CAM-WOOD Model SM-236U Moulder Feed Through 6-Head (B-R-L-T-T-U), working cap. 9" x 4-3/4"Specifications: -- Head sequence: Bottom 10 HP, Right 10 HP, Left 10 HP, Top 15 HP, Top 15 HP and Universal 7.5 HP motor. -- Max. (Min.) Working Thickness 4-3/4" -- Min. Working Length 9½" -- Feed Motor 7½ HP and Elevation motor 1½ HP -- Spindle Dia.: 40 MM with cutterhead speed of 6,000. Mechanical digital readouts for all spindle adjustments, as well as chip breakers and pressure elements. Tool cutting circles: vertical spindles 5" to 6.25" and top spindles 5" to 7". -- Variable Feed: From16 ~ 110 FPM with LED speed readout. Over-sized top and bottom rollers run synchronized, ensuring smooth feeding. The three independent section pneumatic pressures for the infeed rollers, in-process rollers, and outfeed rollers can be set with individual pressure allowing for consistent feeding. -- Universal spindle with 270° rotation from the left side. -- Includes: Infeed table 2M (6'6") with manual table lubrication ports. Side pressure roller at infeed; Hard chrome-plated table for maximum wear resistance. Full sound and safety enclosure and manuals.

CAM-WOOD SM-532L 5 Heads Through Feed Moulder5-Head (B-R-L-T-B), working cap. 12-1/2" x 6".Specifications: -- Max/Min working width 12-1/2" - 3/4" -- Max/Min thickness 6" - 5/16" -- Minimum length 9 1/2" -- Head sequence: Bottom 15 HP, right 15 HP, left 15 HP, top 25 HP and bottom 20 HP motor. -- All Horizontal spindle have outboard bearings -- Spindle dia. 50mm with cutterhead speed of 7,600 RPM. -- All spindles equipped with mechanical digital readouts, "Dual mechanical" readouts on left and top spindles. Mechanical readouts for pressure elements and chipbreakers; all chipbreakers and pressure elements with pneumatics. -- Feed works: Inverter driven 10 HP feed system with feed speeds of 28 - 98 FPM. (up to 120 FPM available)Infeed table 2M (6'6"), chromed tables and fences. Side pressure roller mounted at infeed. Features and complete with: -- Feed speeds ranging from 28' ~ 98' per minute are a standard feature. -- The full safety enclosure cover as chip guard and helps to reduce noises. -- Table surface is hard chrome-plated for maximum wear resistance. -- All manually adjusted turning parts are housed in dry bearings for oil-free lubrication. -- One piece cast iron machine frame and table is especially normalization heat treated for maximum stability and rigidity. -- Fence adjustment is quickly accomplished by a quick-setting lever. -- The three independent section pneumatic pressure for the infeed rollers, in-process rollers and outfeed rollers can be set with individual pressure allowing for consistent feeding results and outstanding effect. -- All control levers for the spindles are located at the front of the machine for convenient adjustment. -- Each spindle is provided with a mechanical digital readout, giving accurate adjustment. -- Vertical spindle adjustment up to 80 mm, allows to fit several tools on the vertical spindle, eliminating troublesome cutter change. -- Separate adjustment of vertical spindle and insert table, permits the table to be position extremely close to the cutterhead for added cutting stability. -- An individual motor drives each spindle and is separately mounted to eliminate spindle chattering during high speed running. -- Centralized lubrication system Available options: -- SM Automatic feed magazine -- DC Automatic digital control -- SM Knife setting stand

CAM-WOOD SM-623L Moulder, Feed Through 6-Head (B-R-L-T-T-B), working cap. 9-3/4" x 5-1/4". Head sequence: -- Bottom 10 HP, right 10 HP, left 10 HP, top 20 HP, top 15 HP, and bottom 20 HP motor. -- Spindle dia. 40 mm with a cutter-head speed of 7,200 RPM. All spindles with mechanical digital readouts. -- Feed: Variable speed of 26 - 119 FPM, with 7-1/2 HP feed drive motor. Powered feed rollers top and bottom. -- Infeed Straightening table 2M (6'6"), with side pressure roller and table lubrication pump. -- Dust outlet Diameters are 5" X 6" outlets. Includes: -- Hard chrome-plated fences and table, -- Operator/spare parts manuals, -- Centralized control panel, -- Sound and safety enclosure, -- Short stock feeding mechanism (9 1/2" min length), -- Power elevation (1-1/2 HP beam.)Options:Training and installation, tooling & rigging are optional. -- SM-KFST Knife Setting Stand ...$1,970.00The machine base is one piece coated from high-quality cast iron (FC-25) for maximum stability of the structure. Base is machined by CNC machine equipment to ensure the utmost working accuracy. Net weight 11,220 Lbs Shipping weight 12,300 Lbs.

