LHI Gang Saw For Sale

Gang Saw 

Air Compressor (107) Airlock (19) Band Chopper (1) Band Mill Thin Kerf (22) Band Mills (Wide) (24) Banding-Strapping Machines (81) Blowers and Fans (111) Boiler (13) Bolter Saw (1) Carriage (Sawmill) (41) Carriage Drive (Sawmill) (37) Chip Bin (15) Chip Cyclone (5) Chip Screen (28) Chipping Canter (1) Chop Saw (29) Circular Saw Husk (9) Circular Sawmill (63) Conveyor (57) Conveyor-Auger (4) Conveyor-Live Floor (5) Conveyor-Run-Around (1) Conveyor-Vibrating (76) Conveyors Belt (182) Conveyors Board Dealing (61) Conveyors Decks (Log Lumber) (197) Conveyors General (27) Conveyors-Barn Sweep (16) Conveyors-Live Roll (128) Debarker (51) Dip Tank (5) Drum Dryer (13) Dry Kiln (12) Dump Hopper (12) Dust Collection System (209) Edger Tailing Device (2) Edgers-Board (56) Edgers-Gang (36) Edgers-Slab (2) Edgers-Vertical (5) Electrical (106) Forklift (48) Gang Rip Saw (31) Gang Saw (36) GenSet (54) Hammer Mill (3) Hogs and Wood Grinders (139) Hydraulic Power Pack (66) Knife Grinder (27) Laser Lights (5) Log Home Machinery (2) Log Irrigation (2) Log Merchandising System (13) Log Turner (Sawmill) (24) Lumber Stacker (27) Lumber Sticker (2) Metal Detector (19) Misc (61) Operator Cab (8) Package Saw (5) Portable Sawmill (25) Post and Pole Peeler (20) Power Units-Engines (14) Radial Arm Saw (2) Resaw-Band (133) Resaw-Circular (2) Scissor Lift (36) Scragg Mill (29) Screening System (1) Setworks-Sawmill (4) Shaper (5) Sharpening Equipment (94) Shavings Bagger (5) Shavings Mill (28) Slab Saw (3) Stake Pointer (2) Stave Quartering Saw (1) Tie Processing (3) Trimmer (72) Unscrambler (32) Wheel Loader (63) Wood Chipper - Stationary (111) Wrap and Packaging (10)

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 1
7 Results Found
Sort By 
Recently Added Items
2018 Ligna
$210
2018 Ligna
STANDARD LISTINGS
2015 LHI DOUBLE  Gang Saw
$23,500

LAUDERDALE-HAMILTON DOUBLE TRIM SAW: -- Specifications:Minimum distance between the saws 60" (1,524 mm), maximum distance between the saws 109" (2,768 mm);Panels are fed into (2) 5 HP (3.7 kW) Saw motors with 10" (254 mm) dia. saw blades.The output of the saw is approx 600 parts per hour. -- Feed Speed;The standard link feed chain speed is approx 120 FPM (37 MPM) per cycle;The chain stops at the end of each cycle which requires the operator to push the "go" button to start a new cycle each time. -- Saw Adjustments:LH Saw is fix & the RH saw is motorized & moves along precision round guideways to assure for accurate placement.The system allows you to cut approx 6" (152 mm) off the adjustable RH side if the machine;The fixed LH side of the machine is designed for just a squaring dust cut but you can also take off up to 6" (152 mm) if needed. -- Complete with:Powered scrap conveyor on RH (operator) side; machine risers; (2) operating platform; powered in-feed & out-feed conveyors; (2) scissor lifts. remote pendent & emergency stops at the in-feed & out-feed side of the machine.

