Mellott For Sale

Quincy screw compressor, Model; QSI245ANA31A, Serial #; 94877, 50 hp electric power, 69,848 hrs, good working condition

Never started it so do not know if it works

QUINCY QSVB-25ANN2F VACUUM PUMP:25 HP "QSVB Series": 371 CFM, 29.9"HgV rotary screw vacuum; positive lubrication fluid pump; 3″ inlet and 2″ exhaust port. -- Equipped with:Modulating inlet valve; temperature regulating valve; high discharge temperature shutdown system with manual reset. -- Complete with:Control panel; electrical enclosure; gauges; exhaust separation system; spin on fluid filter; (2) magnetic motor starter kits as pictured. GREEN ONE MODEL #PKT; SERIAL #981113937. - GREY ONE MODEL #SK25; SERIAL #0101-2-SK25 KVAR54.NOTE: The Pump only has (6,935) total hours on the meter!

Quincy 75HP Screw Compressor Serial# 940351

Quincy QSI-500 100hp Screw Compressor S/N 917823 36,264 Hrs

Quincy Air Compressor

QSI-500 100hp Screw Compressor S/N 95571 33,495 Hrs

TWO (2)150 HP QUINCY ROTARY SCREW AIR COMPRESSORS MODEL # 740B S/N: 800170; AND MODEL # 650H S/N: 73861. Service center tested and ready to go.

50HP Quincy air Compressor Rotary Screw Air

used Rader feeder/airlock, 25 x 30inch feeder, Rader 25" x 30" esw feeder, serial# PM 1217, pneumatic conveying adapter mounted to bottom of airlock (air swept) discharge pipe ( 18” & 19”)and stand, 5HP, 230/460 volt, RPM 1745, 184T frame, speed reducer: Falk model 4207J 25 gear drive- ration 24.99:1, used metal airlock, used metal feeder Rader metal wheel rotary feeder valve airlock speed reducer and motor, feeder body was repainted, will provide demonstration video during test run.

Metal airlock feeder, rotary valve, Rebuilt or new?? 16" x 10", shaft diameter 2-1/8", motors available, The roter has 8 blades on it and each blade has a number on them-view photos for additional details, stored inside, Shipping Dimensions: 20" wide X 32" Long X 24" Tall, Weight 450 LBS., contact us for a freight rate.

RADER - Trailer Dumper with 30 ft. Tipping DeckComes with the following components and features: -- This unit was installed at the current location in approx. 1971 and is reportedly in great working order and condition. -- Previously used for Dumping Wood Chip Trailers. -- Professional rigging and loading is available. Decks are often extended for longer (53 ft.) trailers.

Rader 20" x 20" Airlock

Rader Air Lock

RADICON gear reducer: 100:1; 5 HP. Price $800.00. As-is/where-is. (Inv. # G-15).

Raimann KM310M Rip Saw ValuRip Infeed System One moving Blade

This Rainmann Ripsaw will need to have the blades replaced and other than that, it is in good condition.

RAIMANN (WEINIG) - VarioRip 310 M: Infeed & (2) Moving Blades SystemClean, very hard-to-find 2014 (Infeed 2022) WEINIG RAIMANN Variorip 310 M: Optimizing Rip Saw with: (2) Moving Blades & Infeed SystemSpecifications -- Working dims: Length: 24″ to 184″; width to 12.2″ (310 mm); thickness 0.59″ - 3.94″ (184″ is fence length). -- Cutting dims: Width min.: 5/8″ (1st movable blade); min. 1-5/8″ - 10-1/4″ (2nd movable blade); fixed pocket: 1″. -- Production in auto. mode: 7 x 10′ Boards/Min. -- Saw. 50 HP Motor with: Arbor dimension of 2.6″; RPM: 4,200. -- Quick fix arbor (handturn nut) for position blades. -- Saw blade dia.: 12″ - 14″ (300 - 350 mm). -- Blade positions: Ball screw adjustment. -- Chain: 12-3/4″ Width steel chain with every 3rd link with spikes. --. Automatic oiler: For chain lubrication. -- The chain has auto. shutoff when the oil level is low.ROTO Chain brush for: Continuous chain cleaning of debris; (4) sets of anti-kickback fingers. -- Feed: Variable 26 - 157 FPM (8 - 48 MPM); 3 HP motor.Equipped with & Features -- Controller. RAIMANN "TimberMAX" with: 15″ Color screen storage for (100) cut lists. -- Production recording and yield. -- Also includes: (4) Lasers with mounts; spare parts; manuals.Footprint & Weight: Infeed: 3,306 Lbs & Roughly 8' x 16'.Saw: 4,603 Lbs & Roughly 6' x 6'.The Saw slightly offsets the infeed; the footprint together is a little larger (...probably closer to 9' x 23').NOTE: Saw is: 2014, INFEED is 202.SOME Spec's need to be verified.

RAIMANN - KR 310 2M: Multiple Rip Saw System (2 Moving Blades)12-1/4" Max. width cap.; 13-1/2" chain width; 50 HP - 4,200 RPM V-belt driven arbor.Equipped with & Features -- Quick Fix arbor with: (2) Movable blades; (3) fixed blades. -- Movable Operator pedestal with: LED Screen; pushbutton controls. -- Chain with spikes every 3rd link; automatic oiler with indicator light. -- Driven fluted lower roller with: Smooth upper roller for smooth feeding.Auto. Oiler for guide lubrication. -- (4) Sets of anti-kickback fingers; 12" dia. dust hoods.Cutting Specifications -- Blade Diameter: 9.8" - 15". -- Cutting depth with: 12" Dia. saw blades; 2-1/2" with pressure shoe; 4" without pressure shoe. -- Variable feed speed: 16 - 158 FPM; feed drive: 2 HP Motor.Additional Features -- Sound enclosure with vertical pneumatic lifting. -- Adjustable infeed fence. -- Automatic over thickness shutoff on infeed. -- Automatic starting and swing arbor mount for control panel.

RAIMANN KR 310 2M Multiple Rip Saw System ( 2 Moving Blades )12-1/4" Max. width cap., 13-1/2" chain width, 50 HP - 4,200 RPM V-belt driven arbor.Equipped with & Features: -- Quick Fix arbor with: (2) Movable blade and (3) fixed blades; (4) Laser Lights. -- Enlarged movable saw housing with 25" pass through. Ball threaded adjustment of spindle. Saw blades mounted to individual collars. -- Chain with spikes every 3rd link, with automatic oiler with indicator light. -- Driven fluted lower roller with smooth upper roller for smooth feeding. Auto oiler for guide lubrication. -- (4) Sets of anti-kickback fingers and 12" dia. dust hoods. Cutting Specifications -- Cutting depth with 12" Dia. saw blades, 2-1/2" with pressure shoe; 4" without pressure shoe. -- Variable feed speed, 16 - 158 FPM, feed drive 2 HP motor.Additional Features -- Sound enclosure with vertical pneumatic lifting -- Adjustable infeed fence. -- Automatic over thickness shutoff on infeed. -- Automatic starting and swing arbor mount for control panel.Note: Transformer for 600 volts included if necessary