CAM-WOOD SM-632 HS 6-Heads High-Speed Trough Feed Moulder(6) Heads (B-R-L-T-T-B), working cap. 12-1/2" x 6-1/4"".Specifications: -- Max/Min working width 12 " - 3/4" -- Max/Min thickness 6" - 5/16" -- Minimum length 9-1/2" -- Head sequence: Bottom 15 HP, right 15 HP, left 15 HP, top 20 HP, top 20 HP and bottom 20 HP motor. -- All Horizontal spindles have outboard bearings -- Spindle dia. 50 mm with cutterhead speed of 6,200 RPM. -- All spindles are equipped with mechanical digital readouts, "Dual mechanical" readouts on the left and top spindles. Mechanical readouts for pressure elements and chipbreakers; all chipbreakers and pressure elements with pneumatics. -- Feed works: Inverter driven 15 HP feed system with feed speeds of 20 - 260 FPM. -- Infeed table 2M (6'6"), chromed tables, and fences. Side pressure roller mounted at infeed. Features and complete with: -- Feed speeds ranging from 20' ~ 260' per minute are a standard feature. -- The full safety enclosure also works as a chip guard and helps to reduce noise. -- Table surface is hard chrome-plated for maximum wear resistance. -- All manually adjusted turning parts are housed in dry bearings for oil-free lubrication. -- One piece cast iron machine frame and table is especially normalization heat treated for maximum stability and rigidity. -- Fence adjustment is quickly accomplished by a quick-setting lever. -- The three independent section pneumatic pressure for the infeed rollers, in-process rollers and outfeed rollers can be set with individual pressure allowing for consistent feeding results and outstanding effect. -- All control levers for the spindles are located at the front of the machine for convenient adjustment. -- Each spindle is provided with a mechanical digital readout, giving accurate adjustment. -- Vertical spindle adjustment up to 80 mm, allows fitting several tools on the vertical spindle, eliminating troublesome cutter change. -- Separate adjustment of vertical spindle and insert table permits the table to be positioned extremely close to the cutterheads for added cutting stability. -- An individual motor drives each spindle and is separately mounted to eliminate spindle chattering during high-speed running. -- Centralized lubrication system Available options: -- Automatic Jointer for all (6) heads add: ...$45,600 -- Digital (electronic) display for X and Y axis for each head add $ 3,200 /per head -- NC Automatic positioning control system. This option consists of motorized adjustment of the head control from the main screen of the machine.This option include: -- 15" HMI (1000 memory setting), -- Servo motor positioning, Simple and easy to operate. -- Width and thickness quickly & auto set-up -- Tools management system -- Lateral chain feeder (quoted with customer material specifications) -- For 6 heads machine add $82,800 -- For 7 heads machine add $ 90,600