Bob Bullin
800-374-5009 ext:346
Call

2019 LHI RFPR 72/12 HEAVY DUTY  Gang Saw
$48,125

LAUDERDALE-HAMILTON RFPR 72/12 "HEAVY DUTY" MULTI-BLADE PANEL SAWSpecifications -- (1) 50 HP main arbor motor for 1/8" min. - 2" max. material thickness; 12" Dia max. blade capacity with 1.25" minimum spacing between the blades; Minimum panel length 30" & 72" of usable width cutting capacity. -- 3-15/16" Dia. arbor with 1-15/16" FAFNIR arbor bearings; positive powered steel contact feed rollers with (8) Polyurethane drive rollers; variable feed speed to max 80 FPM. -- (1) "Quick Change" arbor cart trolley and blade box for 9 1/2" cutsOn average this machine will cut a bundle (42 sheets) of 3/4" Plywood. LVL, PB, MDF or OSB into narrow strips in 4 minutes or less.Available Options: -- Blade Box Arbor Cart and Trolley $ 12,590.00 each -- Arbor Carts modifications to accept 12" dia. blades $ 700.00 each -- Single Point Height Adjustment $ 6,000.00 each -- "Quick Change" set up kit (includes belt guide, belt tensioner, and hydraulic arbor lock) $ 3,695.00 each -- Tandem 8000# capacity infeed Scissors Lift, 2 HP, 3 Phase, 230/460 Volt, 31" x 192" platform and cross bars for fork truck entry $ 14,495.00 each -- Tandem 8000# capacity outfeed Scissors Lift, 2 HP, 3 Phase, 230/460 Volt with 48" x 192" platform and beveled crossbars for fork truck entry and auto down indexing $ 16,390.00 eachTooling Cost: -- Carbide Tip Blades 12" x 40T x 4 3/16 bore with TCG and 3 pin holes $ 125.00 each -- Saw Blade Tooling Collars $ 125.00 each -- Actual Model is LAUDERDALE-HAMILTON RFPR "HEAVY DUTY" 12 Panel Rip Saw

Bob Bullin
800-374-5009 ext:346
Call

2019 LHI 96 X 60  Gang Saw
$208,000

LAUDERDALE-HAMILTON 96" x 60" ANGULAR TYPE RIP & CROSS-CUT SYSTEM: -- Specifications:Automatic Angular Rip & Crosscut 5-Position System; max. panel size of 8' (96") long x 5' (60") wide x 1" - 4" thick; 1.25" minimum spacing between the blades; variable feed speed from 0 - 150 FPM. This system will process a unit of material in approx. (7) Min. -- Pos. # 1: LHI Automatic Staging/Infeed/Transfer & Panel Rake Feeding System: 10' (120") Long, powered 3-chain staging conveyor; (2) units can be preloaded while (1) unit is in process. Automatic up-indexing 4,500 Lbs capacity Scissors Lift with auto. rake infeed system; infeed rake system designed with a thin material device that can automatically load material as thin a 1/8". -- Pos. # 2: LHI "72": 72" Arbor length designed for panels up to max. of 5' (60") wide, min. panel length 30"; 40 HP main arbor motor; 1/8" min. - 1" max. material thickness with no adjustment needed over a 3/8" thickness variation. 2-3/4" Dia. arbor with 1-15/16" "Fafnir" arbor bearings; positive non-marking steel contact feed rollers with (optional) poly-covering, driven from top & bottom. Includes: (6) blade collars; (2) 6" dia. vertical dust outlets with an easy access strip separator box. -- Pos. # 3: LHI Cross-Transfer System: Transfer conveyor with panel holddown & chain drive system to change direction 90° & automatically feed LHI 102". -- Pos. # 4: LHI "102": 102" Arbor length designed for panels up to max. 8' (96") long; 30 HP main arbor motor; 1/8" min. - 1" max. material thickness with no adjustment needed over a 3/8" thickness variation; 2-3/4" dia. arbor with 1-15/16" "Fafnir" arbor bearings. Positive non-marking steel contact feed rollers with (optional) poly-covering, driven from top & bottom. Includes: (6) blade collars; (2) 6" dia vertical dust outlets with an easy access strip separator box. -- Pos. # 5: LHI Stacking & Outfeed Transfer System: Auto. down-indexing 4,500 Lbs cap. Scissor Lift; (4) adjustable alignment posts & (4) bin separators to keep processed stacks square. 98' (96") Long outfeed gravity conveyor.Operating System: -- (1) LHI ALLEN-BRADLEY "Inter-Link" PLC for simple single-operator management of the entire system from (1) central control.

