Equipment For Sale

US CONCEPTS FAS-HD "Arch Type" Shaper;Specifications: -- Universal arch moulder, equipped with two (2) axis spindle adjustment and spindle tilt in order to easily and accurately match the cutter to the moulding profile. -- The spindle adjustment and floating feed make cutting circular, elliptical, and straight casing and crowns a breeze.

US CONCEPTS CHB 12 HauncherThe CHB-12 Hauncher-Notcher is designed to notch along the edge of the board or across the end.Typical applications: Box joints, finger joints, bee boxes, hinge notches, coping, profiling in furniture and window industries, decorative cuts, beaded frame cabinets, toe kick notches, etc. Equipped with: a 40 mm horizontal spindle that moves up hydraulically past the table with the clamped material. -- A backup board in the table and climb cut ensure the clean-cut, even on cross grain. -- Material air clamps and spindle motion are actuated by a foot switch. Specifications: -- Spindle Dia. 40 mm, Spindle Length 12". (Also available in 16" & 20" capacities) supported on both ends; -- Max. Cutter Dia. 10" (254 mm); max. Cutting Depth 2-1/2" (64 mm); max. Material Stacking Height 8" (200 mm). -- Spindle Speed 4,300 or 6,200 RPM; Feed Speed (Air/Oil) 0 - 25 FPM; 15 HP motor; Dust Outlet 2 x 6" (150 mm).Complete with: -- (2) Air Clamps, Back Fence, Side Pivot stop, and Stop Bar. -- Table Size 36" x 16"; Machine Weight 1,650 Lbs (750 kG). -- OPTIONS: Electric; 20 or 25 HP motor; Additional Air Clamps; Additional Side Stop; Center Fence mounted to the Table; Horizontal Clamps; Extended Stop Bar. -- Other Options: Fixture for 45° Cut (Mitered cabinet Doors or Stretcher Bars).

US CONCEPTS CHB-16 HauncherThe CHB-16 Hauncher-Notcher is designed to notch along the edge of the board or across the end.Typical applications: Box joints, finger joints, bee boxes, hinge notches, coping, profiling in furniture and window industries, decorative cuts, beaded frame cabinets, toe kick notches, etc. Equipped with: a 40 mm horizontal spindle that moves up hydraulically past the table with the clamped material. -- A backup board in the table and climb cut ensure the clean-cut, even on cross grain. -- Material air clamps and spindle motion are actuated by a foot switch. Specifications: -- Spindle Dia. 40 mm, Spindle Length 16". (Also available in 20" capacity) supported on both ends; -- Max. Cutter Dia. 10" (254 mm); max. Cutting Depth 2-1/2" (64 mm); max. Material Stacking Height 8" (200 mm). -- Spindle Speed 4,300 or 6,200 RPM; Feed Speed (Air/Oil) 0 - 25 FPM; 15 HP motor; Dust Outlet 2 x 6" (150 mm).Complete with: -- (2) Air Clamps, Back Fence, Side Pivot stop, and Stop Bar. -- Table Size 42" x 16"; Machine Weight 1,650 Lbs (750 kG). -- OPTIONS: Electric; 20 or 25 HP motor; Additional Air Clamps; Additional Side Stop; Center Fence mounted to the Table; Horizontal Clamps; Extended Stop Bar. -- Other Options: Fixture for 45° Cut (Mitered cabinet Doors or Stretcher Bars).

US CONCEPTS FAS-106, 6" Shaper MoulderSpecifications: -- 31" X 49" Table size -- 10 HP main motor -- 1-1/4" spindle, 6,500 RPM spindle speed -- 6" max. cutting weight, 3-3/4" max. part thickness, 6-1/2" max. cutter dia. -- 3/4 HP variable speed DC feed motorEquipped with & Features -- (5) horizontal feed rolls -- Cast iron table -- Digital cutting height adjustment.

75 HP 550 Volt 3 phase

(20) Units cap. Rapid Discharge Bin, prefabricated for nut & bolt erection, exterior constructed of 12 gauge structurally reinforced steel. -- Chips are discharged by (2) hydraulically operated shell clamp type bottom doors for a 78" x 96" free fall opening, opening & closing via (2) 5" dia. double acting cylinders w/stroke of 48", 15 HP hydraulic pump motor with 20-gallon reservoir; braced, wide flange steel beam support structure with 14' truck height clearance. -- Complete with: Weather covers, (1) bin level indicator, embed plates w/detailed foundation plans, operator's platform, upper catwalk w/handrail & (1) caged ladder. - It holds (20) units or the equivalent of 4,000 cu. ft. by volume. - Price includes (1) coat of green primer for exterior & (1) coat of safety yellow for hand railing, ladders & guards. - Price does not include Delivery cost, Foundation, Installation or Starters & Switches for electric motor. -- This is a representative photo - other sizes are available on application.

US gear reducer: variable speed; 5 HP. Price $500.00. As-is/where-is. (Inv. # G-14).

15 HP 460 volt 3-phase 63 CFM Capacity

Usifab Pallet Nailer with Stacker. 2005 56"x52". Two available. Located in Ontario. #C949

Usifab Pallet Nailer with Stacker | 2005 | 56"x52" | 600V

Usifab Pallet Nailer with Stacker. 2005 56"x52"

USNR Canter-Sawing Line consisting of: 60' double length infeed section; 10' log rotation section; (ASM sharp chain--NO longer available); 40' infeed section; 6' chipping canter section with 200 HP motors; 7'60" twin band sections with 150 HP motor; 25' outfeed with board off loading; 20' off-feed belt. Price includes removal cost (ready to load); all hydraulic power systems; all Square D motor control centers; Sub-operator's cab with controls included. 2001 model, only operated until 2007. Loaded onto your trucks $245,000 OBO.

Left hand lumber stacker designed to stack green lumber packs 46" to 52" wide and up to 20' long. It was built as a green stacker with automatic stick placement. Stick chain and trays are in place. Stick dealing system is missing. It was last used as a package maker for dry lumber.

3 Guide Milling Machines Good Working Condition Stands Included

This system was removed last year. Controls include: - USNR M6 millexpert computer system for edger. - Installed 2010 and took out December 2022. - (1) Windows 7 analize computer and (1) data acquisition computer. - (17) M6 Dynavision scanner heads - Allen Bradley PLC-5/40E with (5) 1771 input cards and (7) output cards, (4) 1771 linear positioning cards. - (3) TT5RBU0240 24” stroke temposonic wands - (4) 60” stroke TTSRBU0600 wands - (7) Moog model 641F229C valves - (2) Operator panels

USNR 48" 6K Chipper S/N 57-598L

USNR 60,000 Board Foot Kilns (10) Available

USNR 18” Ring Debarker.

Features dependable ring gear & pinion feed roll drive and rubber band tool tension. 60 HP ring drive.

V-HOLD - MF-2230, ...Profile Grinder.Technical Specifications MF 2230: -- The max. dia. of the cutterhead is 300 mm. -- Max. profile length: 300 mm. -- Movement of a desktop: 45 mm. -- Sharpening angle: ± 30°. -- Grinding wheel dimensions: 225 x 32 mm. -- Grinding wheel rotation: 2,800 - 4,000 RPM. -- Total power: 1.59 kW. -- Dimensions: 1,260 x 1,250 x 1,830 mm. -- Weight: 560 kG.