Meadows Mills For Sale

JLT CLAMPS 78H-12-42-40 Mini Pod PressSingle section 12" wide x 42" long cap., 40" max. opening, 13" daylight, 30 ton max.,clamping pressure at 120 PSI, Pod Press is powered by a total of (18) 20 square inch diaphragm cylinders, upper platen has a 2" stroke when air is activated.Features: Heavy duty upper and lower steel platens, single lever valve pneumatic operation with dial regulator pressure controls, stack multiple wood components up to 12" wide and ships pre-assembled. Includes: Manual jack for platen adjustment.

JLT Clamps 302-40-H-R DOOR AND PANEL CLAMP40" Capcity clamp (min 8-1/2") Patented Equalizer Design Provides Equal Clamping from the Front and Rear Jaws, Resulting in a Higher Quality Panel. #302 Style Clamp with Standard 3-1/2" High Jaws for Increased Durability and Less Clamps Per Glue Up.Also available with 36", 44" and 52" capacities.

JLT CLAMPS - 79X-5-DM: Dual Station Miter Door Pro5-Section rotating Clamp; 26" x 42" max. cap.; 4" x 12" min. cap.; 2-1/2" max. thickness capacity. -- (2) Horizontal & (2) Vertical Clamps for: Applying pressure to Mitered Doors. -- Recommended for miter and stile & rail doors. -- 1-Lever operation; clamp & square a door in (2) seconds; 500 Lbs of clamping force per cylinder; machine rotates counterclockwise for safety.

42” Capacity Pneumatic operation

PVC Pipe C900, 16 inch - 20ft, 16 DR 18 EB, (un-used) Made by: JM Eagle 50, 20ft pieces available Contact us for a price including freight Additional photos coming soon Product # 248831 PVC 235 PSI DR18, 16” x 20ft C900 – 16BL MFG. Date: 10/27/22

Jocar MDL 1600-23063 Horizontal Resaw System w/125HP Motor, 40' Outfeed Rollcase, Infeed Power Pack, Tipple System, Infeed Rollcase, Cant Positioner, Cant Turner, 20HP Hyd Power Pack, 50HP Power Pack System, Cleereman 5' x 6' Control Cab & Computer Setworks.

MUST BE ORDERED FROM FACTORY. VERTICAL ARBOR SLAB RECOVERY GANGS are designed to process 3 sided slabs into pallet boards. Ten (10) vertical, interior feed rolls are standard. Variable speed feed system up to 175 FPM. 2" automatic cant variance allows both 3 1/2" and 5 1/2" wide cants to be run back to back with no operator involvement or machine adjustments. Machine utilizes one bottom "clean-up" saw to eliminate irregular shaped pieces assuring flat, square pallet boards. 30" to 60" lengths. Can be partnered with a slab edger and trimmer to recover boards with NO operators. PRICES RANGE FROM $185,000 to $215,000 depending on the model and options.

JOCAR BAND SAW: Model 1600/230; very heavy duty rectangular tubing column;  63" diameter wheels with wheel guards; right hand machine;  vertical sawing; 9" face width; kerf approximately .125"; pressure guides;  complete with 125 HP electric motor, drive and guard; hydraulic strain; top wheel tilt and hydraulic power unit.  Price includes loading onto your truck. PRICE $35,000.00. 

7" Wide Band, 19" Bed Width, Approx 48" Dia Band Wheels, Stacked Cylinder Setwork. Includes Hydraulic Unit, 3 Strand Transfer Deck, In-feed Roll-Case With Cant Turner, Out-feed roll-case, Out-feed Cant Deck-Dead Roll, Saw Cab. For Resaw Only- $50,000.

Grinder for edgers

Cuts with a 16" carbide tipped saw blade 240V/480V 3 phase 7-10 seconds per cycle

2015 Deere 624K Wheel Loader, One Owner Municipal Trade In, Very Low 3042 Hours, Hydraulic Coupler, Aux Hydraulics. Clean Machine Inside and Out. Loader has 4 in 1 Bucket that comes with it.

John Deere 540B Skidder Single arch Winch Rebuilt engine about 700 hours ago 28Ls Runs and operates good

2018 John Deere 853M -7200 hours -22in JD 360 degree head -Tight and dry -Uc is good Ready to work!!!

2016 John Deere 1010E Forwarder, 10,036 hrs., $149,900

2004 John Deere 540G3 -One Owner -Tight and dry machine -23.1.26 new tires -Winch and cable are good -Everything works as it should More Pictures Coming Soon!!!!

2010 John Deere 648H -10638 hours -Engine was replaced at 5k hours -30.5 Tires -Little slack in center not bad -Winch works -Dry -Everything works as it should

2011 John Deere 540G3 -9252 hours (alot are idle hours) -Bump shifter -Center tight and dry -Drive shafts done -Tons of service records in pictures -Winch 4000s -New seat coming before sale -Clean skidder ready to work

2020 John Deere 650K LGP, Enclosed Cab, Heat/Air, 2100 Hours

2005 John Deere 1110D Forwarder Engine rebuilt by Deere 6k hours ago New center pins, bushings, and bearings by Deere New grapple Repacked all cylinders New AC system Heat Good tranny Good rubber 25,373 hours Runs and operates great Nice straight machine Currently on job daily