Biomass Equipment For Sale

MEC 10x40 Single Pass Drum Trunions Controls

MEC Drum Drying System. Includes 30MM BTU Webb Burner, Airlock, and 250 HP I.D. Fan. Suitable for a large pellet mill, shavings operation, or other drying needs.

12x42 Triple Pass Drum Sawdust Burner Controls Cyclone Pipiing Blower

MEC 12'x42' Triple Pass Drum Trunions Cyclone available

MLS Number 13567192 Mercodor Industrial Shredder Just under 2 hours of use Shredder with base Outfeed conveyor with permanent magnet belt 2 x 20Hp 480 volt/60Hz Knives 20 mm 5 hooks Machine opening 1200 mmx 600mm Can process trim ends, sawdust and plastic Machine is still set so we may process wood or plastic for samples if required.

MOLLERS HSA Automatic Stretch Hooding SystemSpecifications: -- Max. pallet size: 48" x 48" x 120" -- Capacity: up to 120 units per hour (depending on load height and length) -- Main motor: 2 HPFeatures: -- Fully automatic -- Tubular film is automatically fed and stretched over the load -- Handles a variety of load heights automatically

MOLLERS HSA Automatic Stretch Hooding System with Corner Board ApplicatorSpecifications: -- Max. pallet size: 48" x 48" x 120" -- Capacity: up to 120 units per hour (depending on load height and length) -- Main motor: 5 HP -- Corner board system: -- Automates the process of placing 4 corner boards. -- Each corner board magazine can hold up to 30 corner boards. -- Carousel design, servo driven corner board applicator allows for precise positioning during corner board retrieval and for proper staging.Features: -- Fully automatic -- Tubular film is automatically fed and stretched over the load -- Handles a variety of load heights automaticallyApplications include: -- Pallets of smooth boxes or uneven containers that need to be secured on a pallet -- Cereal / grain based products -- Chemical / industrial -- Prepared / convenience foods -- Household goods -- Snack foods

In good condition. Has 50” opening. No drive motor but would take 100-200HP depending on material being run. No screen included. Very heavy weighs approximately 4 ton.

Jacobson Swing Hammer Mill, Top Infeed, Bottom Discharge, 75HP Electric Motor.

Montgomery Blo Hog S/N 781 ER18" HDGM Drop Feed w/75HP Motor

MONTGOMERY BLO-HOG Top-Feed Wood GrinderSpecifications: -- 13" x 18-1/2" Top feed opening; 75 HP direct drive motor at 1,200 RPM. -- Unique cutting action involving stationary anvils positioned on the side of the machine with rotating teeth (hammers) that pass through rectangular pockets formed by these anvils. -- This positive cutting action between the teeth and anvils performs what amounts to the first particle-sizing function in a two stage process. -- The second sizing action occurs when the material cut by the action of the teeth against the anvils is directed downward and across a curved particle-sizing screen which fits underneath the rotating element. -- The machine is mounted on a elevated base providing ample room for discharge. -- Actual model is ER 18S315FHDL.

2011 Morbark 40/36 Drum Chipper 7400 hours. John Deere 600 HP engine , It has been through shop completely. Width: 8'6" Length: 37'5" Height: 12'4.25" Gross weight: 52,500 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Morbark 6600 Horzontal Grinder with 7,600 hours, Cat C-32 Engine, 1050hp, 5th Wheel, Radio Remote, Magnetic Head Pulley. Weight: 91,440 lbs. Length: 44'11" in transport Height: 13'6" in transport Width: 11'10" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2010 Morbark 6600 Horizontal Grinder, Cat C32 1200hp with 5,596 hours, Radio remote, Magnetic head pulley. Weight: 91,440 lbs. Length: 44'11" in transport Height: 13'6" in transport Width: 11'10" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Morbark 1300 Tub Grinder, Cat C27 1050hp with 7,400 hours, Air Compressor, Loader, Magnetic head pulley. Weight 88,000 lbs Height 13' 6" Width 11' 11" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Morbark 50/48X -5,591 hours -Brand new wet clutch -New gearbox -New EGR Cooler -The drum has new knife holders, clamps, and bolts. -Comes with 5 sets of knives and 2 sets of counter knives Hours will rise as it is a working unit!!!!!!

2012 Morbark 30/36 Chipper aka The Mountain Goat -4145 hours - C-18(500H.P) -Advantage 3 Drum -Grapple -Wireless remote -Grapple unit -Auto clutch -New belts -Serviced Regularly

1993 Morbark 1000 Tub Grinder -Hours unknown -3406B CAT engine 425 HP -No blowby -Rods and spacers been replaced with oem parts -Clutch new -Hammers new Turn key good little grinder !!!!!!!!!!!

2022 Morbark 3000XT Horizontal Grinder -500 hours -(C-15) 600 H.P -Like new unit