Equipment For Sale

Newman M512 Planer Matcher - 4 Main Heads - Added 2 heads - Machine was working and in use when removed from service. Seller purchased used and never installed. - Machine was running 6x8 D logs for a cabin manufacturer - Infeed rollers

Newman S282 Planer

Newman S970 Planer 30" x 10" capacity 50 HP top/Bottom motors 5 hp feed motor straight knives with grinder

Newman 4 Sided Planer

6” x 18” capacity 15 HP feed 50-150 FPM 25 HP top head 40 HP bottom head new rubber drive wheels push button controls includes cutter grinder

NEWMAN Trimmer System. Model KNO 24. Will trim 8' to 16' with adjustable '0' saw. Trimmer includes 7.5 HP motors on each saw with aluminum wheel hold downs; saw blades; chain type waste conveyor in trimmer; electric variable speed feed chains. System includes: 5 strand lumber deck with 81X chain by 13' long with lumber stops; 4 strand tipple to discharge boards when raised; 6' x 5 strand board dealer with 5 dealer wheels to feed boards to trimmer; 25' long x 30" wide lumber belt under tipple; 30' x 24" waste belt from trimmer waste chain. NOTE: Equipment loaded on your truck and  located in Biscoe, NC. Price $28,900.00. OBO

Newman S-382 Double Head Planer (Straight Knives) w/Hydraulics & Controls S/N 15292

Newman S-382-HD Double Head Planer with Helical Heads & Hydraulic Power Unit

Newman K 2S Double End Trimmer

Newman Power Feed 24"x12' rollcase with spiral positioner, infeed to planer, electric variable drive

Newman 282 Wood Planer 18 inch wide planning capacity by 6 inch thickness Newman 6 row Quite-cut carbide cutterhead 50 to 75 percent carbide knife life remaining 40 HP 3600 rpm top head motor-DMD 25 HP 3600 rpm bottom head motor- DMD 15 HP hydraulic pump package Feed speeds : 40 to 150 feet per minute Rubber tire feed – one row in-feed and one row out-feed. Dust hood Carbide knife grinder and jointer Cleaned and tested

Newman G-200 Knife Grinder, (2) Available, Sharpens Both Planer & Chipper Knives, Good Condition

Newman S-382-HD Straight Knife Planer with Hydraulics & Controls S/N 14267

8 Head Drop Saw 40' x 14' 5 Strand lumber Deck (Infeed) 16' x 5' 5 Strand Lumber Deck (Infeed) 16' x 5' High 8 Strand Unscrambler (Infeed) 100' x 24" Scrap Conveyor (Outfeed) Drag Chain Underneath (Outfeed) 24" Roll Case (Outfeed) Electric Disconnects And Controls Optional 4 Strand Roof Top Transfer Optional 82' Of 5 Strand Lumber Dcck

Newnes 3HP HPU

Specially designed haunching machine for beaded face frames, picture frames and decorative cabinetry. This machine uses a specially designed 2-piece carbide insert adjustable cutter. -- The work piece is placed on the table and against the fence and the cutter travels in a vertical motion to achieve the precision cut. -- Any size cut width is attainable by adjusting the width of the cutter and indexing from the fence stops. -- TECHNICAL SPECIFICATIONS -- Motors: 1 @ 1.1 KW (1.5 HP), Voltage: 220/440V/3/60hz, RPM: 6,000 RPM @ 60 hz, Air: 6 Bar, -- TOOLING: Insert Carbide: Milling head 140 mm (5.5"), Height min: no min., width 1/6" (4.2 mm). Max Profile: Height 3.5" (88.9 mm), width no max. -- Machine Dimensions: L x W x H - 40" x 30" x 35". Machine Weight: 675 lbs. -- AVAILABLE OPTIONS (Call for Pricing): Tooling carbide insert head, additional set of inserts, additional flip stops, foot pedal control, left & right digital fence.

Multiple Spindles (2) 2HP motors 208/230/460

Model 27 A7 high-speed ring debarker with air seal ring. Ideal machine for feed speeds from 300-350 fpm or faster on small logs.

Nicholson A-5 22" Ring Debarker

Nicholson A5 Ring Debarker Ring already removed from the machine. May have a Cambio Indeed/Outfeed as an option