CAM-WOOD SM-632LX 6-Head Feed Through Moulder6-Head (B-R-L-T-T-B), working cap. 12-1/2" x 6".Specifications: -- Max/Min working width 12-1/2" - 3/4" -- Max/Min thickness 6" - 5/16" -- Minimum length 9-1/2" -- Head sequence: Bottom 15 HP, right 15 HP, left 15 HP, top 25 HP, top 20 HP and bottom 20 HP motor. -- All Horizontal spindles have outboard bearings -- Spindle dia. 50 mm with a cutterhead speed of 7,600 RPM. -- All spindles are equipped with mechanical digital readouts, "Dual mechanical" readouts on left and top spindles. Mechanical readouts for pressure elements and chip breakers; all chip breakers and pressure elements with pneumatics. -- Feed works: Inverter driven 10 HP feed system with feed speeds of 38 - 98 FPM. (up to 120 FPM available)Infeed table 2M (6'6"), chromed tables and fences. Side pressure roller mounted at infeed. Features and complete with: -- Feed speeds ranging from 20' ~ 98' per minute are a standard feature. -- The full safety enclosure covers as a chip guard and helps to reduce noise. -- Table surface is hard chrome-plated for maximum wear resistance. -- All manually adjusted turning parts are housed in dry bearings for oil-free lubrication. -- One piece cast iron machine frame and table is especially normalization heat treated for maximum stability and rigidity. -- Fence adjustment is quickly accomplished by a quick-setting lever. -- The three independent section pneumatic pressure for the infeed rollers, in-process rollers and outfeed rollers can be set with individual pressure allowing for consistent feeding results and outstanding effect. -- All control levers for the spindles are located at the front of the machine for convenient adjustment. -- Each spindle is provided with a mechanical digital readout, giving accurate adjustment. -- Vertical spindle adjustment up to 80 mm, allows to fit several tools on the vertical spindle, eliminating troublesome cutter change. -- Separate adjustment of the vertical spindle and insert table permits the table to be positioned extremely close to the cutterhead for added cutting stability. -- An individual motor drives each spindle and is separately mounted to eliminate spindle chattering during high-speed running. -- Centralized lubrication system Available options: -- SM Automatic feed magazine -- DC Automatic digital control -- SM Knife setting stand

CAM-WOOD SM-732 HS 7-Heads High-Speed Trough Feed Moulder(7) Heads (B-R-L-T-T- T-B), working cap. 111 13/16" x 6-1/4"".Specifications: -- Max/Min working width 11 13/16" - 3/4" -- Max/Min thickness 6 1/4" - 5/16" -- Minimum length 9-1/2" -- Head sequence: Bottom 20 HP, right 15 HP, left 15 HP, top 20 HP, top 20 HP, top 15 HP and bottom 15 HP motor. -- All Horizontal spindles have outboard bearings -- Spindle dia. 50 mm with cutterhead speed of 6,000 RPM. -- All spindles are equipped with mechanical digital readouts, "Dual mechanical" readouts on the left and top spindles. Mechanical readouts for pressure elements and chipbreakers; all chipbreakers and pressure elements with pneumatics. -- Feed works: Inverter driven 15 HP feed system with feed speeds of 20 - 260 FPM. -- Infeed table 2M (6'6"), chromed tables, and fences. Side pressure roller mounted at infeed. Features and complete with: -- PNEUMATIC LOAD INFEED SIDE PRESSUREWhile high speed feeding, the side pressure on infeed table ensures every timber close to the fence even under different width. It's convenient to adjust quickly. --OVER HEiGHT PROTECTIONIn case workpiece exceeds the rated maximum height, it will be restricted by the over height protection device provided at the workpiece infeed end. -- HYDRAULIC OUT-BOARD BEARING SUPPORT TOP AND BOTTOM SPINDLESpecially designed hydraulic supports on the top and bottom spindles assure maximum stability while performing high speed and heavy duty machining. -- PNEUMATIC LOAD SIDE PRESSURE WHEELS The front side air pressure wheel on left vertical spindle fully eliminates problem when feeding short or narrow stock not smoothly. The pressure plate is easy and quickly to adjust. -- PNEUMATIC LOAD TOP PRESSURE PLATEThe front pressure plate for top spindle is available to apply an air loading device ensuring maximum stability while performing high speed cutting -- CENTERAL LUBRICATION POINTThe lubrication point are located at the centralized plate for convenience. -- POWERED INFEED TABLE ROLLER The roller in the infeed table is powered, providing a smooth feeding effect for feed stock. -- VERTICAL SPINDLE AXIAL ADJUSTMENT UP TO 60MMIt allows fitting several tools on the vertical spindle, eliminating troublesome cutter change. The 60mm spindle adjustment provides full utilization for a single cutter. -- CENTRALIZED PRESSURE ADJUSTMENT• All pressure regulations for the entire pneumatic system are centralized at the front of the machine for added convenience in pressure adjustment, and sectional pressure adjustments for all pressure rollers ensure consistent pressure.• Clear numerical indicators are provided to correspond directly to the pneumatic mechanisms on the machine, allowing operators to make adjustments based on different processing requirementsAvailable options: -- Automatic Jointer for all (6) heads add: ...$45,600 -- Digital (electronic) display for X and Y axis for each head add $ 3,200 /per head -- NC Automatic positioning control sys

