Equipment For Sale

Morgan deduster, 6" wide capacity, electric drive, excellent condition

Morgan Scragg Mill SN: 041200116 Mill is in great operating shape with no issues All electriclal panels and hydraulic pump are included Blower and log deck also available Call for full details

Bottom Cut Morgan Band Resaw Seller will load on truck call 931-797-6284

Morgan Scragg Deck 3’ x 21’6” scragg deck Heavy 4 x 8 tubing frame Avg 48” tall Motor and drive Heavy built, low usage, ready to load

Morgan 2 Head Resaw 12 x 12 Grade 480 Volt 3 Phase with 50HP Motors, On board HPU. 4" Bands.

Morgan In Line Deduster S/N 061495037

Morgan In Line Deduster

MORGAN "3-Head" Multi Blade trim saw: -- Equiped with:(3) 10 HP motors, 10'capacity 5'6" thick with Disconnects & Controls

Morgan single head resaw with return belt, electric drive, very good condition and ready to work. Has 3 phase 460 volt plugs.

01-353 | BPQ-0 | 480v

Morgan Scragg. Located in ID. #C963

Morgan 2Saw 16' Trimsaw Line. With in-feed Coveyors. Located in GA. #C959

Morgan Notcher, can take 8ft boards, 10HP 240V single phase, fully tested and ready to go.

MIC (Morris Industrial) Bar Type Unscrambler. No drive. Very nice. Length: 22' 1"; Width: 11' 3"; Height: 8' 2"

MOTIMAC - FR650: 5-Head Abrasive Brush Sander with (3) Top & (2) Side Heads -- Specifications:(2) Side heads & (3) Tops Heads • Side heads able to sand in multiple angles • Independent height adjustment on all hubs • Independent operation of each hub • SIEMENS Electronic controls • Capable of sanding flat or profiled surfaces • 25"; Working Width • Side heads adjust to sand from 2"; wide to 25"; wide pieces. -- Working Capacity:Max. sanding width: 25“; min. working length: 21-1/2"; for edge sanding rollers & 15"; for horizontal rollers. -- Working height: 0.12"; - 4";; variable feed speed: 10 - 55 FPM (3 - 17 MPM). -- (2) 100 - 450 RPM Side heads at 3/4 HP ea. & (3) 60 - 450 RPM Top heads at 4 HP. Total Power: 15-1/2 HP (11.5 kW).

Motoman Robot Refurbished a few years ago. In good working condition.

MPB Series - III End Matcher. --Random length End Matcher with: 40 mm Dia., 7,200 RPM spindles, powered by(2) 5 HP motors.Specifications: --10" (250 mm) Min. length x unlimited length. --÷2-3/8" (60 mm) - 10" (250 mm) Width cap.; 1/4" (6 mm) to 1-3/8" (35 mm) thickness capacity. --÷ 2HP Feed motor with: 295 FPM (90 MPM) via (5) top powered rolls & (5) bottom idle bedrolls. --÷Processing speed based on 6' average length; incoming boards are 78 FPM (24 MPM). Stock held securely for accurate profiling during the machining cycle by top and side clamps. --÷ 24 Volt DC machine; control from the panel and automatic operation via included PLC. --÷Includes: 9' Canted powered infeed roll conveyor; outfeed with an outfeed system including a material slide & landing section. -- 12 HP Total connected load.Features: -- MPB is an automatic & versatile "linear feed" flooring End Matcher; compact design retains the ability to end match long and wide boards with speed and accuracy.÷LC controlled twin cutters and dual action clamping system produce a square cut. -- Machine tongue & groove with or without Vs on flooring and panel product; designed to be used for finger joint cutting. -- Heavy-Duty self-supporting mainframe; compact design requires minimum floor space; capable of processing material as short as 11" to an unlimited length. --Variable speed thru-feed system is controlled by frequency inverter; thru-feed system allows the tongue to be cut simultaneously on the tail of one board and the leading edge of the next board. -- Touchscreen Control is used to quickly activate and adjust the machine functions; powered top urethane feed rolls and spring-loaded bed rollers feed the material into position for processing; pneumatic side pressure system ensures the material is held square against the fence; with safety and noise reduction enclosure.

ME R80 14" Radial Arm Saw

MSI - AT-643: Horizontal Auto-Tie Baler with Infeed ConveyorSpecifications: -- 60" x 43" Feed opening. -- Bale size: Variable x 43" x 30". -- Bale weight: 900 - 1,700 Pounds; OCC" 5 TPH. -- Cylinder: 7"; repacked. -- Motor: 40 HP. -- New hydraulic pumps; new "T-1" Liners on floor & platen. -- 60" Wide x 25 feet long slider bed; conveyor included.