Equipment For Sale

2018 Quincy Compressor Refrigerated Air Dryer 230V 1ph 60Hz

Quincy 75HP Screw Compressor Serial# 940351

Quincy QSI-500 100hp Screw Compressor S/N 917823 36,264 Hrs

QSI-500 100hp Screw Compressor S/N 95571 33,495 Hrs

Quincy Air Compressor

TWO (2)150 HP QUINCY ROTARY SCREW AIR COMPRESSORS MODEL # 740B S/N: 800170; AND MODEL # 650H S/N: 73861. Service center tested and ready to go.

50HP Quincy air Compressor Rotary Screw Air

Never started it so do not know if it works

QUINCY QSVB-25ANN2F VACUUM PUMP:25 HP "QSVB Series": 371 CFM, 29.9"HgV rotary screw vacuum; positive lubrication fluid pump; 3″ inlet and 2″ exhaust port. -- Equipped with:Modulating inlet valve; temperature regulating valve; high discharge temperature shutdown system with manual reset. -- Complete with:Control panel; electrical enclosure; gauges; exhaust separation system; spin on fluid filter; (2) magnetic motor starter kits as pictured. GREEN ONE MODEL #PKT; SERIAL #981113937. - GREY ONE MODEL #SK25; SERIAL #0101-2-SK25 KVAR54.NOTE: The Pump only has (6,935) total hours on the meter!

Quincy screw compressor, Model; QSI245ANA31A, Serial #; 94877, 50 hp electric power, 69,848 hrs, good working condition

RADER - Trailer Dumper with 30 ft. Tipping DeckComes with the following components and features: -- This unit was installed at the current location in approx. 1971 and is reportedly in great working order and condition. -- Previously used for Dumping Wood Chip Trailers. -- Professional rigging and loading is available. Decks are often extended for longer (53 ft.) trailers.

used Rader feeder/airlock, 25 x 30inch feeder, Rader 25" x 30" esw feeder, serial# PM 1217, pneumatic conveying adapter mounted to bottom of airlock (air swept) discharge pipe ( 18” & 19”)and stand, 5HP, 230/460 volt, RPM 1745, 184T frame, speed reducer: Falk model 4207J 25 gear drive- ration 24.99:1, used metal airlock, used metal feeder Rader metal wheel rotary feeder valve airlock speed reducer and motor, feeder body was repainted, will provide demonstration video during test run.

Rader 20" x 20" Airlock

Metal airlock feeder, rotary valve, Rebuilt or new?? 16" x 10", shaft diameter 2-1/8", motors available, The roter has 8 blades on it and each blade has a number on them-view photos for additional details, stored inside, Shipping Dimensions: 20" wide X 32" Long X 24" Tall, Weight 450 LBS., contact us for a freight rate.

Rader Air Lock

RADICON gear reducer: 100:1; 5 HP. Price $800.00. As-is/where-is. (Inv. # G-15).

Raimann KM310M Rip Saw 2 Moveable Blades

RAIMANN Model ASA 1650 II, Veneer Patcher.Specifications: -- 5HP gearmotor, drive conversion wit new clutch and motor. Strip type mechanical plug-feeder mechanism - cap.. of up to (40) Plugs/Min.; -- Thickness of veneer patchable 1/32" - 3/16" (0.8 mm - 4.76 mm). Profile P-34 dies in good condition. -- Table dimensions approx. 39" x 47" -- Throat distance from tool to back column 65" -- Table height 35" -- Tool sequence: Veneer patch is cut by the table die and scrap is ejected into discharge chutes, veneer patch blank is then positioned against the underside of the table die, plug punch cuts replacement veneer patch from underside and patch is inserted into the proper position. -- Reconditioned by experts. -- Overall size: 10' 8" (3,250 mm) Length x 67" (1,700 mm) height; approx. weight 12,000 Lbs (5,450 kG). --Option: Veneer Strip Feeder. Feeds standard strip widths continuously. Venturi vacuum cup strip feed mechanism. All pneumatic operation. 120 Volt/60 Hz controls.please inquire for price extra. --Actual model is RAIMANN Model ASA II 1650.

Raimann KM310 Rip Saw Per seller: The saw runs material. The variable infeed is stuck on one speed.

RAIMANN - KM-310, ...Gang (Multi-Blade) Rip Saw12-1/4" Max. width cap., 13-1/2" chain width, 50 HP - 4,200 RPM V-belt driven arbor.Features: -- "Quickfix Hydro-Quick" Arbor: Multiple Saw blades are mounted on the arbor, they slide up-and-down the arbor into position and lock into place by tightening the end of the arbor; no tools & no spacers required. -- Frequency controlled feed speed of 13 - 110 FPM, 2.2 HP feed drive, chain spikes every 3rd chain link, automatic chain lubrication.Specifications: -- 300 mm (11.8") Max. saw blade dia. with 80 mm (3.15") bore, 65 mm (2.55") dia. arbor. -- Provides 3" max. depth of cut with pressure shoe, 3-1/2" depth of cut without. -- Manual thickness adjustment of upper holddown rolls with indicator scale. -- 6" Throat depth to the right of blade; 7/8" min. strip width, 17-3/4" min. stock length.Equipped with: -- (4) Sets of top & bottom antikickback fingers. -- Extended infeed with additional bed roll, and adjustable infeed fence. -- Motor load meters and automatic STAR DELTA starting. -- Automatic over thickness shutoff on infeed and 7-1/4" dia. dust hood. -- (4) Laser lights.Also included: -- (6) Used blades.