Biomass Equipment For Sale

Complete Player Design Drying System - (2) Touch Screen Controllers - (1) PLC Control Box - (1) 12’ X 20’ Burner – 25 million BTU capacity with tempered sight glass that can run green chips/dust - (1) Burner Auger , Gearbox, and Motor - (1) Burner Blower Fan Assembly and Motor - (1) Player Single Pass Insulated Dryer Drum (12x50), 8” T section track, 28” Trunnions, Drive lubrication system, Sprocket, Chain and Gearbox / Motor (Drum rated for output material volume of 16,000 lbs per hour) - (1) Air Pro 48” Overhung Fan Assembly (ID Fan) (No Motor) ---- (Part# 12113601, Type-IERS615, Serial# 21136,) - (1) 200 HP motor for ID Fan - (1) Beck- Damper Adjustment Arm/Gearbox (ID fan comes with opposed blade inlet damper with a 300 ft-lb Beck actuator and armature) ---- (Model 11-209-155212-04-01---- 120V 1PH / 110VA ) - Piping and dampers for piping - Missing approximately 20’ of Dryer Drum Discharge piping - Missing approximately 20’ of Dryer Drum Recycle piping - System was rated at approx 9.25 Tons/hour

Portage & Main Outdoor Wood Stove W/ Wood Chip Feeder

2014 CHIFTAIN POWERSCREEN 1,848 HOURS GOOD SCREENS GOOD BELTS CATERPILLAR ENGINE VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2006 POWERSCREEN CHIEFTAIN 1400 -8785 hours -Hydraulic folding conveyors for quick setup -Screen walkways and access ladders for easy maintenance -Drop-down tail conveyor for screen media changes -Radio-controlled tipping grid -Integrated high-capacity variable-speed belt feeder -Grease-filled 4-bearing,2-deck screenbox -Impressive 400 TPH capacity -Applications Sand & gravel, Blasted rock, River rock, Topsoil, Composted materials, Wood by-products and more!

2022 Powerscreen Warrior 1200 -366 hours -12x4 screen box -No DEF Turn key unit like new!!!

2016 Powerscreen Warrior 1800 -2400 hours -4.4 Engine -16x5 screen box Clean machine

2019 Powerscreen Warrior 1800 -3600 hours -4.4 engine -16x5 screen box -Repainted and belts done

2001 Powerscreen 725 Trommel Screen, Equipped with Remaned Deutz 100 HP Turbo Diesel, 1000 Hours, Used 1/2" Screen Cloth, New Sticky Belts, All New Brushes, New Tires, All New Radial Stacker Motor, Ready for Work. Weight 55,116 lb Transport length 638" Transport width 108" Transport height 158" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

48" Precision Chipper with 125 HP motor, top discharge, manual starter, vibrating infeed. Paper plant quality chips. Knife grinder is available, also have a stationary Morbark 5x5-ft rotary chip screen and chip blower.

MLS Number 10237206 Precision Husky ProGrind 4000 Tub Grinder 4092 Hours 500 HP Cat 3406B engine Loader with cab

2001 PRECISION HUSKY PROGRIND 1000 TUB GRINDER REDUCED 275 HP New Fixed Teeth New Auger Motors Good Tires Runs Well

1996 Precision Whole Tree Chipper 21" Capacity 700 HP Cummins KTA Twin Turbo Needs Clutch AC Heat Good Feed Rollers Disc Wheel Completely Rebuilt New Anvil New Wire Plate Husky 235 Loader 52" Rotobec Grapple PRICE REDUCED

Precision Husky 23 Chipper Needs engine Has Cummins KT19 650HP

The seller has confirmed that this 96" Precision chipper is in good working/running condition and is ready to load. This was not heavily run. This came out of a chip plant in WA. Model 96.27 - Horizontal feed - Side discharge - 4-Knife whole log chipper - 8" thick chipper dissc - Built in disc brake - Extended front shaft for hydraulic starter - Hydraulic starting motor - Side discharge pipe with motorized outlet adjustment - 27" maximum log diameter - Many spare parts and knives included - Average production rate: 125 tons per hour - No hydraulic pump - No motor - an 800HP one can be added for additional cost though... The photo's show the optional extended shaft and hydraulic starting motor which is a special feature....

Precision 58” (6) Knife Chipper

Complete chip plant includes: - The infeed is 12’ above ground level. They were feeding it one log at a time with a shovel. - There is a single chain 12” wide leading to the debarker. - The debarker is a Salem 20” ring debarker with mcdiarmond controls. - From the debarker it goes through I think is a metal detector. It’s is enclosed, 8’ long with a belt conveyor. - 75’ of 3-strand chain that reduces to 2-strand chain for 35’ then goes to another 2-strand chain for 12’ then goes into the chipper. - The chipper is a Precision with 2- 400 hp high efficiency 3 phase motors. - From the chipper the chips drop onto a 42”x50’ inclined belt that leads to the 2 deck screen. The screen is 92”x20’ - The waste goes on a 9”x20’ incline belt and dropped into a truck. - The chips go out on a 3-strand 100’ conveyor (strands are 14” wide) to a radial stacker for loading trucks. The stacker belt is 42”x65’ - Chips can be redirected to blower unit system that will transport them to a rail siding to so they can be loaded into a rail area. It starts out with 75’ of 12” pipe running on the ground. Then it sweeps straight up to a height of about 24’ and goes 150’ to a siding across the county road. The chip loading facility is intact. - The hog is located back by where the logs are loaded onto the chain going to debarker. Here’s a list of the conveyors going back to the Kockums hog. It has a 24”x36” opening at the top. - Conveyors: 12”x100’, 12”x 25’, 12”x60’. All of these conveyors are 1 strand steel.

Precision 58" Chip Pac 6-Knives 72" Cyclone H-Type blower with dual load out chutes 6'x6' Screen 25' Vibrating Infeed with transition chute to chipper with fiberglass section and MDI metal detector

Precision 58" Chipper - Model 58-60-16 6 Knife 150 HP Motor

System includes: - Infeed System: Volumetric Feed Hopper, adjustable front gate, flow regulator, 43' Infeed Conveyor Belt System, flow regulator and transition chute. - Bagging System: Feeder with scraper, stand alone Volumetric hopper, manual feed system, chute for small bags, additional chute for bulk bags (supported by forklift), rolling system to fill either small or bulk bags, hot air sealer system (14"-28" wide bags) - Palletizing System: In-line turner conveyor, horizontal bag flattener, 8' gravity roller conveyor - System is set up for 575 V service