 SOUTH, AL
EX-FACTORY INC.
704-841-2001
Call

2019 LHI RFPR 72/10  Gang Saw
$36,800

LAUDERDALE-HAMILTON RFPR-72/10 MULTI-BLADE PANEL SAW: -- Specifications:40 HP main arbor motor; 1/8" min. - 1-1/4" max. material thickness; 10" dia blade with 1.25" minimum spacing between the blades; 3-15/16" dia. arbor with 72" of usable width cutting capacity, min. panel length 30"; 1-15/16" FAFNIR arbor bearings; positive powered steel contact feed rollers; fixed feed speed of 80 FPM. -- Blades & collars:Thin kerf 10" dia x 40-tooth x 4.18" bore non-split blades with quick & easy setup for fast blade positioning/removal (blades not included). -- Blades & collars are sold separately & not included in the machine price; 10" dia. x 40-tooth thin kerf blades, please add ...$ 100 ea.;1.25" wide x 4.18" bore blade collars, add ...$ 125 each. -- Complete with:(2) 4" dia dust collection ports on top and (1) 8" dust collection port on bottom. Total recommended 2,200 CFM -- Actual Model is LHI RFPR-72/10 Roll Feed Panel Saw. -- Available Options at additional cost:110 V Infeed Scissor Lift with foot pedal controls or automatic up-indexing; 110 V Outfeed Scissor Lift with automatic down-indexing;Assortment of blade thicknesses & diameters; Split blade & collar system; -- Additional Options Depending on application:Main motor power from 30 - 75 HP; 4" Max. cutting height (requires 75 HP motor);Variable feed speed; Non-marking Polyurethane contact feed rollers;Additional arbors; "QUICK CHANGE" arbor system (see video);"Pigtail" quick change Crosscut Saw System.Many more tooling & configuration options available upon requestThis machine will cut a bundle (42 sheets) of 3/4" Plywood. PB, MDF or OSB into narrow strips in 4 minutes or less.

Bob Bullin
800-374-5009 ext:346
Call

2019 LHI RFPR 102/10  Gang Saw
Call for Price

LAUDERDALE-HAMILTON RFPR 72/10 MULTI-BLADE PANEL SAW: -- Specifications:Simple Design, Low Cost, High Performance Just like our other equipment High Production… One person can rip a bundle in 3-1/2 minutes, Off-The-Shelf Parts So you can keep it running years from now For custom order with the following available options & features. ( and ). -- Available Options:30HP to 75HP 230V/460V/3PH Saw motor -- Standard arbor size is 3-15/16" diameter x 72" long with 1-15/16" precision bearings. Special arbor lengths available up to 108". -- 8 Steel feed rollers are driven top and bottom, giving positive, non-marking feed and long roller life (optional polyurethane rollers are available) -- Fixed feed speeds from 20-150fpm. 79fpm standard. Variable speed feed is available. -- Uses 10" diameter 4-3/16" bore blades. -- Rip 1/8" to 1-1/4" thick with 10" diameter blades. (Custom builds available with 12" and 14" diameter blades allow ripping of material up to 3-3/4" thick. -- Foot print: 40" x 96"; Working height: 47-1/4"; Dust ports: 4"(2x), 8"(1x) -- Blades mount to arbor using precision collars which allow setup changes of 10-15minutes. -- Optional: Arbor change out carts allow setup changes in 4 minutes -- In-feed & Out-feed Stations -- Pig Tail Cross-Cut Saw -- Available Tooling:Blades & collars are sold separately & not included in the machine price; -- 10" dia x 4-3/16" bore 40 Tooth thin kerf blades = $100 ea., -- 1-1/4" wide x 4-3/16" bore blade collars = $120 ea. -- This machine will cut a bundle (42 sheets) of 3/4" plywood. PB, MDF or OSB into narrow strips in 4 minutes or less. -- Actual Model is LAUDERDALE-HAMILTON RFPR 72/10 Roll Feed Panel Saw.