CAM-WOOD SM-623-HS 6-Head High-Speed Trough Feed Moulder(6)-Heads (B-R-L-T-T-B), working cap. 9" x 6-1/4".Specifications: -- Max/Min working width 9-3/4" -- Max/Min thickness 6-1/4" - 5/16" -- Minimum length 9-1/2" -- Head sequence: Bottom 10 HP, right 10 HP, left 10 HP, top 15 HP, top 15 HP and bottom 15 HP motor. -- Spindle dia. 40 mm (or by request) with cutterhead speed of 6,200 RPM. -- Feed works: Inverter driven, 10 HP feed system with feed speeds of 20 - 260 FPM. -- Infeed table 2 M (6'6"), chromed tables, and fences. Side pressure roller mounted at the infeed. Features and complete with: -- SM-237-DG where the last bottom spindle can be used for cutter head or saws with inverter RPM control -- HMI Touch Screen Control for all the head positions -- Automatic setting from 2nd to 6th heads, (2) axis positions and thickness control by servo control movement -- 200 sets of memory (Extendable) -- Feed speeds ranging from 20' ~ 260' per minute are standard specifications. -- Hard chrome-plated table for maximum wear resistance. -- Full enclosure safety hood reduces noise and completely prevents chips from splashing. -- Anti-impact plate for over-width and over-thickness protection. -- Oversize top and bottom rollers run synchronized, ensuring smooth feeding. -- FRP plastic steel safety guard features maximum durability and is impact resistance. -- The three independent section pneumatic pressures for the infeed rollers, in-process rollers, and outfeed rollers canbe set with individual pressure allowing for consistent feeding results and outstanding effect. -- The smooth initial feeding of the stock is achieved by the independently powered infeed rollers. -- Exclusively designed template inserted pressure plate suits various stock thicknesses and profile variations. -- A special pressure plate with table feeding roller design, provides smooth and precise cutting of dry and wetwood, reducing the possibility of material jams. -- All control levers for the spindles are located at the front of the machine for convenient adjustment. -- Vertical spindle adjustment up to 80 mm, allows fitting several tools on the vertical spindle, eliminating troublesome cutter change. -- Separate adjustment of the vertical spindle and insert table permits the table to be positioned extremely close to the cutterhead for added cutting stability. -- An individual motor drives each spindle and is separately mounted to eliminate spindle chattering during high-speed running. -- Centralized lubrication system Available options: -- Automatic jointer head for all (6) heads add ...$ 58,500 -- Siko encoder with digital display for all axis add ...$ 4,200 per head -- Automatic lateral chain feeder P.O.R.

DIEHL - TFM-68, ...4” x 8” 6-Head High Speed Jointed Moulder6-Head (B-R-L-R-T-B) with 8-5/8" x 4-1/2" capacity. Head sequence: Bottom 15 HP, Right 10 HP, Left 10 HP, Right 10 HP, Top 15 HP, and Bottom 20 HP motor.1st Bottom and 1st right side run at 3,600 RPM; all the other spindles run at 6,000 RPM utilizing the included Frequency Changer.Side heads tilt 35° inward and 5° outward. Specifications: -- Spindle diameter: Vertical 1-13/16"; Horizontal 2-1/8" dia. for top spindle only. -- Built-in straight & profile jointers on spindles 2 - 3 - 4 & 5. -- Variable feed speed from 20 - 150 FPM via 15 HP feed drive. -- Cardan Shaft driven. -- WAXLIT Pump and groove bed with groove cutters for 1st bottom. -- Air chipbreakers and feed roll tensioning. -- Starting panel and transformer included.Weight: Approx. 14,000 Lbs

DOUCET MFE-150-8 Lateral Chain FeederOPERATION: -- On the feed table, boards are automatically placed along the feed line by perpendicular strands of chains. A pneumatic system lowers chain carriage between each feed cycle, thus preventing unnecessary friction between the piece being fed and the reserve material. Boards are automatically driven in sequence by a combination of two powered wheels located under the material and two top pressurized wheelsSpecifications: -- 36 inch feed table length -- Moulding length capacity 3' to 8' -- Two bottom feed wheels made of steel, powered by electric motor with variable speed -- Torque control module on feed wheels VFD to maintain constant pressure without slipping -- Two top pressurized wheels, non-motorized -- Feed chains powered by electric motor with variable speed -- Interface relay to stop feeding cycle when moulder feed is stopped -- Adjustable reference lateral fence, ½" movement into slot, need tools to make setup -- Feed speed on chain up to 80'/min. and on wheels up to 150'/min

