• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
94 Results Found for Hogs and Wood Grinders Viewing 1 - 20 of 94 results
PREMIUM LISTINGS
Montgomery 50" Horizontal Hog, Good Condition, Working Daily $12,900 obo 859-556-3648
Equipment Location:Flemingsburg, KY
859-556-3648
RAWLINGS MANUFACTURING WASTE WOOD GRINDER. IN STOCK, MANY SIZES AVAILABLE, WEAR PARTS AVAILABLE FOR RETRO FITTING YOUR HOG. CALL 406-728-6182 FOR DETAILS.
Equipment Location:Missoula, MT
Rawlings Manufacturing, Inc.
406-728-6182
Schutte-Buffalo 1320 w/ 50HP Leeson motor, good shape, $8500 570-539-2063
Equipment Location:Mt Pleasant Mills, AL
Alderfer Lumber Company Inc
570-539-2063
STANDARD LISTINGS
75 HP Motor Swinging Hammers Infeed Hopper
Equipment Location:NY
Carolina Machinery Sales, Inc
704-288-1904
ARASMITH Bark Grinder - 45 x 63-1/2 inch top feed opening drum style bark hog. Features 50 inch diameter drum with fixed teeth. Serial HH-1368-692. Top feed, bottom discharge. 20 tons per hour or more capacity. 200-300 HP recommended. see our entire inventory at www.benjones.com
Equipment Location:Columbus, GA
Ben Jones Machinery
706-324-2604
ARMOR PLATE MINI-MILL 12" X 20"-S/N 13843, 20HP Motor, Bottom Discharge
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
CAM-WOOD WX-1004 Horizontal GrinderImpact resistant tooling with excellent wear capability. Specifications & features: Horizontal feed, 10 HP - 1,750 RPM drive motor; infeed chute with 5" dia. feed roller driven by 0.5 HP motor, provides a feed rate of 16 FPM. -- 5" Diameter air discharge. -- Equipped with: 10" x 4" Max. cross section cap.; (8) rotary cutter sets with cutter head angle to allow aggressive cutting rates and high speed shredding of waste; 10" dia. rotor; 575 RPM. -- The shaft rest for the cutter head is constructed by round hollow with special angle for cooling during production. -- Complete with: Removable screen for easy clean up and chip size changes from standard 1/2". -- Includes: Operators' & Parts Manual and covered by (1) Year Warranty.
Equipment Location:WEST COAST, AL
EX-FACTORY INC.
704-841-2001
CAM-WOOD WX-1502H Horizontal GrinderImpact resistant tooling with excellent wear capability. Specifications & features: Horizontal feed, 20 HP - 1,750 RPM drive motor; infeed chute with 8-5/8" dia. feed roller driven by 0.5 HP motor, provides a feed rate of 25 FPM; 8" dia. air discharge. -- Equipped with: 15-3/8" x 2-3/8" Max. cross section cap.; (18) rotary cutter sets with cutter head angle to allow aggressive cutting rates and high speed shredding of waste; (4) stationary cutter sets; 10" dia. rotor; 690 RPM. -- The shaft rest for the cutter head is constructed by round hollow with special angle for cooling during production. -- Complete with: Removable screen for easy clean up and chip size changes from standard 3/4". -- Includes: Operators' & Parts Manual and covered by (1) Year Warranty.
Equipment Location:WEST COAST, AL
EX-FACTORY INC.
704-841-2001
CAM-WOOD WX-4150 Horizontal GrinderImpact resistant tooling with excellent wear capability. Specifications & features: Vertical-feed Chute, 50 HP - 1,750 RPM drive motor;41" x 12" infeed chute; (12) rotary cutter sets with cutter head angle to allow aggressive cutting rates and high speed shredding of waste. -- The shaft rest for the cutter head is constructed by round hollow with special angle for cooling during production. -- Complete with: Removable screen for easy clean up and chip size changes from standard 1/2". -- OutPut: 1,300 - 4,000 Lbs/Hr, depending on material and moisture content. -- Includes: Operators' & Parts Manual and covered by (1) Year Warranty.
Equipment Location:WEST COAST, AL
EX-FACTORY INC.
704-841-2001
CAM-WOOD WX-5012 PL Horizontal GrinderImpact resistant tooling with excellent wear capability. Specifications & features: Vertical-feed Chute, 100 HP - 1,750 RPM drive motor;41" x 12" infeed chute; (15) rotary cutter sets with cutter head angle to allow aggressive cutting rates and high speed shredding of waste; 15" dia. rotor; 530 - 620 RPM. -- The shaft rest for the cutter head is constructed by round hollow with special angle for cooling during production. -- Complete with: Removable screen for easy clean up and chip size changes from standard 1/2". -- OutPut: 1,100 - 1,900 Lbs/Hr, depending on material and moisture content. -- Includes: Operators' & Parts Manual and covered by (1) Year Warranty.
