NORTHTECH - NT 400-XL, ...Double-Sided PlanerSpecifications: -- 16" x 6" Working capacity. -- 25 HP Top & 15 HP Bottom motors, V-belted to cutterheads (draws 70 Amps max.); min. stock thickness of 1/4". -- Equipped with: 6-Row Spiral Carbide insert knife cutterheads with 4-sided Carbide knives. -- Cutterheads: 5,000 RPM. -- Bearings: "Class 7" NKS brand. -- Slip clutch to protect drive chains. -- Feed works: 3 HP motor, 20 - 75 FPM; 1 HP motorized thickness opening from 0" - 6".Equipped with & Features: -- Digital controller thickness control via ball screw; encoder; Model "DP-525" Controller. -- Magnetic push button panel controls operation.NOTE: Planer has less than (300) hours on the clock since new!

NORTHTECH NT 400EL Double Head 16" PlanerHeavy Duty Chain Drive Series Double SurfacerSpecifications: --15 HP Top, 15 HP Bottom Head Motor -- Dual (6) Row Helical Cutterhead with four sided 15 x 15 x 2.5 mm Inserts -- 5,175 RPM solid steel cutterheads with Class 7 NSK bearings -- Cutterhead dimensions: 5” dia. x 16” long -- Operating decibel rating of 79 dbProduct Dimensions: -- Working thickness 10 - 155 mm (3/8” - 6-1/2”) 8 mm min. on request -- 13” Min. working length -- 16” Maximum widthFeed System: -- 3 HP Feed motor -- Carpet feeding spike system with (644) spikes -- Feed speed 25 - 85 FPMFeatures: -- 1 HP Elevation motor -- Mechanical variable speed -- Digital control panel with 3 amp meters -- Chrome bed plate 0.01mm (0.004”) thick -- Passline at 32” -- Amperage requirement: 230V / 115 AMPS, -- (2) 6” Dust ports requiring 981 CFM @ each point of extraction -- Automatic lubricating system with low level shut off -- UL/CE Certified electrical components -- Includes operator’s manual and parts book -- Net weight: 5,990 Lbs -- Machine / Packed weight: 5,990 Lbs / 6,195 Lbs -- Machine/Packed dimensions (L x W x H): 98” x 50” x 70” / 101” x 46” x 80” -- One year parts warrantyNOTE: All machines are tested stateside prior to shipment providing trouble-free start-up.

NORTHTECH NT 1000-50HCVS Single-Sided 40" PlanerSpecifications: -- 40" Planer, 40 HP main motor, Helical Head, Adjustable bed rollers 15 mm x 15 mm x 2.5 mm Carbide Insert cutters. -- The spiral cutterhead provides a high chip removal rate, superior surface finish and low noise. -- Powerful 40 HP cutterhead motor makes this planer ideal for heavy-duty planing and meets high production requirements. -- Variable feed speed is mechanical variable from 0 - 90 FPM. -- Power elevation of the feed bed with "727 M Digital Table Adjustment" for fast accurate, and convenient thickness setting. -- Extra heavy rib reinforced cast iron table, surface precision ground. Equipped with: -- (4) Powered steel bed rollers. -- (4) Upper rollers. -- (2) Powered corrugated infeed rollers. -- (2) Powered urethane outfeed rollers. -- Upper and lower limit switches for opening control. -- (4) Dual 50 mm jack screws for raise/lower bed movement; 12" max opening. -- 2 HP Elevation motor with manual adjust. -- Rear E-Stop for added safety. -- Dual 6" dust ports requiring 1,000 CFM @ points of extraction.

NORTHTECH NT-610EL Top & Bottom Planer:24" Wide x 7.5" thick capacity; 1/4" minimum thickness; 12" minimum stock length.Specifications: -- Cutterheads: 25 HP top head; 20 HP bottom head; 5,800 RPM on cutterheads; (6) row spiral insert cutterheads, Carbide knives 15 mm x 15 mm x 2.5 mm 4-sided -- Feed works: 3 HP variable speed feed with speeds from 20 to 75 FPM; 1 HP motorized raise and lower of bed; DP-525 digital thickness controller; Overhead carpet style feed system Equipped with & Features -- Sectional chip breaker; Hard chrome plated bed; Automatic lubrication for feed system; Amp load meter -- Dust Requirements: 3,800 CFM; (1)10" and (1) 7" dust outlet

NORTHTECH NT-450HC Double Head Surfacing Planer; 18" x 6" Opening, 20 HP top & 15 HP bottom motor.Specifications: -- Motors V-belted to cutter heads at 6,000 RPM, min. stock thickness 1/4". -- Carpet style infeed with nice "pointy" fingers, sectional chipbreaker and chromed tables. -- Equipped with: Spiral carbide insert knife cutterheads with (9) rows of (20) knives per row of 4-sided inserts, each with a slight arch (radius) for better finish work. bearings are "Class 7" NKS brand. -- Feed works: 20 - 90 FPM driven by 3 HP variable speed drive. -- 1 HP motorized thickness adjustment and opening from 0" - 6" opening.

NORTHTECH 24-HCVS-XL HELICAL HEAD PLANER 24" width capacity and can handle up to 7" thickness. -- 10 HP V-belted cutterhead motor, equipped with 3" Spiral Cutterhead with 6 rows of (24)15 x15 x 2.5mm insert knives (144 total knives) -- 1 HP Feed motor, variable feed speed 0 - 60 FPM -- Sectional infeed roller, sectional chipbreaker.1/8" Min. stock thickness, 4" min. stock length butted, 13" min. stock length not butted, 1/4 max. depth of cut, 21" x 27" powered table with digital position controller.Complete with: Magnetic motor controls and shavings hood.