Equipment For Sale

Reid Fabricators Incline Conveyors Custom built 13' Incline Fixed Stacking conveyor New 235/80/16 tires Never used

REINBOLD - AZR 600 S: Hopper Feed Low Noise GrinderSingle shaft compact Shredder.Specifications -- Opening: 600 mm x 800 mm H (23.6" x 31.5") approx. 0.6 cubic meter. -- Rotor diameter: 252 mm (9.92") with 90 RPM. -- Main motor: 11 kW (15 HP). -- (15) Knives. -- Discharge: 160 mm (6.3") With screen: 15 mm Holes. -- Hydraulic pumping unit: 3 HP. -- Machine weight: 2,900 Lbs.

Excellent condition Less than 6 hrs on machine

drop deck spread axle, GVWR 90,000lbs.

RELIANCE gear reducer: 40:1 ratio; 5 HP. Price $900.00. As-is/where-is. (Inv. # G-12).

REM - CC10, ...Used Can FlattenerThe REM Can Crusher is a complete separating, crushing, and blowing unit for aluminum cans.Specifications: -- Efficiently processes: 1,800 - 2,000 Lbs per hour. -- Load cans in the hopper and the conveyor carries the cans across the magnetic head pulley separating the steel from aluminum. -- The aluminum cans are crushed between a steel pressure plate and the rotating crusher drum with hardened steel bars; the cans then drop into a high-velocity air stream and are blown into a trailer or storage container. -- Features: 16" Wide belt; Crusher with: 10 HP 240/480-Volt, 3-phase; Blower with: 7.5 HP 240/480-Volt, 3-phase.

RENCO 3 HEAD BLOCK RIGHT HAND 13' CARRIAGE; 42' TRACK

Rens C220 Metal Detector Electric Box & Sensor

Rens 20" x 20" Metal Detector with Vulcanized Belt System. S/N 080700

Whole Log Metal Detector for logs up to 48" in diameter. Features heavy duty factory built conveyor 22' 8" long with "S" drive. Needs drive motor & reducer and new belt. LS 345 Controls included.

Rens Undermount Metal Detector with Sensor

Rens Metal Detector & Sensor

Rens Metal Detector

Rens 40" Hexagon Pass Thru Metal Detector (Search Coil), 21" x 12' Fiberglass Conveyor Belt Section, S/N HEX40093088 (Not Control Chassis)

RENZO BORGONOVO - BL 94-3, ... Vertical Moulding Stacker. This 3-ARM AUTO STACKER has been specially designed to facilitate the loading of mouldings, picture frame strips, and other processed linear parts onto drying racks.It eliminates manual handling of workpieces, which can mar the finish. It also increases productivity and efficiency compared to manual stacking. The machine can work with moulding of the same length or of varying lengths at the same time.Specifications: -- Workpiece Lengths are 4,900 mm (192") Max. & 1,500 mm (58") min. workpiece length, 20 mm min. and 150 mm (6") max. material width cap. -- Stacking Capacity - (20 - 30) pieces/Min. -- Overall Height of 2,200 mm (87"); Overall Width 2,300 mm (91"); Overall Length of 4,000 (157"). -- Work Height at Infeed 860 mm ( 34"); Racks have (11) arms that extend out approx. 39" with 4" in between arms.Operation: -- Automatically loads just-painted mouldings onto air drying rack. -- Process: As moulding exits Coater, it is moved by belt conveyor to (3) arms, which lift the piece up and over the top of the Stacker Station; coming down the other side, it places the moulding onto (3) arms. A belt conveyor transfers the piece onto the 11-tier drying cart. -- Lifting can be triggered by electric photo-eye to determine the position of off-feed arms (arms move down as each tier of the rack is filled) and place moulding on the rack (indexing back-to-front).This Stacker comes with (1) rack; additional racks are available, priced at ...$ 1,950 each

