Dry Kiln For Sale
15 Results Found
AMERICAN WOOD DRYER Direct-Fired Lumber Kiln - New, still at MFG' place:Now offered at 20% discount off the original cost and complete with the following main components and features: -- 20’ x 54’ in size, 39,000 Board Foot (92.03 Cu. Meters) capacity or 62,100 linear feet capacity, Package Type, Front Loading, Dry Kiln Building features: -- Gable Roof. -- R-20 Insulated ALCLAD Aluminum Panels, stainless-lined. -- Fan Deck Grating. -- Motor removal equipment. -- Drystar® Computer Control System, single head zone with (4) Rtds. -- 10 MM BTU/Hr. Natural Gas Fired Furnace. -- Kiln control and furnace Room approx. 20’ x 30’ x 11’ high on lowest side. -- (12) Steel lumber backstops. -- (7) 20 HP Air Circulation Fans. -- (7) SIEMENS Variable Frequency Fan Drives for 20 HP Fans. -- Accu Spray air atomized cold water Spray System with (7) Spray Nozzles. -- Insulated Door mounted on overhead track.The following $-figures show the distribution of funds applied to the original purchase price of nearly ...$466,000: ● Kiln with Gas Fired Furnace: ...$391,310 (The furnace itself is approx. ...$100,000.) ● Control System: ...$16,540 ● Furnace Room: ...$33,145 ● Backstops: . ... $ 5,400 ● VFD’s: ...$14,500 ● Water Spray: ...$ 5,100NOTES: ● The manufacturing of this equipment is nearly complete but halted pending the sale to allow for new Buyer to make any modifications desired. The price offered includes balance payment due upon completion unless modifications are requested by Buyer. ● The equipment is ls stored in containers located at at a plant facility in Portland, Oregon. ● Installation by the manufacturer can be acquired directly from AMERICAN at Buyer’s option. ● Warranty offered by AMERICAN WOOD DRYER as part of the factory installation. ● Building shown in photo is representative only, not the one for sale here.
This is your Opportunity, Western Kentucky provides for various species and grades of lumber from a 5 State area. Perhaps supplying your own lumber for your dimension, cabinet shop, wood products or flooring operation is just what your organization needs to stay competitive. Also an avenue to supply to ever growing export markets to Canada, Russia, Saudi Arabia, India and More . Contact us about the new price reduction • 560 MBF American Wood Dryer Kilns • Wood Waste & Gas Boilers • Trim & Auto Stack Line, Lumber Down Stack & Grading Line • 51,000 Sq. Ft. Under Roof W/ Nice Office • Vision Talley W/ Lindsay Position Table • Items too numerous to Mention Contact Jackie for more information and brochure 931-698-3342
AMERICAN WOOD DRYER KILN 2-chamber package type lumber dry Kiln; Complete with the following components and features: -- Capacity approximately 50,000 board feet of 4/4 lumber per Chamber for a total of 100 MBF. -- Steam Heated, requires low pressure steam (15 psi). -- (5) Fans with VFD control. -- Controls and Boiler Room (Boiler available). -- Dimensions: 35'-8" W x 33' D x 19' Floor to Fan deck. Boiler Room Dims: 30' W x 32' D x 23 H.New 1994, Very good condition.
AMERICAN WOOD DRYER KILN 3-chamber package Type lumber dry Kiln; Complete with the following components and features: -- Capacity approximately 25,000 board feet of 4/4 per Chamber for a total of 75 MBF. -- New 2004. Very good condition. -- Steam Heated, requires low pressure steam (15 psi). -- (4) Fans with VFD control in each chamber. -- Control Room with Kiln Controls.Dimensions available on request.
Our drying kilns are suitable to treat any type of wood. In any latitude the wood is cut, transported, transformed. Incomac kilns have all the structural and operational requirements to face adverse temperatures and environmental conditions. Incomac technicians and operators intervenes on the spot to install the kiln and make the testing. Every Incomac standard kiln, has been studied to support snow loading of 120 kg/m3and, if required by the client, until 250 kg/m3, it resists to a wind speed until 100 km/h and it increases the thermal insulation system on the Countries with very cold climates. Incomac’s drying systems are the result of continuous development which reflects the applications, the experience and the competence of INCOMAC in facing and solving the problems connected with wood drying. The ICD wood dryer is powered by a thermal fluid: hot water, superheated water, diathermic oil or steam. Heating is provided thanks to heat exchangers with bimetallic finned tubes, the air exchange is with motorized dampers. This model is recommended for customers with a central heating plant available. With a few technical adjustments, these driers can also work at high temperatures (up to 110°C).
ICS (INNOVATED CONTROL SYSTEMS) PORTA-KILN Portable Lumber Track KilnKiln can be used for both Kiln Drying & HT (Heat-Treated Drying). Seller used for HT Drying year-around.Specifications: -- Kiln size 8' x 8' x 30' L, Drying capacity 6,500 FBMEquipped with: -- Propane heatingWeight: 10,000 Lbs.
Kiln-Direct Pallet Heat Treating Kiln Set up for Propane or natural Gas Fired. 12'6 x 42'x 9'. Dries 1 Truck load 48" x 48" Pallet one step up from Standard.
KILNTEK LUMBER DRY KILN 45k to 50k per charge of 8/4 Natural gas burner Tram Loaded Wet Bulb/Dry Bulb Measure 4/ 6' Fans Forward/Reverse Machine Type: Kiln Manufacturer: Kilntech Model: Dry Kiln Machine Location: South East
NYLE CF3LS-40-0-15 Lumber Dry Kiln with a total capacity of 122,000 board feet;The system includes the following major components and features: -- (2) KATRES AFK 61,000 BD. Ft. aluminum link chambers, 45' wide X 80' long X 26' high. -- (8) 0.5 HP Bi-directional computer controlled circulation fans. -- (2) 10 HP BECKETT blowers. -- (2) NYLE HT 108 dehumidification drying systems with (2) 40 HP compressors each. -- (1) 40 BHP BOILERSMITH oil fired boiler and BOILERSMITH receiver pump. NOTE: These are forklift loaded kilns and price includes loading for transport. Buyer responsible for freight.These units are dissassembled and in storage.
air dryer, digital control, single phase, new compressor (used 1 summer). Motivated seller!! Call 419.895.1183 for more info.
2006 SII Heat Treat Dry Kiln 26' x 24' X 9' high door opening chamber Can treat 600 GMA pallets at a time Propane fired 2 million BTU Newly upgraded software Call for more details