Gang Rip Saws For Sale
Category
Gang Rip Saws
112 Results Found
$ 7,900
Call for Price
$ 19,800
SILVER SMRS-300A Gang RipsawSpecifications: -- 12" Width cap., 50 HP - 4,000 RPM motor -- 70 mm dia. sleeve for max. 14" dia. saw blades -- 4-3/4" max. depth of cut -- 8-3/4" throat depth, 10" min. stock length.Equipped with & Features: -- 3 HP feed drive, 0.5HP head elevation motor with -- 0 - 120 FPM feed speed via direct drive with gear reducer -- Automatic chain lubrication. -- 60" x 30" Table -- (2) upper infeed & (2) upper outfeed rollers at 4" in dia. -- Top & bottom anti-kickback fingers -- Main "twin" dust hood with 8" dia. outlets, -- Long adjustable infeed fence.
$ 14,700
STETSON ROSS - MR-14, ...Dip Chain Gang Rip Saw75 HP Motor, belt drive to arbor; 14" wide capacity.Specifications: -- 3-9/16" Max. depth of cut; 12" dia. blade capacity; 42" throat clearance from extreme outboard saw. -- 5 HP Variable feed speed from 50 to 200 FPM; automatic feed chain lubrication system; (6) overhead pressure rollers, adjustable via 0.75 HP motor; manually operated hydraulic arbor lift; 20" min. length of stock. Complete with: -- (2) Saw sleeves, (1) sleeve with a complete set of spacers; setup stand, oil bath lubrication of bearings, and oil mist feed chain lubrication; anti-kickback fingers; infeed fence, load meters, and magnetic starters. -- Sawblades include: (7) Sets of saws; (1) set of (12) blades; (1) set of (8) blades; (1) set of (7) blades; (1) set of (6) blades; (2) sets of (2) blades; and (1) 3/4" wide hogging blade matched to the diameter of the saw blades. - All blades are 36-tooth. -- Also included: MEREEN-JOHNSON Laser Light Mounting Stand that was used with this "MR-14"; no laser lights included, but there is a power supply to handle up to (12) Lasers. -- Currently with Cabling for (4) fixed & (5) sliding lasers and positioning mounts; in 2006, Stand sold new for over ...$ 2,000 without lasers.NOTE: The feed chain was replaced in 1994 and a new saw sleeve was added in 2003, or about a year before retiring the machine from moderate use. The machine appears to have good feed chain life remaining.
Call for Price
It is a 2 saw re-rip with one moveable saw and an adjustable fence. Capacities: Minimum length = 8” Maximum length = 192” Minimum width = 1 ½” Maximum width = 6” Minimum thickness = 7/8” Maximum thickness = 1”
Call for Price
Call for Price
$ 8,500
Paxter Weld & Machine gang rip, 2 9/16" arbor, spacers & some blades, spring loaded powered press down rollers, 8"x 12" capacity, variable speed feed, with blower, unit powered by a Perkins diesel w/ 2500 hr. Unit In working condition. Call 906-635-9435 for more info.
Call for Price
Multirip circular saw for block cutting, with reinforced structure and high production speed. Trailed top and bottom rollers, upper rollers with adjustment, shafts with cartridge system for quicker and more efficient replacement of the set of saws, U-beam base with levelers and central lubrication. It does not come with the circular saws. - Maximum inlet width: 600 mm; - Minimum inlet height: 70 mm; - Maximum inlet height: 160 mm; - Double arbor: Ø 80 mm; - Number of saws per axle: 10x; - Exterior saws Ø: 350 mm interior saws - Ø: 110 mm; - Upper press rollers: 2x; - Bottom rollers: 6x; - Max. Feed speed: 35 m L / min for logs - 160mm above in diameter; - Max. Feed speed: 40-50 m L / min - only for logs 130-160mm in diameter; - Lower main motor indicated: 200 hp 2p (1x) Included; - Top main motor indicated: 150 hp - Main motor belt: 4 / 3v (8 Pcs); - Motor traction of the rollers: 5 cv 4p; - Gearmotor: GS (crown and pinion); - Length: 3366 mm; - Width: 2782 mm; - Height: 2233 mm; - Approximate weight: 5.470 kg
WINTERSTEIGER - DSG 150 ECO, ...Thin Cutting Frame SawSide & Center Guides: Fitted as standard on the basic machine to guarantee the broadest possible range of application. Specifications: -- 11 kW (15 HP) Main motor; 0.3 - 1.5 MPM feed speeds; 210 mm saw frame stroke with (450) strokes/Min. -- 30 - 216 mm Cutting height, adjustable as required; max. +/- 0.5 mm difference in block height. -- 60 - 150 mm Cutting width (side guide); (2) 23 - 70 mm cutting width (using center guide); (2) channels max. 72.5 mm using 7.5 mm guide or with (5) channels max 24.5 mm using variable block width; 300 mm min. block length. -- 1.5 mm Cutting accuracy; +/- 0.2 mm Cutting loss (depending on saw length). -- Max. (30) saw blades (excluding scraper saws); (3) 120 mm sawdust extraction tubes. -- "Air Jet" Module: Cleans the lamellas and saw blades during the sawing process by blowing away the sawdust; cools down the saw blades during the sawing process and cleans the shaving space of the saw blades. -- "Air Jet" also increases the saw blades life and improves the lamella's accuracy. Sawdust-free lamellas can then be glued immediately after cutting.Comes with transformer