RENZO BORGONOVO MVS-2500 Automatic Sanding and Buffing MachineFOR LINEAR FRAMES AND PROFILES - Sanding and buffing of frames, rods, ledges and fitting parts of veneer, solid, raw or varnished wood, etc. (processing of 3 sides for each pass). -- Advancing speed electronically variable by inverter: 10 TO 50 M/MIN. -- Total power: kW 10,5 (14 HP) -- Compressed air: Atm 6 -- Total exhaust capacity; m3/h. 2800 (25 m/sec.) -- Working height: mm. 10 min. mm. 100 max. -- Working width: mm. 20 min. mm. 200 max. -- Working length: mm. 1200 min.DISC SANDING UNITS TYPE “SCOTCH BRITE"; (N° 4) -- Power motor: 3 HP (2.2 kW) -- Rotation speed: 1400 RPM -- Disc sanding unit holder shaft diameter: mm. 30 -- Spindle-disc sanding unit connection flange diameter: mm. 76 -- Disc sanding unit diameter: mm. 200 max. -- Disc sanding unit height: mm. 100 max. -- Dust suction hood diameter: mm. 100 -- Extraction rate: m3/h. 700 (25 m/sec.)

RENZO BORGONO 800/I Hot Embosser. Machine is designed to "hot engrave" decorations onto picture frames, furniture accessories and mouldings. Heats the pattern wheel and presses it into wood transferring the design onto the product. -- Max. 450 mm(7.7") Engraving width cap.; 700 mm (27.5") material width cap., MIn: 100 mmm (3.94") width; 80 mm (3-1") dia. arbor; 140 mm (5.5") min. and 440 mm (17.3") max. embossing roller dia.; 3 mm (1/8") max. embossing depth with base-relief rollers and 7 mm (0.27)") max. depth with cutting edge rollers. -- 1.5 HP (1.1KW) Top drive gearmotor, feed speed 5.5 - 26 FPM output. -- Approx 8 KW heating by electric lamps, with thermal probe/thermostat. -- Water cooled shaft to avoid flexing and hear propagation. Coolant circulation pump 0.12 HP. -- Overall Dimensions: 1200 mm x 1400 mm x 17 mm height (48" x 55.5 x 71" H), Net weight: 950 Kg/2100 Lbs..

These machines are in good working condition and can be inspected under power. Designed to produce a wide range of spiralled wood roping in a continuous length. Square stock is fed into the machine to produce twisting rope. Manufacturer specs (to be confirmed): - Type L.C.B. 600 - .75 kW feed motor - 1.5 kW drawing unit - 1.5 kW right cutter motor - 1.5 kW left cutter motor - Workpiece diameter: min 8 mm, max 60 mm - Workpiece length: infinite - Feed speed: 15-80 RPM - Spindle diameter: 18 mm - Includes (1) cutter on drawing unit used for rope moulding - 3-4" dust ports - Splitter machine to cut dowels in two - (4) different diameter cutters and dies

RENZO BORGONOVO, BL 94-2, ...Vertical Moulding Stacker.This 2-ARM AUTO STACKER has been specially designed to facilitate the loading of mouldings, picture frame strips, and other processed lineal parts onto drying racks. It eliminates the manual handling of workpieces which can mar the finish. It also increases productivity and efficiency compared to manual stacking. The machine can work with moulding of the same length or of varying lengths at the same time. -- Workpiece Length: 3,000 mm (118") Max. & 1,800 mm (72") min. workpiece width; 20 mm min. and 150 mm (6") max. material width cap. -- Stacking Capacity: (20 - 30) Pieces per minute. -- Overall Height: 2,200 mm (87"). - Overall width: 2,300 mm (91"). - Overall Length: 3,400 (134"). - Work Height: At Infeed 860 mm(34"). - Racks has (11) arms that extend out approx. 39" with 4" in between arms. -- Automatically loads "just painted" mouldings onto air drying rack. -- Process: As moulding exits coater, it is moved by belt conveyor to (2) arms which lift the piece up-and-over the top of the Stacker Station; coming down the other side, it places the moulding onto (2) arms, and a belt conveyor transfers the piece onto the 11-tier Drying Cart. -- Lifting can be triggered by electric photoeye to determine position of off-feed arms (arms move down as each tier of the rack is filled) and place moulding on the rack (indexing back-to-front). -- One rack included; additional racks, each ...$ 900.Machine overall dimensions: 3,400 x 2,300 x 2,200' weight: 1,200 kG.

Renzo Borgonova Rope Moulder and Splitter