• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
105 Results Found for Air Compressor Viewing 1 - 20 of 105 results
RECENTLY ADDED
STANDARD LISTINGS
AIR AMERICA TOP MOUNT 60 GALLON 6HP AIR COMPRESSOR
Equipment Location:Yuma, TN
LPS Equipment & Acquisition Co.
731-986-4351
Dynamic Action Balanced Vibrating Conveyor 28' x 36" Bottom with Motor and Drive. C-1119, 7/8" Stroke
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Ingersoll-Rand Air Dryer HG75 S/N 145G418
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Air King Air Compressor QS 350A, 75HP Motor
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
AR 250 max cfm 250 PSI 200 460V
Equipment Location:SOUTH, AL
EX-FACTORY INC.
704-841-2001
AIRTEK AR 500 Refrigerated Air Dryer. -- Approx. 500 SCFM at a max. of 300 PSI, 38° pressure dew point; uses "R-22" Refrigerant, exchanger, centrifugal condensate separator; powder-coated finish. -- Equipped with: Gauges for discharge pressure, refrigeration liquid temp., refrigeration suction temp., ambient temp., inlet compressed air temp., outlet compressed air pressure, differential air pressure, inlet compressed air pressure, and outlet compressed air temp. -- Complete with: 2" NPT Pipe connections, 1/4" electronic drain valve.
Equipment Location:WEST COAST
Jim Reedy
800-374-5009 ext:455
Airtek Twin Tower Air Drier
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
50 HP 200 PSI
Equipment Location:SOUTH
Jim Reedy
800-374-5009 ext:455
Atlas Copco 50HP Screw Type Air Compressor
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Atlas Copco GAU 707 150 PSI Screwair
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Atlas-Copco FD345 Air Dryer S/N 300197
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
ATLAS COPCO GA-55 Rotary Screw Air Compressor. -- Equipped with: 75 HP - 1,755 RPM Motor, totally self-contained, single stage rotary screw air end, 267 CFM at 125 PSI rated operating pressure, max. modulate pressure 135 PSI. -- Complete with: Inlet air filtration, oil injected lubrication, motor starting control system, air cooled after-cooler, moisture separator, and drain trap. -- Includes: "ELEKTRONIKON" Operator display panel with: Pressure gauges, control mode selection, remote & automatic start, and hour meter. -- Air-end rebuilt and control upgraded. (53,299) Loaded operating hours.
Equipment Location:MIDWEST
Jim Reedy
800-374-5009 ext:455

Boge S100 Air Compressor

Call for Price
Boge compressors S-100 100HP S/N 50475
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
CAM-WOOD AC-100120 Piston Air CompressorHeavy Duty unit with a 10 HP induction motor.Features & Specifications: -- 34.2 CFM @ 90 PSI, Splash lubricated cast iron 2-stage pump. -- Automatic start/stop operation. -- 120-Gal. horizontal tank that meets the ASME standards. -- Manual tank drain & pressure gauge. -- Deep finned after-cooler. -- Fully enclosed belt guard and ON/OFF pressure switch. -- Deep finned cylinder head for cooling and replaceable air filter/silencer. -- Durable painted finish for years of service under the worst conditions.
Equipment Location:WEST COAST, AL
EX-FACTORY INC.
704-841-2001
CAM-WOOD AC-5080 Piston Air CompressorCompact unit with a 5 HP induction motor.Features & Specifications: -- 18 CFM @ 90 PSI, Splash lubricated cast iron 2-stage pump. -- Automatic start/stop operation. -- 80-Gal. vertical tank that meets the ASME standards. -- Manual tank drain & pressure gauge. -- Deep finned after-cooler. -- Fully enclosed belt guard and ON/OFF pressure switch. -- Deep finned cylinder head for cooling and replaceable air filter/silencer. -- Durable painted finish for years of service under the worst conditions.
Equipment Location:WEST COAST, AL
EX-FACTORY INC.
704-841-2001
50HP Gardner Denver Screw Air Conpressor
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
CAM-WOOD AC-7580 Piston Air CompressorCompact unit with a 7.5 HP induction motor.Features & Specifications: -- 22 CFM @ 90 PSI, Splash lubricated cast iron 2-stage pump. -- Automatic start/stop operation. -- 80-Gal. vertical tank that meets ASME standards. -- Manual tank drain & pressure gauge. -- Deep finned after-cooler. -- Fully enclosed belt guard and ON/OFF pressure switch. -- Deep finned cylinder head for cooling and replaceable air filter/silencer. -- Durable painted finish for years of service under the worst conditions.
Equipment Location:WEST COAST
Jim Reedy
800-374-5009 ext:455
CHICAGO-PNEUMATIC QRS 15.0 Compressor w/Dryer & TankSpecifications & features: 15 HP, 51 CFM @ 150 PSI; Low Sound Enclosure, QRS (Quiet Rotary Screw), quiet design.Features: Quiet operation, adjustable V-belt drive, full voltage starter, auto start/stop, moisture drain, safety shutdown, in-line dryer, air shutoff valve & safety relief valves, TEFC motor, UL & CSA approved controls.Equipped with: Refrigerated Air Dryer; 115V 60Hz 0.23Kw 1-phase, Sound Level (dBA) 69; Max Inlet Temp 40C; Max Ambient Temp 40C, Refrigerant Type R134A. 60-Gal. receiver tank with auto drain. (659) Total operating hours.
Equipment Location:NORTHEAST
Jim Reedy
800-374-5009 ext:455
COMPAIR CLASSIC 07 Rotary Vane CompressorSpecifications & features: 10 HP, 44 CFM @ 100 PSI; 8 bar (116 PSI) max operating pressure. -- Designed for indoor use with noise reducing enclosure and vertical, space saving, orientation. -- Engineered with Direct Drive for reduced maintenance costs and down time. -- Designed to be less than 74 db during operation. -- Actual model is 707CK07-008. -- (17,093.2) Total operating hours.
Equipment Location:WEST COAST
Jim Reedy
800-374-5009 ext:455
COMPAIR 6075WH Rotary Air Compressor75 HP Motor 325 CFM @ 125 PSI, Water cooledFEATURES: --Totally integrated package, single-stage asymmetrical rotary screw air-end. -- Triplex bearings for long life, --Efficient 3-stage air/oil separator @ 1 - 3 PPM. --Mounted on a formed steel base with vibration isolated sub-base, belt driven with automatic belt tensioning device, and leak resistant fittings
Equipment Location:EASTERN CDN
Jim Reedy
800-374-5009 ext:455