Equipment For Sale

2010 Cooper End Dogging Scragg Mill. 6' to 16' Length Capacity, Operator's cab with joystick controls, scanning, computer controls, (2) 150hp Arbors, linear bearings for shifting saw husks, 56" inserted tooth blades, off- bearing drop belts, hyd system, electrical panel with starters, 3-way separator outfeed roll case

Complete mill that needs to be removed from the current location. Seller will not split up the operation. (2) Infeed Decks: - (2) 3-Strand Infeed Deck 24' Long - H82 Chain - 3-7/16" Shaft - (2) 10 HP Drives - 3-Strand infeed deck 60' Long Cut Off Saw: - 54" Saw - 20 HP Motor - Hourglass rollers - Hydraulic length stops - Diverter gate to debarker Debarker - Infeed Deck - Cambio 24" Debarker - 75 HP Main motor Scragg: - 5-strand Infeed, 20' Long - Copper Scragg: 30 HP Hydraulic package, variable speed cable feed works with pantograph arm, log positioning, 48" saws with 125 HP motors, (2) 18" 2-position slab conveyors, cab, 8'-16' length capacity, max log 22", largest cant 12"x12" - Outfeed sorting system to two edgers: 5-Stand lower deck, 4-strand hydraulic lift to gang edger Gang & Board Edger: - 10" Mainland Gang Edger: 200 HP Motor, 34" inserted tooth saws with 5/16" kerf - 6" x 50" Mainland Board Edger: 150 HP motor, 24" blades, self tailing outfeed conveyor Trim Saw: - 2-Saw Trimmer with outfeed Greenchain: - Camel Back Landing Transfer - 4-Strand x 26' Long - 4-Strand: 8'4" Decline transfer - 4-Strand 66' Greenchain

2010 USED Cooper end dogging scragg mill. 6' to 16' length and up to 24" diameter log capacity. Includes: Operator's cab with joystick controls, COOPER scanning, computer controls, 150hp arbors, linear bearings for shifting saw husks, 56" inserted tooth blades, off bearing drop belts, hydraulic system,3-way separator outfeed roll case,  electrical panel WITH starters. Spare parts included.  Still running and can be seen until February 28. 

Cooper Optimizer Gang Rip Saw Cooper Edger Both set up inline and ready to be removed.

2004 Cooper Scragg Mill

MLS Number 13476937 2010 Cooper Overhead End Dogging Scragg Mill Cuts 6-16ft lengths Control Cabinets and starters Cab with joysticks, scanning and computer controls linear bearings for shifting saw husks 56 inch circle saws Two 150 HP arbors Off bearing drop belts 3 way separator outfeed roll case Includes $25,000 in spare parts Removed from service February 28, 2025 Ready to load

COOPER Dropsaw Trimmer - 24' left hand trimmer. Cuts up to 8" thick and 24 feet long. 15 hp saw motors. Zero saw adjustable for desired overtrim. Saws every 2 feet from 6 to 24 feet. 11 lugged feed chains with even-ender. Hydraulic variable speed feed. Controls and console remain wired. Over dimensional for transporting 32' long x 11.5' wide x 10'3" tall.

1988 Cooper End Dogging Scragg Mill with 48" Diameter Blades & 125HP Motors S/N CM-6076. Out and ready to go.

2004 Cooper 16ft Enddogging Scragg S/N CM-6181

Cor Dus 12" x 5' Belt conveyor

Cor-Dus Custom Belted Live Rolls 12" x 12.5' With Motor and Drive.

Coral GAM/2C Dust Collector -- Free standing self-contained Collector; base mounted 5.5 HP - 3,420 RPM motor.Equipped with: -- (2) Upper filter bags; (2) large collector bags; approx. 3,500 CFM, 117 sq. ft. filter area; approx. 50 cu. ft. collection cap. -- Complete with: 12" Dia. inlet; mounted on steel fabricated base w/wheels.

In stock and ready to ship! Coral EuroDry Paint Booth - 3500-11771 CFM - 5'-16' Wide

New in the crate - Ready to ship! The ICON class dust system from Coral comes in 1-5 bag systems ranging from 1,400-3,800 CFM. - Easy installation! - Plug & Play setup - 3-10 HP Available!

In stock and ready to ship! ICON Pro Series from Coral - Integrated Fan - Easy installation - Plug and play! - 2900-3500 CFM - 5.5-7.5 HP

Brand new System - IN STOCK! Coral FM 10 Ready Dust System 5,000 RPM 10 HP 230 or 480 V

2019 Cord-King 27-40 -1600 hours -Deutz motor -4x rail with split hydraulic control -Indeed deck (not attached) 26” max cutting diameter -Last log holding flap -58 ton ram Adjustable wedge -1x 16 way wedge -1x 18 way wedge COMES WITH -Spare shanks, teeth and tools to replace -Spare conveyor strip, drive chains and many other spare parts included -Small conveyor and power unit to off load shake included Turn Key Unit !!!!!

2016 Cord King Model 44 Firewood Processor, Includes 16' Conveyor, ONLY 335 Hours, Cat 90 HP Diesel Engine, 12 Way Wedge, Operator Platform with Seat, Not an enclosed Cab Unit, Hydraulic Oil Cooler, Live Deck. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

100 HP 3 Phase Motor Helle Log Turner Infeed Table Outfeed Table 25HP Chip Blower

Corinth 36" 3 Head Block Carriage, Track,Cab, Control, T-Berry 214 Drive, Mellott #5 Log Turner & Meadows 2 Saw Vertical Edger.