Sawmill Equipment For Sale

Baker Band Resaw Return conveyer 480 volt 3 phase 6" x 12" capacity

Baker single head resaw, Model; BBR-O, Serial#; 04-3371, has tilting infeed belt w/ digital display, electric drive, includes spare parts/ blades, excellent condition

Baker C Resaw with Return. Located in NY. #C929

Baker Dominator 3650E Sawmill Edmiston Edger Morbark Chipper with diesel engine All decks and rollers

Baker Products’ Self-Dumping Steel Hoppers can be used to collect almost anything. It has a reinforced base and continuous weld. When the hopper is full, you can easily pick it up with almost any forklift and dump it simply by pulling a lever. It has a lock, so the load will not dump by mistake. The Baker Self-Dumping Steel Hopper is a convenience every company should have. A. 2 yd (1,828 mm) 603 lbs. (274 kg) B. 2 yds (1,828 mm) 805 lbs. (365 kg) C. 3 yds (2,743 mm) 971 lbs. (440 kg) A. 44” (111.8 cm) 59” (150 cm) 69½” (176.5 cm) B. 45½” (115.6 cm) 57½” (146 cm) 64½” (163.8 cm) C. 55” (139.7 cm) 58” (147.3 cm) 71” (180.3 cm) Forklift Opening: 2½” (6.4 cm) high by 48½” (123.2 cm) wide

Baker Mill Like NEW

BAKER Model 3640E Blue Streak Electric Sawmill Like New BAKER Model 3640E Blue Streak Electric Sawmill S/N 07-570. 36” diameter log x 24ft. maximum length 40 HP main motor with 10 HP HPU wired for 460 volts, separate control panel on pedestal to turn the system on/off. Includes an Inline Debarker cutter that travels with the head while it travels down the log. Has the Trailer Package, and 10” wide x 12ft. Roller Conveyor Model BCS-O S/N 07-642 for the outfeed, with manual foot pedals kickers to send the boards to the right or the left, and includes lots of extra sawblades. Current new price over $100,000. This was built in 2007 but has had very little use and has been stored inside. See photos of on our web site. Inventory No.KF1.

BAKER Model ABX Horizontal Band Resaw Like New BAKER Model ABX Horizontal Band Resaw S/N 08-397. 12” wide x 12” high cutting capacity with 30 HP 460 volts main motor with build in HPU unit has the optional outfeed rubber conveyor roll down to run thin material, the tilting feature to run bevels with the Smart Tool digital readout, and it has 12” wide x 86” long belt conveyor on the Infeed run of the machines HPU it is stand alone. Machine is on casters so it is easy to move in & out of position, it also has Easy Quick Change Electrical plugs. Includes lots of extra sawblades. Machine was built in 2007 and has not been used and stored inside. Dimensions machine: Length 84" x width x 72 1/2" x height 68" Weight 2000 lbs., Current new price prox $29,000. See photos of on our web site. Inventory No. KF2 .

1993 Baker 4 Head Resaw Approx. 50 blades Size: 13' 2" x 1" x .035" x 1/2" Tooth Carbon Resaw Blade Saw 1 needs a new spindle. Hydraulic drive. New Main Breaker New Fuses A couple of Starters have been replaced. Approximately 6,240 Hours Baker 4 Head Resaw Specifications Guide System: Baker Low-Profile Flat Guide System with steel guide plates for enhanced precision. Saw Dust Outlet: Dimensions: 6"x6" (15.24 cm x 15.24 cm) square. Outlet Adapter: 90° adapter chute to a 4” (10.2 cm) diameter outlet. Rotation: Can be rotated for discharge in four directions. Recommended Airflow: 600 CFM (17 m³/min). Motors: Main Motors: 20 HP, 3-phase motor on each head. Inline Hydraulic Pump Motor: Cutting Capacity: 6" x 12" (15.24 cm x 30.48 cm). Feed System (3-Sided Feed Works): Rough-top belting for traction. Powered side feed rollers for smooth material handling. Non-powered hold-over wheels. Feed Speed: Fully variable, adjustable from 20 to 120 feet per minute (6 to 36 meters per minute). Delivery is available at the buyer’s expense

2 strand transfer deck, 28" wide x 14' long, #80 roller chain, no drive, good condition

Accepts material up to 12" x 12" and uses a 12"-wide conveyor Main Drive Motor: 30 HP TEFC Variable feed speed from 0-95 feet (0-29 m) per minute 28" Dynamically balanced solid metal band wheels 4" diameter dust outlet requires 500 CFM REDUCED LOW HOUR MILLWORK MACHINE

Model 3650E with Baker (3) Strand Infeed Deck Excellent condition Hydraulic over electric general factory networks. Hooked up to power and ready to be demonstrated.

Baker 2-Head Resaw 20 HP Motors Return Conveyor

Baker Furnace Dry Kiln 110volt 3 phase Excellent condition

Baker Furnace Dry Kiln 110volt 3 phase Excellent condition

12" capacity 25HP motor 460 volt 3-phase

Baker PAQ Resaw Good Working Condition

12" Baker BBR-O Single Head. 30hp Motor. Located in IA. #C968

1997 Baker 4 HD Resaw with Full Return

2010 Baker 2hd Resaw with return. #00901 More Photos Coming Soon!