Bob Bullin
800-374-5009 ext:346
Call

2019 LHI RFPR 102/10  Gang Saw
$49,800

LAUDERDALE-HAMILTON RFPR 102/10 MULTI-BLADE PANEL SAW: -- Specifications:(1) 40 HP main arbor motor for 1/8" min. - 4-1/4" max. material thickness; 12" Dia max. blade capacity; 1.25" minimum spacing between the blades; Minimum panel length 30" & 72" of usable width cutting capacity. -- 3-15/16" Dia. arbor with 1-15/16" FAFNIR arbor bearings; positive powered steel contact feed rollers with (8) Polyurethane drive rollers; fixed feed speed of 80 FPM. -- Includes (6) arbor collars - blades not included. -- Complete with: (2) 4" dia dust collection ports on top and (1) 8" dust collection port on bottom. Total recommended 2,200 CFM.On average this machine will cut a bundle (42 sheets) of 3/4" Plywood. LVL, PB, MDF or OSB into narrow strips in 4 minutes or less.Available Options: -- Blade Box Arbor Cart and Trolley $ 12,590.00 each -- Arbor Carts modifications to accept 12" dia. blades $ 700.00 each -- Single Point Height Adjustment $ 6,000.00 each -- "Quick Change" set up kit (includes belt guide, belt tensioner, and hydraulic arbor lock) $ 3,695.00 each -- Tandem 8000# capacity infeed Scissors Lift, 2 HP, 3 Phase, 230/460 Volt, 31" x 192" platform and cross bars for fork truck entry $ 14,495.00 each -- Tandem 8000# capacity outfeed Scissors Lift, 2 HP, 3 Phase, 230/460 Volt with 48" x 192" platform and beveled crossbars for fork truck entry and auto down indexing $ 16,390.00 each -- Drag Chain Feeder Conveyor - Roller conveyor transfers sheets to in-feed of saw and dog chains align and start the sheets into the saw feed rolls. Recommended with 102" wide machines, $ 18,800 Tooling Cost: -- Carbide Tip Blades 10" dia. x 40-tooth thin kerf blades $ 125.00 each -- Saw Blade Tooling Collars $ 125.00 eachThis machine will cut a bundle (42 sheets) of 3/4" Plywood. PB, MDF or OSB into narrow strips in 4 minutes or less.Actual Model is LAUDERDALE-HAMILTON RFPR 102/10

 SOUTH, AL
EX-FACTORY INC.
704-841-2001
Call

2019 LHI RFPR 72/16 HEAVY DUTY  Gang Saw
Call for Price

LAUDERDALE-HAMILTON RFPR-72/16 "HEAVY DUTY" MULTI-BLADE PANEL SAW -- Specifications (1) 30 HP Main arbor motor for 1" min. - 5" max. material thickness;16" Dia max. blade capacity with 1.25" minimum spacing between the blades;Minimum panel length 30" with 72" of usable width cutting capacity.3-3/4" Dia. arbor with 1-15/16" FAFNIR arbor bearings;Positive powered steel contact feed rollers with (8) adjustable Polyurethane drive rollers;Variable feed speed to max 80 FPM. -- Requested GAF Options Include:Single point height adjustment for materials from 1" to 5" thickness using customer supplied 16" dia blades(note: Ripping widths can never be less than one-half the material thickness).(1) "Quick Change" arbor cart trolley and blade box for QC set ups.(12) Saw collars to attach the customer supplied 16" dia. diamond blades to the arbors(1) In-feed Scissors Lift with auto cycle controls(1) In-feed 6' conveyor with alignment fence and powered assist feed(1) Auto sheet feeder with auto cycle controls(1) Out-feed Scissors Lift with 4 x 8 roller top -- Actual Model is LAUDERDALE-HAMILTON RFPR 72/16 HEAVY DUTY MULTI-BLADE PANEL SAW -- Available at additional cost:Installation technical assistance for $125/hr. plus travel time and expenses, payable upon competition of services. -- NOTE:Quote is valid for 30-days;Quoted price is FOB, Shannon, MS;Customer is responsible for off-rigging cost at their facility;Customer is responsible for spotting the machine to its final resting place with adequate floor foundationCustomer is responsible for adequate electric, air & dust control supply upon technician's request:Warranty: 1-yr mechanical parts (electrical controls excluded);Delivery to Customer's facility is approx 17 weeks from receipt of funds;Quote assumes customer will deliver material for testing & run-off procedures (if required);

Bob Bullin
800-374-5009 ext:346
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2019 LumbermenOnline.com - All Rights Reserved