• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
62 Results Found for Air Compressor Viewing 1 - 20 of 62 results
STANDARD LISTINGS
AIRTEK AR 500 Refrigerated Air Dryer. -- Approx. 500 SCFM at a max. of 300 PSI, 38° pressure dew point; uses "R-22" Refrigerant, exchanger, centrifugal condensate separator; powder-coated finish. -- Equipped with: Gauges for discharge pressure, refrigeration liquid temp., refrigeration suction temp., ambient temp., inlet compressed air temp., outlet compressed air pressure, differential air pressure, inlet compressed air pressure, and outlet compressed air temp. -- Complete with: 2" NPT Pipe connections, 1/4" electronic drain valve.
Equipment Location:WEST COAST
Jim Reedy
800-374-5009 ext:455
50 HP 200 PSI
Equipment Location:SOUTH
Jim Reedy
800-374-5009 ext:455
ATLAS-COPCO GA-37 Rotary Screw Air Compressor -- Specifications: 50 HP - 216 ACFM at 125 PSI, single-stage rotary screw air-end & totally self-contained. -- Standard features: Inlet air filtration, oil injected lubrication, direct-on-line motor starter, and drain trap. -- Equipped with: Elektronikon Operator display panel, PLC controller, with pressure gauges, control mode selection, and hour meter. -- Actual model GA-37-FF.
Equipment Location:MTN/CENTRAL CDN
Jim Reedy
800-374-5009 ext:455
Boge compressors S-100 100HP S/N 50475
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
CAM-WOOD AC-100120 Piston Air CompressorHeavy Duty unit with a 10 HP induction motor.Features & Specifications: -- 34.2 CFM @ 90 PSI, Splash lubricated cast iron 2-stage pump. -- Automatic start/stop operation. -- 120-Gal. horizontal tank that meets the ASME standards. -- Manual tank drain & pressure gauge. -- Deep finned after-cooler. -- Fully enclosed belt guard and ON/OFF pressure switch. -- Deep finned cylinder head for cooling and replaceable air filter/silencer. -- Durable painted finish for years of service under the worst conditions.
Equipment Location:WEST COAST
Jim Reedy
800-374-5009 ext:455
CAM-WOOD AC-5080 Piston Air CompressorCompact unit with a 5 HP induction motor.Features & Specifications: -- 18 CFM @ 90 PSI, Splash lubricated cast iron 2-stage pump. -- Automatic start/stop operation. -- 80-Gal. vertical tank that meets the ASME standards. -- Manual tank drain & pressure gauge. -- Deep finned after-cooler. -- Fully enclosed belt guard and ON/OFF pressure switch. -- Deep finned cylinder head for cooling and replaceable air filter/silencer. -- Durable painted finish for years of service under the worst conditions.
Equipment Location:WEST COAST
Jim Reedy
800-374-5009 ext:455
CAM-WOOD AC-7580 Piston Air CompressorCompact unit with a 7.5 HP induction motor.Features & Specifications: -- 22 CFM @ 90 PSI, Splash lubricated cast iron 2-stage pump. -- Automatic start/stop operation. -- 80-Gal. vertical tank that meets ASME standards. -- Manual tank drain & pressure gauge. -- Deep finned after-cooler. -- Fully enclosed belt guard and ON/OFF pressure switch. -- Deep finned cylinder head for cooling and replaceable air filter/silencer. -- Durable painted finish for years of service under the worst conditions.
Equipment Location:WEST COAST
Jim Reedy
800-374-5009 ext:455
COMPAIR 6075WH Rotary Air Compressor75 HP Motor 325 CFM @ 125 PSI, Water cooledFEATURES: --Totally integrated package, single-stage asymmetrical rotary screw air-end. -- Triplex bearings for long life, --Efficient 3-stage air/oil separator @ 1 - 3 PPM. --Mounted on a formed steel base with vibration isolated sub-base, belt driven with automatic belt tensioning device, and leak resistant fittings
Equipment Location:EASTERN CDN
Jim Reedy
800-374-5009 ext:455
CURTIS RS50B Rotary Screw Air Compressor 50 HP EPAct energy efficient motor. -- V-belt driven pump with totally Totally Enclosed Belt Guard that produces 212 CFM @ 125 PSI -- Compact base mounted unit, Auto-Dual controller optimizes the use of the compressor. -- Complete with: Heavy duty intake filter, mult-stage oil speration system with, oil filter bypase system, radiatory stile air/oil cooler & rigid base with fork lift slots for easy removal and lifting to a comfortable working height for PM or repairs. -- Actual model # RS50B A-E B160
Equipment Location:WESTERN CDN
Jim Reedy
800-374-5009 ext:455
DAYTON 10 HP HORIZONTAL AIR COMPRESSOR10 hp DAYTON motor,approx. 60 CFM, reciprocating compressor pump, splash lubricated 2-stage cast iron pump.Equipped with: horizontal tank w/manual tank drain, automatic start/stop operation; oil level site glass, and pressure gauge.Pump with deep finned cylinder heads for cooling; Air filter/silencer.
