Sawmill Equipment For Sale
3886 Results Found
Call for Price
Armstrong’s VariSharp CNC band saw sharpener features a two-axis CNC system to grind virtually all band saw tooth patterns used by sawmills today. Touchscreen control, industrial-grade Pentium computer, and brushless servo-driven ball screws replace the two-cam system previously used. With VariSharp, it's possible to sharpen saws you are using today, while you design those you will use tomorrow. Grinding parameters, including on/off the face, gullet depth, and number of grinding passes can be controlled by operator inputs on the touchscreen or manually as on a standard No. 4 sharpener. Grinding wheel rpm and teeth per minute are also touchscreen controlled. A powerful 2-hp grinding wheel motor and variable frequency drive provide optimum grinding performance. Features: Pentium 233 MMX PC control. Brushless servo system for long life and precision grinding control. Touchscreen control for easy operation and feedback about the sharpener, such as number of teeth sharpened per minute, and a picture of the tooth. On-board Armstrong tooth library with over 300 standard, VP, and VPD tooth patterns. New teeth or VPD patterns can be drawn or modified on screen and saved to the tooth library. DXF (Drawing Interchange File) export capability: the operator can download tooth parameters to a floppy disk that saw makers can use to produce the exact tooth pattern the operator has designed on the console. Larger 2 hp (1.3 kW) grinding wheel motor with grinding wheel speed control via the touchscreen. Constant power supply for the PC to minimize machine interruption. Complete control of machine speed. The operator can change the number of teeth sharpened per minute. On a freshly tipped Cobalt Chromium Alloy saw, it is possible to slowly grind the face and top of each Cobalt Chromium Alloy tip while quickly skipping over the rest of the tooth on the first grinding pass. Capacity to sharpen conventional constant pitch saws or repeating segments of teeth with variable pitch or depth, with up to ten teeth per segment. Air back feed units and StrongArm II power clamp are precisely timed via computer outputs. Step-by-step instructions will be available on demand through the touchscreen console to make it easy to train new operators. A detailed operator’s manual covering installation and machine operation is provided. Accommodates toothspace of 1.250" (32 mm) to 3.00" (76mm) The on-board Armstrong tooth library includes over 300 standard, variable pitch (VP) and variable pitch and depth (VPD) tooth patterns available on the touchscreen. Operators can view, modify, and save a single tooth, or a VP/VPD pattern with up to ten teeth in the segment. The tooth library will hold an unlimited number of tooth patterns. When ordering saws, saved patterns can be supplied from the library to the saw manufacturer for use in producing the exact tooth pattern. Machine specifications for a VariSharp are the same as for a conventional No. 4 Armstrong b
Call for Price
Call for Price
Call for Price
Call for Price
Duct work as pictured Make a reasonable offer For new applications please call for layout assistance and pricing!!
Call for Price
Call for Price
Assorted sizes and Features as pictured. heavy duty wielded construction made in USA 60” and 84” filter bag heights please call for pricing upon application
ATLANTIC X-SERIES X-10 MODULAR DUST COLLECTION SYSTEM: -- Specifications:÷Rated @ 5.000 CFM with 7.4" static pressure W.G.; --(24) 7" x 60" Poly Twill cloth "Quick Release" filter tubes,approx. 440 sq. ft. total cloth area; Discharge to (3) plastic bags. -- Equipped with: 10 HP - 1,750 RPMBlower drive centrifugal fan assembly, anti-spark cast impeller; 12" inlet dia. -- System includes 230 Volt (factory installed) magnetic starter. -- X-Series Dust Collectors are compliant withNFPA Regulations 664 and 654 forenclosure less dust collectors.
Call for Price
Call for Price
Call for Price
ATLAS COPCO GA 45 60 HP Oil-Injected Rotary Screw Air Compressor, with 13,975 Run Hrs. & 9,704 Load Hrs.Specifications: -- Cap. 273.2 CFM. -- Maximum allowable working pressure 132 PSI. -- Noise level 70 dBA.Equipped with: -- 45 kW (60 HP) 3,565 RPM IE3 Motor. -- Oil separator. -- Air-cooled aftercooler. -- "ELEKTRONIKON GRAPHIC" Digital controller & monitor system, with LCD Display, Touchpad, & Automatic restart after voltage failure.DE-INSTALLATION & SHIPPING PREPARATION NOTE: Compressor is currently ready to ship and can be loaded from a dock or ground level. It was fully operational without any issues when removed from service in April 2024.
ATLAS COPCO GA 45 60 HP Oil-Injected Rotary Screw Air Compressor, with 15,985 Run Hrs. & 11,072 Load Hrs.Specifications: -- Cap. 273.2 CFM. -- Maximum allowable working pressure 132 PSI. -- Noise level 70 dBA.Equipped with: -- 45 kW (60 HP) 3,565 RPM IE3 Motor. -- Oil separator. -- Air-cooled aftercooler. -- "ELEKTRONIKON GRAPHIC" Digital controller & monitor system, with LCD Display, Touchpad, & Automatic restart after voltage failure.DE-INSTALLATION & SHIPPING PREPARATION NOTE: Compressor is currently ready to ship and can be loaded from a dock or ground level. It was fully operational without any issues when removed from service in April 2024.
ATLAS COPCO - GA 65, ...Rotary Screw Compressor with Air Dryer 73.4 HP - 1,755 RPM Motor, totally self-contained, single-stage rotary screw air end; approx. 320 CFM at 132 PSI rated operating pressure, max. modulation pressure 135 PSI.Standard features include: -- Inlet air filtration. -- Oil injected lubrication, -- Motor starting control system. -- Air cooled after-cooler, moisture separator and drain trap.Operator Display Panel with: -- Pressure gauges, control mode selection, remote & automatic start, and hour meter.Includes:INGERSOL RAND "TS 325" Air Dryer wired on 230 Volt single-phase.Total operating hours: 52,774.
ATLAS COPCO FD 610 A FS CSA/UL 1,293 CFM Cycling Refrigerated Compressed Air Dryer – New, Never UsedSpecifications: -- Max. compressor air pressure 14 bar (203 PSI). -- Ambient temperature 0° - 40° C (32° - 104° F). -- Refrigerant type R410A. -- Refrigerant pressure 33 - 43 bar (479 - 623 PSI). -- Air-cooled.Equipped with: -- "ELEKTRONIKON GRAPHIC" Digital controller & monitor system, with LCD Display, Touchpad.SHIPPING PREPARATION NOTE: Compressor is new, never used, nor installed. It is currently ready to ship and can be loaded from a dock or ground level.
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
AUTO-V-GROOVE AVG-48 MFT UNIVERSAL V-GROOVER: -- Specifications:(1) Head automatic cross & linear V-Groover, 48" max. material width on cross-groove,Unlimited length for linear grooving, 1-1/4" max. material thickness. -- Features:(1) 10 HP - 3,600 RPM Motor, 30 mm dia. belt driven precision cutter arbor, 3-1/4" max. cutter width.2 HP Hydraulic feed motor for infinitely variable crosscut feed speed from 0 - 50 FPM & 0 - 60 FPM for linear feeding.Heavy-duty double belt feeder assembly for linear grooving. -- Includes: Adjustable pneumatic material hold-down bar.(1) 84" x 24" Main table, (1) 20" x 58" auxiliary table, (1) large 96" long floating table on rails. -- Complete with: Automatic tape applicator (12" max. dia. tape roll), manual quick crank tape applicator positioning system. -- Options Include: An assortment of V-Groove cutters as pictured.Actual Model is AUTO-V-GROOVE AVG-48-M/FT.