Meadows Mills For Sale

KOCH SPRINT-PLUS/I CNC BORE, GLUE & DOWEL INSERTERSpecifications: -- For horizontal end drilling, gluing, & dowelling into stock ends (left-hand & right-hand sides); horizontal edge drilling; vertical face drilling from below. -- Table size: 20"; x 51"; x 35-1/2"; H; (2) 23-3/4"; W Working fields. -- X-Axis range (CNC): 1,200 (47") with (1) working field; 600 mm (23-1/2") with (2) working fields. -- Y-Axis adjustment range (manual): 0 - 50 mm (0" - 1.97"). -- Dowel diameter 8 mm (0.31").Equipped with: -- (4) 12"; L Pneumatic clamps. -- Horizontal drilling unit. -- Glue & dowel insertion unit. -- Vertical drilling unit from below, programmable along entire length of worktable (X-Axis). -- Manual table adjustment with: Adjustable support rail for movable & removable support elements for vertical drilling from below at any position required and for narrow parts & rails. -- 26"; Dia. x 7"; D vibratory bowl feeder. -- GRACO "HUSKY 307" 7 GPM 100 PSI air-operated diaphragm pump with Stall-free low pulsation air valve. -- PC Based CNC Control, with 12" display. -- Emergency stop device.Dimensions without Vibratory Bowl Feeder: 125" x 78" x 84" H.

Kockums L&B 7’ Late Model High Air Strain Right Hand Bandmill Headrig S/N 8853. 44,000 lbs max saw strain. 11” wide wheels have heavy rims with 1-3/16” on edge of top wheel and 1-3/4" on bottom and both mounted on non-rotating arbors. Hydraulic positioned upper guide and motorized wheel lift. Cartridge pressure saw guides. Includes tilt-back upper wheel guard. Saw length is 43’-6”. Bandmill is the heaviest most productive unit built and weighs 31,000 lbs. Maximum depth of cut under upper guide at highest position is 53”. Additional capacity can be achieved with an optional column riser. Currently sitting on 17degree removeable tilted base. Max fall down is 45-1/4”. New powered clearing belt for slab removal. This is one of the best 7’ Bandmills we have seen and is capable of carriage sawing speeds over 500 feet per minute. No motor. Current new price for this bandmill from USNR is approximately $750,000. We are offering this unit for a fraction of that price, FOB, Portland, OR. Inventory No. 12500. Price, As-Is, Cleaned and Painted FOB Portland, OR ------------ $89,500.

Kockums KS28 8' x 8' Chip Screen S/N 687, Needs a cleaning, out and ready to Ship.

KOCKUMS chip conveyor. Drive section ONLY with 20 HP drive; approximately 14' long x 42" top of chain to base x 32" deep; formed trough; 3 7/16" drive shaft and bearings. No tail section. WD120 chain. $5,500 OBO.

Kockums/Cancar 24" Ring Debarker S/N 84196

Kockums 6' Band Mill Air Strain 9" Wide Wheels

Includes hydraulic pump unit. Forano floating infeed available also

Kodiak 27" Ring Debarker

Koehring lateral tilt Hotsaw head-good disk and saw motor. Set up to go on. A Timbco, but could easily be set up to go on a John Deere or timber jack

Several parts for 20" Koehring sawheads

KOGER 12" AIR LOCK MDL 12-2-032 S/N 4319

Koger 60 Suction Blower W/100HP Motor.

Koger Sawdust Blower W/75HP Electric Motor & Reduced Voltage Starter.

Used Koger 20” Flex Tip Rotary Valve, 2HP Drive, GOOD CONDITION, $3,000

Reconditioned Koger rotary valves for low pressure applications. Call for pricing.

Koger Material Blower with 100HP S/N KAF-4509 26" Inlet 50" Dia. Fan Blade

14@ x 16” inlet 16” Round inlet no motor

Koger-Air,14" dia inlet/outlet, electric drive, very good condition

Kohler Fast Response 50 with John Deere Diesel Engine 1544 Hours

KOHLER - 20REOZJB, ...Diesel GeneratorSpecifications: Rated at 23 - 30 KVA when used as primary; 25-34 KVA as standby.90 - 600 V, 3-Phase, 60 Hz. -- Brushless; rotating field Generator has broad range capability(176) Total operating hours running time.