|
COMPLETE SAW MILL
CARDINAL - SWP complete semi-automatic saw mill consisting of 3-strand log in-feed chain deck; 2-strand chain seperator table; de-barker in-feed chain conveyor, MORBARK rosser head type 60 HP de-barker; c/w out-feed chain conveyor with hydraulic log tipper; 3-strand mill in-feed chain conveyor; CARNIDAL incline separator; CUT-CO 36"twin saw with twin overhead blades; cobination single cant twin slab carrier with manual refuse station; CARNIDAL incline slab de-scrambler; re-saw/grading in-feed roll conveyor; CARDNIAL 689C 42" slab re-saw automatic saw with MUDATA PLC control; 6-strand edger in-feed table; 7-strand re-saw out-feed table; CARDINAL 4-strand finished lumber out-feed table; CARDINAL incline de-scrambler; CANADIAN TRIM double end precision cut to length saw; 6-strand trim saw transfer table; waste/scrap recovery system.
HAS THE CAPACITY TO SAW 40,000 BD FT OF 8 FT CEDAR IN 8 HOURS
LOCATED IN ARTHURETTE, NB. COMPLETE SAW SHARPENING SYSTEMS INCLUDED. MILL COMES WITH 46 ACRES OF LAND.
Equipment Location:Moncton, NB
Graystone Quarries
506-961-2445
|
|
Like new barely used Hurdle Sawmill - 60ft 3-Beam Trailer, 4 Headblock Challenger Carriage, 36" Opening, Offbearer Belt, Heavy Duty Chain Log Turner, Soundproof Cab with AC. This is a perfect sawmill for cutting long length lumber and timber. After we purchased it we never really put it into service. the original cost was over $200,000.00
Equipment Location:Nacogdoches, TX
|
|
2012 Vertical edgers
2009 carriage
Ready to run, just needs motor and belts
Equipment Location:Corbin, KY
J & T Lumber
606-528-7669
|
|
Cleereman Model 40 3HB Carriage Track and Panagraph W/ Saw Cab and Controls
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
|
|
Cleereman 3 HB Mill Track Panagraph and Husk Frame
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
|
|
Cleereman Model 36 3HB Carriage Track Panagraph Cab and Controls
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
|
|
36" Cleereman LH Carriage, Track, Cab, Controls & 100HP Jacobson Carriage Drive.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
|
|
Cleereman 42" 3HB Slant Carriage w/Cab & Controls
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
|
|
Cleereman Model 40 Circle Saw Mill Serial # 40-518 95
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
|
|
Cleereman Model 48 3HB Carriage, Track and Panagraph
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
|
|
CMC 3 Head Block Circle Mill cab and controls carriage and Track
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
|
|
CM Sawmill Comes With Air operated 15ft carriage Selset set works Head works with 48 inch saw 100hp electric motor Hydraulic pack with all hoses FREE Delivery within 100km of Moncton,NB Trailer not included
Equipment Location:Moncton, NB
Graystone Quarries
506-961-2445
|
|
Tyrone Berry feed system with cooler
Split belt with kickersto a Lane horizontal edger 50HP electric
Feed deck with stop and load and log turner
Outfeed green chain and cant flipper
Large booth
Saw Paw Sharpener with (2) extra blades
Rens Metal detector
Sawdust collection system
All electical wiring included and starters and extra parts
134M Moulder 4 x 12" included
Air system for sawdust that also serves the 4 sided moulder
Equipment Location:MA
Carolina Machinery Sales, Inc
704-288-1904
|
|
180 Swing Blade w/ Horizontal Bar Blade for Log Splitting & Table Tops
