• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
15 Results Found for Band Resaw Viewing 1 - 15 of 15 results
PREMIUM LISTINGS
4 head Baker resaw, West Plaines 50 HP vertical cant sizer with programmable VFD on feed, Baker chopsaw with Pendu cant turners on rollcase, tilt-hoist, Curtis 10 HP compressor, Arrow regenerative line dryer with cooler, Dustek blower and baghouse with airlock and auger, 6’x35’ 2-strand deck with VFD drive. All starters and disconnects. Currently set up to chop, size, & resaw up to 16’ long. $98,500 608-606-9209
Equipment Location:Westby, WI
Leer Logging
608-634-4505
STANDARD LISTINGS
1994 Baker BBR-O 4-head resaw; well cared for and located in Northeast Mississippi near Alabama and Tennessee state lines
Equipment Location:Iuka, MS
Jourdan Lumber Co
662-423-5238
BAKER ABXX 40 HP Resaw, 12" H x 16" WSingle-Head Band Resaw can be used to cut boards, cants, or reclaim slabs, This Resaw can process a Timber up to 12" H x 16 W" in any desired length. Hydraulic variable speed from 0 - 95 FPM. -- This Model "ABXX" Resaw covers a large range of applications from small to large facilities, they are simple to operate and maintain with few moving parts and few adjustments. -- Complete With: 40 HP Electric Motor, 28" all-steel band wheels, 14'10" x 1" x 0.035" band saw blade, BAKER's exclusive Low-Profile Flat Guide System, spring blade tensioning and heavy duty construction. -- Included: Hydraulic infeed hold-down, extra wide hold-down wheel system.
Equipment Location:MIDWEST
Jim Reedy
800-374-5009 ext:455
2-Head, 30 HP TEFC motor, hydraulically driven feed from head motor, feed speed from 20 - 120 FPM, feed works with 12" wide rough top belt conveyor on self-centering rollers, and holddown wheel. -- Mechanical spring blade tensioning, 0.035" x 1" x 13-1/6' blades, 0.072" kerf. -- Baker flat guides for higher production, accuracy & extended blade life.
Equipment Location:MIDWEST
Jim Reedy
800-374-5009 ext:455
4-Head Re-Saw, each head equipped with a separate 30 HP TEFC motor and 3-sided feed works with: Rough-top belting, powered side feed rollers, non-powered hold-over wheels. -- Fully variable 20 - 120 FPM feed speed. The system is perfectly suited for resawing squares, and 3-sided cants into various thickness of lumber. -- Equipped with: Roughtop conveyor belt, powered side feed rollers, and non-powered holddown wheels, return conveyor, and air blade tensioning. -- Specifications: 12" Cutting height x 12 wide, uses 0.035" x 1" x 13'-2" band blades, creates less 1/16" kerf; 4" diameter, 500 CFM saw dust outlet per head recommended. -- Completely pre-wired with NEMA 12 enclosure with starter, disconnect and overload protection, and start/stop stations. -- Feedworks/Conveyor Hydraulic Motor driven by main motor. -- Features include: Air tensioning system; blade height adjustments can be made quickly via hand crank; Low-profile flat guides for maximum accuracy. 28" Dia. all-steel band wheels, with crown. -- Material is firmly held in place during the entire cut - the only continuous feedworks on the market today!
Equipment Location:MIDWEST
Jim Reedy
800-374-5009 ext:455
Baker single head band resaw w/20 hp. electric motor.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
BAKER A Single-Head Resaw -- Specifications: Max. 7" x 7" timber cap w/Slide Return; hydraulic variable feed speed rate 0 - 120 FPM; 6" Wide rough-top belted infeed conveyor for easy-to-produce lap siding. -- Few moving parts and few adjustments for quick mastery. -- Equipped with: 20 HP Electric motor, 28" dia, CNC machined all wteel band wheels; 1" or 1-1/4" x 13' - 2" x 0.035" hardback band blades; optional Diesel or Gasoline engines available. -- Includes: Operations manual, parts list & tool kit.
Equipment Location:MIDWEST
Jim Reedy
800-374-5009 ext:455
Baker BBR-0 6-Head Horizontal Resaw System, 13 Sets of Side Press Rolls, 6" x 35' Feed Through Belt Conveyor, (6) 20 hp, 1750 Rpm Drives, Air Bag Tension, Push Button Control, S/N 95-1486
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Baker 3 Head Band Resaw with Return Model BBR-O, 20HP Electric Motors, S/N 95-1256
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Baker C 4 Head Resaw Early to Mid 90s 6" w × 12" h capacity 20hp 3ph 480v motors on resaw heads 10hp 3ph 480v VFD 20-120 fpm Uses 1" × .035 × 13'2" blades Saw is in overall good condition and ready to go to work
Equipment Location:Colorado
Mitch Stevens
828-773-6986
BAKER BBR-O (AX) Horizontal Band Resaw w/Powered InfeedBaker Single Head Re-Saw with 7" wide x 7" high cap.;Specifications: -- 1/4" - 4" Cutting height; 20 HP TEFC saw motor. -- 28" CNC machined dynamically balanced all steel band wheels. Spring blade tensioning system. Feed System: -- Powered infeed belt tilts 0° - 10°, variable speed from 20 - 120 FPM controlled by a hydraulic flow valve. -- Complete with: 5-1/2" Wide rough top conveyor belting with powered top hold down belt; 4" dust outlet (500 CFM). -- Recommended blade (not included): 0.035" x 1" x 14'-2" Hardback.
Equipment Location:MIDWEST
Jim Reedy
800-374-5009 ext:455
BAKER A Single Head Re-Saw w/ReturnBaker Model "A" ReSaw with Turnaround, best one-man ReSaw ever made;Specifications: -- 20 HP TEFC motor, 6" wide x 7" high material cap. or 8" wide x 4" high above the blade with conveyor set a 0°. Equipped with: -- Spring infeed holddown, variable speed controlled by a hydraulic flow control valve, tilting conveyor, hydraulic feed drive via a 2 HP pump motor. -- 28" Steel bandwheels; features BAKER'S exclusive low profile flat plate guide system w/rear rollers. Includes: (90) Brand new bands.
Equipment Location:MIDWEST
Jim Reedy
800-374-5009 ext:455

Baker 3 Head Band Resaw

Call for Price
3 Head
Equipment Location:VA
Pallet Machinery Group
540-644-9220

Baker 4 Head Band Resaw

Call for Price
4 Head , return belt to go back on it. It would need all new guides for each saw, and 1 motor. Located in Pennsylvania
Equipment Location:VA
Pallet Machinery Group
540-644-9220

Baker Band Resaw

Call for Price
Baker 4 Head Bandsaw. 7.5HP.
Equipment Location:MN
Pallet Machinery Group
540-644-9220