DOUCET MFE 300 Lateral chain feeder for moulders and optimizers -- 3'0" x 16'-0" working deck for material length 2'0" - 16'0"; width 2" to 9.5" and thickness 1/2" to 4". -- Feed system: Hydraulic variable speed 50-300 FPM with a 20 HP power unit. In-feed (4) roller accelerator; (2) top steel rollers and (2) bottom drive roller. Additional idler rollers along feed fence to support lumber during feeding. -- Chains: Transport length of lateral chain feeder 3'0". (8) strands of C2060 chains on pneumatic up/down device to release lateral pressure on board when feeding. -- Pedestal: Feeder controls mounted to pedestal with extended cable. Interface relay to stop feeder when moulder is stopped. -- Adjustments: Tool less adjustment handles for quick setups. Easy access to for thickness adjustments at front side of feeder. -- AVAILABLE OPTIONSOne (1) set of four (4) feeding wheels made of steel with hardenedsurface teeth $ 1 000.One (1) set of four (4) feeding flat wheels made of steel, 2" wide insteadof 1" for wide material feeding $ 500.One (1) set of four (4) feeding flat wheels made of steel 1" wide $ N/C.Guiding Tunnel between feeder and moulder,Standard Guiding Tunnel (4' long) $ 1 650.Standard Short Guiding Tunnel (32" long) $ 2 100.Complete Guiding Tunnel (4' long) $ 2 700.Complete Guiding Tunnel with adjustable fence (4' long) $ 3 800.Motorized Guiding Tunnel (4' long) on request.Additional chain transfer length capacity (up to a maximum of 6additional feet) For MFE-300-16 sold per foot $ 1 685. Note: More than 6 add. feet: price upon requestSteel plates between chainsFor MFE-300-16 $ 1 050.Platen chains recommended for softwood speciesFor MFE-300-16 $ 2 850.One (1) additional chain for shorter material down to $ 1 750.18" min. lengthPressurized lateral guide with roller bearing end $ 1 400.Powered lateral guide with roller and side guides on request.Custom working height on request.

Used for the accurate radius measuring of cutterheads; allows for speedy tool changes on moulder. 12" Long x 6-1/2" base, 1-1/2" dia. arbor will handle up to 9-1/4" long tool body. -- Digital caliper rides up and down on precision machined octagonal bar. -- Options: T-bushings for 1-13/16" dia. & 40mm dia., please specify.

KENTWOOD M 509 S Feed Through Moulder5-Head (B-R-L-T-B), working cap. 9.05" x 4.9". -- Head sequence: Bottom 10 HP, right 7.5 HP, left 7.5 HP, top 15 HP and bottom 10 HP motor. Mechanical spindle brakes. -- Spindle dia. 1.5" with cutterhead speed of 6,000 RPM. All spindles equipped with mechanical digital readouts. Mechanical readouts for pressure elements and chip breakers. -- Minimum working lengths: 23.5" min. individual piece, 10.2" min. end to end pieces -- Feed works: Inverter-driven 5 HP feed system with feed speeds of 18 - 80 FPM. Infeed Complete with: (1) powered roller in the table. -- Infeed table 2M (6'6"), chromed tables and fences and (1) powered roller in the table. -- Includes: Central lubrication, manual table lubrication pump, side pressure roller mounted to infeed table, Heads, and assorted Knives.