Equipment Location:WEST COAST, AL
EX-FACTORY INC.
704-841-2001
24'' Top feed Challenger Grinder, w-extra screen, good condition
Equipment Location:Middlebury, IN
Showcase Equipment
260-350-8953
Champion Hammer Mill 18"x30" opening, 1/8" Screen Holes, Approx 10 to 12 ton an Hour, Came out of Pellet Mill, 44" Diameter rotor tip to tip Serial # 63065. Parts available through Champion.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Champion 30" x 28" Hammer Mill w/250HP Electric Motor & Industrial Magnet
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
CRESSWOOD Horizontal Grinder - 2007 30 HP low rpm, horizontal grinder with power feed. Features load sensing controls and 15' vibrating infeed conveyor. Located in Florida panhandle. Visit www.benjones.com for our complete inventory.
Equipment Location:Columbus, GA
Ben Jones Machinery
706-324-2604
2002 Cresswood 3630 Electric Stationary Grinder - 50 horsepower electric engine - Very good condition. Extras: (1) new anvil; (7) cutting teeth; (9) teeth holders; (9) bolts for teeth.
Equipment Location:Largo, FL
Apollo Equipment
800-982-2844
CRESSWOOD HF-36-30 Hopper-Fed Low Noise Grinder Specifications: -- 30 HP Rotor motor; 10" dia., 36" long rotor with (42) indexable knives operating at 50 - 150 RPM; 30" x 44" cutting chamber. -- Hydraulically operated pusher ram with a 36" stroke automatically advances & retracts on a continuing cycle, pushing the scrap into the low RPM grinding head. -- Pusher Ram automatically resets in case of material jams. Complete with: -- 7.5 HP Ram motor, interchangeable screen; 8" dust collector pick-up, self-contained outfeed blower.
Equipment Location:SOUTHEAST
Jim Reedy
800-374-5009 ext:455
1998 Cresswood EF60 Electric Horizontal Grinder - Electric Engine - 100 Horsepower - Extras - Stationary - Average Condition
Equipment Location:Largo, FL
Apollo Equipment
800-982-2844
CRESSWOOD HF-36-30 Hopper-Fed Low Noise Grinder Specifications: -- 30 HP Rotor motor; 10" dia., 36" long rotor with (42) indexable knives operating at 75 - 100 RPM; approx. 36" x 42" cutting chamber; flared hopper with 88" x 81" opening. -- Hydraulically operated pusher ram with a 36" stroke automatically advances & retracts on a continuing cycle, pushing the scrap into the low RPM grinding head. -- Pusher Ram automatically resets in case of material jams. Complete with: -- 7.5 HP Ram motor, 1-1/4" interchangeable screen; 8" dust collector pick-up, self-contained outfeed blower.
Equipment Location:SOUTHEAST
Jim Reedy
800-374-5009 ext:455
Horizontal feed, low RPM grinder, 5" x 24" feed opening and aggressive feed roller infeed system. -- Equipped with: 10" Dia. x 24" wide grinding rotor head with (42) indexable cutters, rotor grinds at approx. 100 RPM - 20 HP main motor with soft start. -- Aggressive counter weighted feed roll system can process hard woods and soft woods - green or dry, at rates of 900-4,000 Lbs/Hr. Dust collection outlet with 10" OD. -- Feed system consists of a 30" wide x approx. 12' long vibrating infeed conveyor. -- Complete with NEMA 12 control box with motor controls and 8" auger discharge. --Runs great and grinds up scrap wood. --(Gearbox leaks oil) --OBO
Equipment Location:MIDWEST
Jim Reedy
800-374-5009 ext:455
CRESSWOOD EF-60-75 Horizontal Feed, Low RPM Grinder -- Specifications: 7" x 60" Feed opening and pinch type agressive feed roller infeed system feeding up to 17 FPM . -- Equipped with: 60" Wide grinding head with indexable cutters, rotor grinds at approx. 425 RPM; 75 HP main motor; chip collection outlet with 12" OD auger discharge pipe; interchangeable screens (confirming screen hole size); pinch type infeed roller system. -- Complete with: NEMA 12 control box with motor controls, 100 amp disconnect which accomodates all the components, variable feed drive for feed roll.
Equipment Location:MID ATLANTIC
Jim Reedy
800-374-5009 ext:455