Equipment Location:NORTHWEST
Jim Reedy
800-374-5009 ext:455
GARDNER-DENVER AIR COMPRESSOR S/N M99119 30HP
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
50HP Gardner Denver Screw Air Conpressor
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Hankiso International Air Dryer Model: HPRP400-460 Serial Number: H400A4600012126 Refrigerant Type: R134A 400 SCFM @ 100 PSI 460 Volts 3 Phase 60 hz 52" Tall X 51" Long X 28" Wide
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
INGERSOLL RAND RS30I-A125 40 HP Screw Compressor & Dryer w/Tank40 HP Motor, 184 CFM @ 115 PSI, totally integrated package. -- Specifications: Single-stage rotary screw air-end, max. modulate pressure 118 PSI; full sound enclosure keeps noise levels below (75) dBA. -- Equipped with: Microprocessor based control system, premium instrument panel, air-to-air 2-stage aftercooler, electronic stepper motor inlet air control, sealed SSR direct drive gear train, total positive lubrication system with spin-on filter. -- Control system: Finger touch membrane panel, LED diagnostic readout with (8) operating conditions, (12) programmable operating parameters, (4) fault warnings, and (11) fault shutdowns. -- Includes: INGERSOLL RAND D340INA500 Refrigerated Compressed Air Dryer, rated cap. 200 SCFM, MAWP 300 psig, 1 HP Compressor motor, 1/6 HP Fan motor, Touchpad control with LED screen & 400 Gal. Vertical Accumulator Tank.
Equipment Location:MID ATLANTIC
Jim Reedy
800-374-5009 ext:455
INGERSOLL RAND SSR EP 100 Rotary Screw Air CompressorSpecifications: 100 HP Motor, 446 CFM @ 125 PSI, totally integrated package, single stage rotary screw air end, max. modulate pressure 128 PSI; full sound enclosure keeps noise levels below 75) dBA. -- Equipped with: Air-to-air 2-stage after-cooler, electronic stepper motor inlet air control, sealed SSR direct drive gear train, total positive lubrication system with spin-on filter. -- Control system includes: STAR-DELTA Start system, standard gauges. -- Hour meter replaced in 2012 and currently reads (1,695) hours.
Equipment Location:MIDWEST
Jim Reedy
800-374-5009 ext:455
INGERSOLL RAND SSR-EP150 Rotary Screw CompressorSpecifications & Features: -- 150 HP Motor, approx. 370 CFM @ 125 PSI, totally integrated package, single-stage rotary screw air-end, max. modulate pressure 128 PSI; full sound enclosure keeps noise levels below (75) dBA. -- Complete with: -- Intellisys Microprocessor based control system, premium instrument panel, air-to-air 2-stage aftercooler, electronic stepper motor inlet air control, sealed SSR direct drive gear train, total positive lubrication system with spin-on filter. -- Control system includes: Finger touch membrane panel, LED diagnostic readout with (8) operating conditions, (12) programmable operating parameters, (4) fault warnings, and (11) fault shutdowns. -- Also available from same seller: SULLAIR 20-100H ACAC, 100 HP with (45,000) hours;...$ 9,900 & SULLAIR 16BS-75H ACAC with (35,000) hours;...$ 10,900 - Make offer for all three!
Equipment Location:EASTERN CDN
Jim Reedy
800-374-5009 ext:455
INGERSOLL RAND SSR-EP150 Rotary Screw Compressor -- Specifications: -- 150 HP Motor, approx. 743 CFM @ 125 PSI, totally integrated package, single-stage rotary screw air-end, max. modulate pressure 128 PSI; full sound enclosure keeps noise levels below (75) dBA. -- Complete with: Intellisys Microprocessor based control system, premium instrument panel, air-to-air 2-stage aftercooler, electronic stepper motor inlet air control, sealed SSR direct drive gear train, total positive lubrication system with spin-on filter. -- Control system includes: Finger touch membrane panel, LED diagnostic readout with (8) operating conditions, (12) programmable operating parameters, (4) fault warnings, and (11) fault shutdowns. -- Approx. (107,000) total hours, normal maintenance. Shut down 12/18 due to plant relocation.
Equipment Location:SOUTHEAST
Jim Reedy
800-374-5009 ext:455
Ingersoll-Rand 75HP Screw Compressor
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Ingersoll-Rand T30 with 10HP Motor
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
INGERSOLL-RAND T 30 2-Stage Reciprocating Air CompressorSpecifications and Features: -- 72 CFM, 10 HP motor -- Finned intercooler and rugged one-piece connecting rods; pressure switch start/stop, load-unload valve, air cooled after-cooler, oil safety shut-down switch. --Complete with: -- Automatic shut-down on low oil; water drain, magnetic motor starter. -- Actual model is T30 1003A
Equipment Location:NORTHEAST
Jim Reedy
800-374-5009 ext:455