LEADERMAC LMC 518 S 5-Head (B-R-L-T-B) LEADERMAC "LMC" Feed Through Moulder, "SMARTMAC" with a working cap. of 7" x 5". -- Head sequence: Bottom 7.5 HP, right/left 15 HP, top 15 HP and bottom 10 HP motor. -- Spindle dia. 40 MM with cutterhead speed of 6,000 RPM. All spindle adjustments except 1st. bottom head with mechanical digital readouts. -- Features: Pneumatic receding chipbreaker for top spindle. Mechanical digital readout for chipbreaker and pressure element. -- Feed system: Variable speed 20 - 85 FPM, by a 4 HP motor; Short stock driven feed roller at right spindle. Side pressure roller at infeed mounted to infeed table. -- Table plates and fences hard chromed, inside fences 32 mm height for side work profiles. -- Infeed table 2 M (6'6") infeed straightening table, manual table lubricant pump. -- Equipped with: Central lubrication system, full sound & safety enclosure, and supplied with operator tools & manuals. -- Includes: (1) Set of cutterheads with reference engraver for first bottom spindle. -- Electrics conform to UL/CSA & CE specifications.

LEDERMAC 523S "SMARTMAC" Feed Through Moulder;5-Head (B-R-L-T-B) with a working cap. 9" x 5". -- Head sequence: Bottom 7.5 HP, right/left 15 HP, top 15 HP and bottom 10 HP motor. -- Spindle dia. 40 mm with cutterhead speed of 6,000 RPM. All spindle adjustments except 1st bottom head with mechanical digital readouts.Features: -- Pneumatic receding chipbreaker for top spindle and Mechanical digital readout for chipbreaker and pressure element. -- Feed system: Variable feed drive 20 - 80 FPM, by a 7.5 HP with Digital Speed Readout. Short stock driven feed roller at right spindle. Side pressure roller at infeed mounted to infeed table. -- Table plates, fences and chipbreaker shoes hard chromed, inside fences 32 mm height for heavy side work profiles. -- Infeed table 2 M (6'6") infeed straightening table, manual table lubricant pump.Equipped with: -- Central lubrication system, full sound & safety enclosure, operator tools & manuals.Includes: -- (1) Year warranty; -- 1st bottom with spiral Carbide cutterhead + (4) Cutterheads included, serrated back dual angle 10° / 20° with machine. -- Electrics conform to UL/CSA & CE specifications. -- (1) LMC 0026LJ Cuttehead setting stand for measuring radial diameter before and after grindding, to determine change in radial diameterOptions: -- Easy Setwork wich includes Schneider 5.7" HMI touch screen control and motorized adjustment of the near side and top heads and feed beam with memory for 200 profiles Add. $ 4,295

LEADERMAC HYPERMAC 530 C COMPACT Moulder Feed Through 5-Head (B-R-L-T-B), working cap. 12" x 6" capacity. -- 1 Piece – Extra Heavy Cast Iron Main Frame. Specially heat-treated for maximum stability and minimum vibration78" (2m) long Adjustable Infeed Table and Fence (each adjustable .4") -- Head sequence: Bottom 25 HP, Right 20 HP, Left 20 HP, Top 30 HP, and Bottom 25 HP motor; spindles are manufactured from SCM-440 tool steel (Mitsubishi-Japan) with special heat treating to HR 55C Hardness fitted with-all spindles equipped with mechanical digital readouts. -- Spindles: dia. 1-13/16" with a cutter-head speed of 7,200 RPM., -- Precision Hydro-loc Outboards for horizontal (Top/Btm.) heads, -- Spindles 3 & 4 have Dual Siko Counters on the Radial Set (for fastest head setup -- Chip-breaker and pressure elements pneumatic; include mechanical digital readouts for accurate positioning. -- Powered rise and fall to extra heavy feed support beam by 1 HP / 0.75 kW motor; upper support beam is supported at both the In-feed and Out-feed ends on 2 large columns for best most rigid upper beam support. -- All feed rolls and pressures move with top beam rise and fall, including safety switches at extreme points. -- 8 Top Driven Feed Roll Shafts (each equipped with Multiple 2" wide rolls that can be quickly spaced/positioned or removed as desired). -- (2) Full-width Driven Bottom Bed Rolls, (2) Piece Full-width Bottom Driven In-feed Roll Bottom Rolls have quick up-down adjustment by cam type lift system -- Feed: Inverter drives 5 HP feed system with feed speeds of 20 - 80 FPM. Electronic Digital Speed Readout, Inch forward and reverse to feed with duplicate control at top head position for fast easy setting -- Infeed/Tables: 1.2 M (4'0") in-feed table .012"-.014" chrome thickness chromed tables and fences, central lubrication, automatic table lubrication, (1) short stock attachment. -- Includes: Lift up sound and safety enclosure including safety interlocks and good strobe-free lighting inside the enclosure. Central Lubrication System to all main slides from front of moulder(1) set of cutter-heads, manuals, set up tools and (1) rebuilt top spindle. -- Options Included, Cutter- head measuring stand Included, Precision Hydro-loc Outboard Bearings and Support for horizontal (Top/Btm, heads $ Included. Pneumatic Locks on the Outboard Supports of the Top Head in lieu of Manual Locks are Included. -- Note – With 7200 RPM Spindles running unjointed (Single Knife Finish) you will realize a 20% increase in productivity.Pneumatic Roller Side Pressure Unit between the 1st bottom head and the Fence side head in lieu of spring-tensioned holdover for best-controlled operation & variable pressure to material going through the side heads. Included, Pneumatic Top Head Chip breakers with Independent pressure controls to each position $ Included, top Head Chip Breaker Plates are Hard Chromed & Grooved for Safety Purposes $ Included, Axial Adjustment of the las

