Mellott For Sale

KOCH BD-A BORING MACH. (FEED THRU CNC): -- Specifications: Model BD-A Boring Machine for straight rail-stock work pieces for Horizontal & Vertical Drilling; Infeed and outfeed pass height is 36.2" (920 mm) . The work pieces are transported through the working stations by means of a cam transport system.Stock is worked in clamped position. -- Stock dimensions: Stock length 9.8" - 59" (250 - 1500 mm), Stock width 1.50" - 9.8" (38 - 250 mm), Stock thickness 0.63" - 1.18" (16 - 30 mm) Note: The specified dimensions do not allow all possible combinations. -- Horizontal drilling station:Each side with (1) drilling unit with 2.7 HP (2 kW) - 3,400 RPM, Each horizontal boring heads with (3) Spindle Type D-1277 boring chucks on 16 mm centers;10 mm dia shank & 70 mm max bit lengthEach head moving on linear guides with, drilling depth control, dust extractor hoods, blow-out jets to clean holesLinear path control for stock transport with low profile machine bed and linear guides, fixed stock stops,Adjustable working stations with motorized width adjustment. -- Vertical Drilling head with rotating device:(2) LH & (2) RH Type D -1277, 2.7 HP (2 kW) Adjustable vertical boring heads with dust extraction hoods & variable speed from 3,000 - 6,000 RPM; Each Drilling chuck with (1) Drilling Spindle per chuck. Drilling Chucks with KOCH "QC" (quick change) system & rotating device each head; 10 mm dia drill bit shank & 70 mm max bit lengthEach head moving on linear guides with, drilling depth control, dust extractor hoods, blow-out jets to clean holesLinear path control for stock transport with low profile machine bed and linear guides, fixed stock stops,Mechanical digital read out for manual finite adjustment, (2) air hold down clamps, foot pedal control to start activation. -- Features:The stationary machine side is on the LH side (seen in transport direction) and not adjustable. The RH is adjustable via NC controlled "X" axis.The machine is equipped with Hopper Feed & has a part stack capacity of approx 9.8" (250 mm) & working capacity of approx 48 Pieces/Min.Stock infeed belts move the workpiece through an intermediate hopper to the stock support. Then the workpiece is transported through the working stations by means of transfer belts with lateral stock alignment; working pass height (36.2" (920 mm).Stock is worked in clamped position; There are stock outfeed belts at the machine outfeed. The workpiece is transferred to the out-feed hopper & removed manually. -- Operator & Machine Control:Beckoff SPS PLC for running the machine. -- Complete With: Open Station to add Dowel Inserting units at a later time ( Dowel units are not included) Manual Hand Pump Central Lubrication system for working units (1) NC controlled positioning of machine RH side (X), LH side is a fixed "0' point. Hopper Rail Feeding devices with capacity of approx 48 Work Pieces/Min. Separate drive for outfeed belt. Center Stock support. -- O

KOCKUMS chip conveyor. Drive section ONLY with 20 HP drive; approximately 14' long x 42" top of chain to base x 32" deep; formed trough; 3 7/16" drive shaft and bearings. No tail section. WD120 chain. $5,500 OBO.

Includes hydraulic pump unit. Forano floating infeed available also

Kockums L&B 7’ Late Model High Air Strain Right Hand Bandmill Headrig S/N 8853. 44,000 lbs max saw strain. 11” wide wheels have heavy rims with 1-3/16” on edge of top wheel and 1-3/4" on bottom and both mounted on non-rotating arbors. Hydraulic positioned upper guide and motorized wheel lift. Cartridge pressure saw guides. Includes tilt-back upper wheel guard. Saw length is 43’-6”. Bandmill is the heaviest most productive unit built and weighs 31,000 lbs. Maximum depth of cut under upper guide at highest position is 53”. Additional capacity can be achieved with an optional column riser. Currently sitting on 17degree removeable tilted base. Max fall down is 45-1/4”. New powered clearing belt for slab removal. This is one of the best 7’ Bandmills we have seen and is capable of carriage sawing speeds over 500 feet per minute. No motor. Current new price for this bandmill from USNR is approximately $750,000. We are offering this unit for a fraction of that price, FOB, Portland, OR. Inventory No. 12500. Price, As-Is, Cleaned and Painted FOB Portland, OR ------------ $89,500.

Kockums KS28 8' x 8' Chip Screen S/N 687, Needs a cleaning, out and ready to Ship.

Kockums 6' Band Mill Air Strain 9" Wide Wheels

Kockums/Cancar 24" Ring Debarker S/N 84196

Kodiak 27" Ring Debarker

Koehring lateral tilt Hotsaw head-good disk and saw motor. Set up to go on. A Timbco, but could easily be set up to go on a John Deere or timber jack

Several parts for 20" Koehring sawheads

Koger 60 Suction Blower W/100HP Motor.

Koger Sawdust Blower W/75HP Electric Motor & Reduced Voltage Starter.

Koger Material Blower with 100HP S/N KAF-4509 26" Inlet 50" Dia. Fan Blade

Reconditioned Koger rotary valves for low pressure applications. Call for pricing.

Used Koger 20” Flex Tip Rotary Valve, 2HP Drive, GOOD CONDITION, $3,000

14@ x 16” inlet 16” Round inlet no motor

Koger-Air,14" dia inlet/outlet, electric drive, very good condition

KOGER 12" AIR LOCK MDL 12-2-032 S/N 4319

Kohler Fast Response 50 with John Deere Diesel Engine 1544 Hours

KOHLER - 20REOZJB, ...Diesel GeneratorSpecifications: Rated at 23 - 30 KVA when used as primary; 25-34 KVA as standby.90 - 600 V, 3-Phase, 60 Hz. -- Brushless; rotating field Generator has broad range capability(176) Total operating hours running time.