with a pressure roller. Infeed is mounted on a slide that automatically adjusts the board in the best position before entering the saw. The conveyor is 24" wide X 120" long.Cutting Specifications: -- The cutting depth with 12" Dia. saw blades is 2-1/2" with a pressure shoe and 4" without a pressure shoe. -- The variable feed speed is 16 - 158 FPM, and the feed drive is a 2 HP motor.Features: -- Sound enclosure with vertical pneumatic lifting -- Adjustable infeed fence. -- Automatic over-thickness shutoff on infeed. -- Automatic starting and swing arbor mount for control panel.Also included: -- Valu-Rip infeed system 16' long -- (4) Movable Laser light Note: The machine, chain feed, and arbor, have recently been refurbished.

RAIMANN KM-US BV Gang Rip Saw with one (1) Moving BladeSpecifications: -- (1) Shifting blade with foot pedal control; -- Fixed blades mounted to individual collars that slide up-and-down the arbor into position, then lock into place by tightening the "Quick fix" nut on the arbor, no tools & no spacers required. -- 12" Dia. saw blades, 65 mm (2-1/2" dia.). -- Arbor, 3-1/2" max. depth of cut. -- 20" centers between upper holddown rollers (wood holddown shoe plate not included). -- 6" Throat depth to the right of the blade. -- 3/4" Min. strip width, 21" min. stock length.Equipped with & Features: -- Variable feed speed 16 - 110 FPM, -- Feed drive 1.2 HP motor; -- Chain spikes every 3rd chain link, -- Automatic chain lubrication, -- (2) Sets of top & bottom anti-kickback fingers, -- Extended infeed with additional bed roll, adjustable infeed fence. -- Complete with: Automatic over-thickness shutoff on infeed, -- Automatic starting, -- 8" Dia. dust hood. -- Includes (4) Lasers and Tooling as pictured.

RAIMANN (WEINIG) - Variorip 310 M with: Infeed & (2) Moving Blades SystemClean, very hard-to-find 2014 (Infeed 2022) WEINIG RAIMANN Variorip 310 M: Optimizing Rip Saw with (2) moving blades & Infeed SystemSpecifications -- Working dims. Length: 24″ to 184″; width to 12.2″ (310 mm); thickness 0.59″ to 3.94″ (184″ is fence length). -- Cutting dims: Width min. 5/8″ (1st movable blade); min. 1-5/8″ to 10-1/4″ (2nd movable blade); fixed pocket 1″. -- Production in auto mode: 7 x 10′ Boards per minute. -- Saw. 50 HP Motor with: Arbor dimension of 2.6″; RPM: 4,200. -- Quick fix arbor (handturn nut) for position blades. -- Saw blade dia.: 12″ to 14″ (300 - 350 mm). -- Blade positions by: Ball screw adjustment. -- Chain: 12-3/4″ Width steel chain with every 3rd link with spikes. --. Automatic oiler for chain lubrication. -- The chain has auto shutoff when the oil level is low.Roto chain brush for: Continuous chain cleaning of debris. (4) Sets of anti-kickback fingers. -- Feed: Variable 26 - 157 FPM (8 - 48 MPM); 3 HP motor.Equipped with and Features: -- Controller: RAIMANN "TimberMAX" with: 15″ Color screen' storage for (100) cut lists. -- Production recording and yield. -- Also includes: (4) Lasers with mounts; spare parts; manuals.Footprint & Weight: Infeed is 3,306 Lbs and roughly 8' x 16'.Saw is: 4,603 Lbs and roughly 6' x 6'.The Saw slightly offsets the infeed. So, the footprint together is a little larger; ...probably closer to 9' x 23'.NOTE Saw is: 2014 INFEED is 202SOME Spec's need to be verified.