Mellott For Sale

Never started it so do not know if it works

QUINCY QSVB-25ANN2F VACUUM PUMP:25 HP "QSVB Series": 371 CFM, 29.9"HgV rotary screw vacuum; positive lubrication fluid pump; 3″ inlet and 2″ exhaust port. -- Equipped with:Modulating inlet valve; temperature regulating valve; high discharge temperature shutdown system with manual reset. -- Complete with:Control panel; electrical enclosure; gauges; exhaust separation system; spin on fluid filter; (2) magnetic motor starter kits as pictured. GREEN ONE MODEL #PKT; SERIAL #981113937. - GREY ONE MODEL #SK25; SERIAL #0101-2-SK25 KVAR54.NOTE: The Pump only has (6,935) total hours on the meter!

Quincy 75HP Screw Compressor Serial# 940351

Quincy QSI-500 100hp Screw Compressor S/N 917823 36,264 Hrs

Quincy Air Compressor

QSI-500 100hp Screw Compressor S/N 95571 33,495 Hrs

TWO (2)150 HP QUINCY ROTARY SCREW AIR COMPRESSORS MODEL # 740B S/N: 800170; AND MODEL # 650H S/N: 73861. Service center tested and ready to go.

50HP Quincy air Compressor Rotary Screw Air

Quincy screw compressor, Model; QSI245ANA31A, Serial #; 94877, 50 hp electric power, 69,848 hrs, good working condition

used Rader feeder/airlock, 25 x 30inch feeder, Rader 25" x 30" esw feeder, serial# PM 1217, pneumatic conveying adapter mounted to bottom of airlock (air swept) discharge pipe ( 18” & 19”)and stand, 5HP, 230/460 volt, RPM 1745, 184T frame, speed reducer: Falk model 4207J 25 gear drive- ration 24.99:1, used metal airlock, used metal feeder Rader metal wheel rotary feeder valve airlock speed reducer and motor, feeder body was repainted, will provide demonstration video during test run.

Rader 20" x 20" Airlock

Rader Air Lock

Metal airlock feeder, rotary valve, Rebuilt or new?? 16" x 10", shaft diameter 2-1/8", motors available, The roter has 8 blades on it and each blade has a number on them-view photos for additional details, stored inside, Shipping Dimensions: 20" wide X 32" Long X 24" Tall, Weight 450 LBS., contact us for a freight rate.

RADER - Trailer Dumper with 30 ft. Tipping DeckComes with the following components and features: -- This unit was installed at the current location in approx. 1971 and is reportedly in great working order and condition. -- Previously used for Dumping Wood Chip Trailers. -- Professional rigging and loading is available. Decks are often extended for longer (53 ft.) trailers.

RADICON gear reducer: 100:1; 5 HP. Price $800.00. As-is/where-is. (Inv. # G-15).

Raimann KM310 Rip Saw Per seller: The saw runs material. The variable infeed is stuck on one speed.

Raimann KM310 Rip Saw Weinig Quick-Fix System

Raimann KM310M Rip Saw 2 Moveable Blades

RAIMANN - KM-310, ...Gang (Multi-Blade) Rip Saw12-1/4" Max. width cap., 13-1/2" chain width, 50 HP - 4,200 RPM V-belt driven arbor.Features: -- "Quickfix Hydro-Quick" Arbor: Multiple Saw blades are mounted on the arbor, they slide up-and-down the arbor into position and lock into place by tightening the end of the arbor; no tools & no spacers required. -- Frequency controlled feed speed of 13 - 110 FPM, 2.2 HP feed drive, chain spikes every 3rd chain link, automatic chain lubrication.Specifications: -- 300 mm (11.8") Max. saw blade dia. with 80 mm (3.15") bore, 65 mm (2.55") dia. arbor. -- Provides 3" max. depth of cut with pressure shoe, 3-1/2" depth of cut without. -- Manual thickness adjustment of upper holddown rolls with indicator scale. -- 6" Throat depth to the right of blade; 7/8" min. strip width, 17-3/4" min. stock length.Equipped with: -- (4) Sets of top & bottom antikickback fingers. -- Extended infeed with additional bed roll, and adjustable infeed fence. -- Motor load meters and automatic STAR DELTA starting. -- Automatic over thickness shutoff on infeed and 7-1/4" dia. dust hood. -- (4) Laser lights.Also included: -- (6) Used blades.

RAIMANN KM 310 1M - Movable Blade Gang Rip Saw; 12-1/4" Max. width cap.; 13-1/2" chain width; with 25" width clearance,Specifications: -- 50 HP - 4,200 RPM V-belt drive arbor with (1) movable and (2) fixed blade; shifting blades positioned from operator controls. -- As the computer or operator moves blade, laser light follows; fixed saw blade with "Quick Fix" hydro-arbor is mounted on an individual collar that slides up-and-down the arbor into position, then locks into place by tightening end of arbor; no tools & no spacers required.Equipped with: -- Blade capacity 11" to 14.1" (280 -380 mm) Dia. saw blades, 65 mm (2-1/2" dia.) arbor, 4-1/4" max. depth of cut, 17-3/4" centers between upper holddown rollers (phenolic pressure holddown shoe plate included); 3/4" min. strip width, 19-1/2" min. stock length. -- Variable feed speed from 13 - 115 FPM, feed drive 2.2 HP motor, provision for chain spikes every 3rd chain link, automatic chain lubrication. -- (2) Sets of top & bottom anti-kickback fingers, extended infeed with additional bed roll, and adjustable infeed fence.Complete with: -- Automatic over-thickness shutoff on infeed. -- (4) Laser Lights. -- Automatic STAR-DELTA starting. -- "ProfiCut 1" PLC Controls. -- 8" Dia. dust hood. -- Includes with approx. (9) blades.Dimensions: 85" x 56" x 73" H. Weight: 3,750 Lbs.Note: Stated condition reflects that the chain is worn and per owner "?Chain should be replaced."