Equipment Location:Hopkinsville, KY
Kittrell Sawmill Brokers and Appraisers
931-797-6284
|
|
Dixon Portable Circle Saw with 52" Bottom Blade and 38" Top Blade with 4 Saw Vertical Edger, Runs off a Fuel Efficient 247 HP Duetz Motor. 2 Strand Infeed Deck
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
|
|
Edminston Short Log Circular Sawmill
Edminston 25’ O.A.L x 3-Strand Log Deck (O.A.L= Over All Length)-
- 3-Strands of 81-X chain
- 3-Arm Stop & Loader
- 3-Arm Carriage Loader
- Cross sills
- Hydraulic power
EDMINSTON Log Turner-
-Heavy Roller Chain & Dog Construction
-Hydraulic Power
SHOP BUILT-
- Track & Ways
- Support Legs
Edminston Carriage-
- 3-Headbloc w/ Setshaft Movement
- Hammer Dog
- Setworks
- Pantograph
Edminston Belted Husk-
- Includes 2-Bearing Mandrel
- Splitter Blade
- Saw Guide
- 150 HP Electric Mandrel Drive Motor w/ Starter
- Sawyer’s Control Cab with All Mill Controls
- Hydraulic Power-Pac to Power All Edminston Machines
TYRONE-BERRY Model SMA 220 Hydraulic Carriage Feed-
- Includes Motor & Starter
- Includes Cable Drum, Return Wheel & Cable
(Pilot Valve is in Sawyer’s Cab and is included there)
Edminston Live Rolls-
- Flooring
- 6” Rolls x 24” Face x 20’ O.A.L., RH drive (Electric w/ Starter) w/ Dump Pan -
- Flooring (see below)
- Combination (air power) Slab Dump & Edger Transfer (electric power with starter)
- Support steel
EDMINSTON Belt Conveyor-
- 24” FVC Belt x 20’ O.A.L.
- Electric Power w/ Starter
EDMINSTON Slab Belt Conveyor-
- 16” PVC Belt x 50’ O.A.L.
- Electric Power w/ Starter
SHOP BUILT, 3-Strand Collection Conveyor: Parts Only-
- Includes All Components For The Drive, Headshaft, Tail Sprockets and H-78 RT Chain
- Parts Removed From 25’ O.A.L. Unit
Equipment Location:North Carolina
Keith Comeau
704-929-9122
|
|
Product No. 4403
2002
4 Head Block
100 HP Saw
50 HP Hyd. Pump
50' Plus Track
25' Capacity
15' 3 Strand Log Deck
Stop And Load
Off Bearing Belt
Electric/Hydraulic Set
Silvatech Included Not Installed
Currently Under Power
PRICE: $35000
Machine Type: Circular Sawmill
Manufacturer: Edminston
Model: 4 Head Block
Year:
Machine Location: South
Equipment Location:South
Keith Comeau
704-929-9122
|
|
Frick 1180C 4 Head Block Circle Saw Mill, rails, Husk, Controls
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
|
|
Good cond. Complete w/4hblk, 01 carriage; husk w/213 Berry feed & Mellott(M) off-bearer, 2 blades, 200HP mtr & drive; 15HP comp; Meadows edger; (M)636 debarker w/ Patz & 2 (M)log decks; (M)log turner; 58" Mor. chipper w/200HP motor; 20' slab belt & (M)live rolls. Starters incl. NO setworks. 2b removed.
Equipment Location:Burlington, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
|
|
16’ (3) strand infeed log deck with H78 chain, motor and drive
Stop and loader and nose skid section,
Frick (4) HB sawmill carriage with cant flippers and non-defacing dogs,
Air over electric setworks,
62’ of track and 125 HP head saw motor,
Mellott chain type log turner,
Hurdle hydraulic feed works with end of track mount drum package,
Husk frame with new Cox Brothers bearings and mandrel,
Rebuilt saw guide 56” F-8 inserted tooth saw,
110’ newly replaced sawdust chain,
Outfeed rollcases – to transfer cants and boards,
Corley (3) saw edger runs off of head saw will cut 4-1/4” thick x 20” wide,
Fulghum 48” (6) knife chipper with 75 HP motor
….$59,500 OBO
Equipment Location:TX
Kittrell Sawmill Brokers and Appraisers
931-797-6284
|