Mellott For Sale

(2) McConnell 40-50 MM BTU Gas Burners available

12x42 Triple Pass Drum Sawdust Burner Controls Cyclone Pipiing Blower

MEC 12'x42' Triple Pass Drum Trunions Cyclone available

MEC 10x40 Single Pass Drum Trunions Controls

MEC Drum Drying System. Includes 30MM BTU Webb Burner, Airlock, and 250 HP I.D. Fan. Suitable for a large pellet mill, shavings operation, or other drying needs.

MLS Number 13567192 Mercodor Industrial Shredder Just under 2 hours of use Shredder with base Outfeed conveyor with permanent magnet belt 2 x 20Hp 480 volt/60Hz Knives 20 mm 5 hooks Machine opening 1200 mmx 600mm Can process trim ends, sawdust and plastic Machine is still set so we may process wood or plastic for samples if required.

MOLLERS HSA Automatic Stretch Hooding SystemSpecifications: -- Max. pallet size: 48" x 48" x 120" -- Capacity: up to 120 units per hour (depending on load height and length) -- Main motor: 2 HPFeatures: -- Fully automatic -- Tubular film is automatically fed and stretched over the load -- Handles a variety of load heights automatically

MOLLERS HSA Automatic Stretch Hooding System with Corner Board ApplicatorSpecifications: -- Max. pallet size: 48" x 48" x 120" -- Capacity: up to 120 units per hour (depending on load height and length) -- Main motor: 5 HP -- Corner board system: -- Automates the process of placing 4 corner boards. -- Each corner board magazine can hold up to 30 corner boards. -- Carousel design, servo driven corner board applicator allows for precise positioning during corner board retrieval and for proper staging.Features: -- Fully automatic -- Tubular film is automatically fed and stretched over the load -- Handles a variety of load heights automaticallyApplications include: -- Pallets of smooth boxes or uneven containers that need to be secured on a pallet -- Cereal / grain based products -- Chemical / industrial -- Prepared / convenience foods -- Household goods -- Snack foods

Jacobson Swing Hammer Mill, Top Infeed, Bottom Discharge, 75HP Electric Motor.

Montgomery Blo Hog S/N 781 ER18" HDGM Drop Feed w/75HP Motor

In good condition. Has 50” opening. No drive motor but would take 100-200HP depending on material being run. No screen included. Very heavy weighs approximately 4 ton.

MONTGOMERY BLO-HOG Top-Feed Wood GrinderSpecifications: -- 13" x 18-1/2" Top feed opening; 75 HP direct drive motor at 1,200 RPM. -- Unique cutting action involving stationary anvils positioned on the side of the machine with rotating teeth (hammers) that pass through rectangular pockets formed by these anvils. -- This positive cutting action between the teeth and anvils performs what amounts to the first particle-sizing function in a two stage process. -- The second sizing action occurs when the material cut by the action of the teeth against the anvils is directed downward and across a curved particle-sizing screen which fits underneath the rotating element. -- The machine is mounted on a elevated base providing ample room for discharge. -- Actual model is ER 18S315FHDL.

2006 Morbark 6600 HG Rebuilt CAT 1000 Hp engine Approx 2100 hours Magnet Great for processing pallets, brush, green waste & more

Mobark 1400 Tub Grinder, used for municipal waste only, in very good condition, turn key operation. $120,000

2007 Morbark 950 Tub Grinder -3000 hours -CAT 3056EATTAC engine (172hp) -Ready to work -Videos available upon request

1992 Morbark 1200 Tub Grinder -10500 hours - 1200 cat 3412 twin turbo 650hp -Mill completely rebuilt and new bearings with 200 hours on it ($33k in repairs) -Replaced turbo pedestal and rebuilt turbos -Entire mill was replaced new with new bearings -Hours are a guess meter says under 1000 I believe so I’m guessing it rolled -Hydraulic cylinders were rebuilt on boom except for squeeze cylinder on grapple -The turn motor on grapple leaks a little -One of the stiff leg cylinders bleeds down for unhooking from truck Ready to grind

2014 Morbark 1200XL-WCL -7571 hours -CAT C27, 875 HP -Cab Loader Option -New Floor -Spare Rotor, Screens, Tips, and Parts Package -Turn Key Ready to Grind

1998 Morbark 1300 Tub Grinder -9000 hours meter doesnt work but has original ecm can read it -Loader -Few minor leaks -Mill in great shape -Augers are freshly hard faced -Belts in good shape -New injectors -Comes with an extra set of new hammers and tub rollers -A/c blows ice cold

1993 Morbark Model 1200 Tub Grinder, Equipped with a Cummins 650 HP Engine, Autofeed, Wireless Control, New Clutch 1 year ago, Hours are Unknown, New Turbo, New Injectors 300 Hours ago, Ready to Work. Weight 55,622 lb Length 38.15 ft Width 11.9 ft Height 12.8 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 Morbark 1300B Track -10,400 hours -C27 No Blow by -One owner machine -Uc is in good condition -Had recent mill work completed Ready to Grind !!!!!!