LEADERMAC LMC 530P (Platinum) Moulder Feed Through 5-Head (B-R-L-T-B), working cap. 12" x 6". -- Head sequence: Bottom 15 HP, right 10 HP, left 15 HP motor, top 20 HP and bottom 20 HP motor. -- Spindles: Spindle dia.1-13/16" with cutterhead speed of 7,200 RPM. Spindles (all) equipped with mechanical digital readouts, Digiset readouts for left and top spindles. All horizontal spindles with hydro-loc outboard bearings.Chipbreaker and pressure elements include mechanical Digital readouts for accurate positioning. Chipbreakers at left and top spindles with pneumatic pressure. -- Feed works: Invertor drive 5 HP feed system with feed speeds of 20 - 82 FPM. 2 M (6'6") infeed table, Full width driven adjustable infeed & outfeed rollers in machine bed -- Features: Central lubrication, automatic table lubrication, chromed tables and fences, swing-away intermediate short piece gearbox opposite left spindle, lateral side pressure roller at infeed gate, feed jog/inch forward at top spindle and operator tools & manuals. -- Includes: (1) Set of full width tooling (spiral carbide tool on first bottom) and grease gun for outboard bearing lock. -- Many additional options available to tailor the machine to your specific requirements. -- Training and (12) months Warranty

LEADERMAC 623C Moulder Feed Through 6-Head (B-R-L-T-T-B), working cap. 9-1/16" x 6" capacity. -- Head sequence: Bottom 10 HP, right 10 HP, left 10 HP motor, top 15 HP, top 20 HP, and bottom 15 HP motor. -- Spindle dia. 1-13/16" with cutterhead speed of 6,000 RPM; spindles (all) equipped with mechanical digital readouts, Digiset readouts for left & top spindles. -- Chipbreaker & pressure elements include mechanical digital readouts for accurate positioning; chipbreakers at left & top spindles with pneumatic pressure. -- Feed works: Inverter driven 5 HP feed system with feed speeds fom 20 - 100 FPM. -- Equipped with central lubrication and automatic table lubrication. -- 2 M (6-1/2') infeed table, chromed tables, and fences. -- Swing-away intermediate short piece gearbox opposite left spindle. -- (3) Full width driven rollers in machine bed, lateral side pressure roller at infeed gate. -- Feed jog/inch forward at top spindle and maintenance tools & manuals. -- Includes: (1) Set of full width tooling (spiral carbide tool on first bottom) and corrugated 12/20° heads; operator manual and parts book.

LEADERMAC 623P PLATINUM Feed Through Moulder; 6-Head (B-R-L-T-T-B), "PLATINUM" working cap. 9-1/16" x 6". -- Head sequence: Bottom 15 HP, right 10 HP, left 15 HP, top 20 HP, top 20 HP and bottom 20 HP motor. -- Spindle dia. 1-13/16" (40mm and 2-1/8" also available) with cutterhead speed of 8,000 RPM. -- All spindles equipped with electronic digital readouts, "Dual mechanical" readouts on left and top spindles. Mechanical readouts for pressure elements and chipbreakers; all chipbreakers and pressure elements with pneumatics. -- Feed works: Inverter driven 5 HP feed system with feed speeds of 20 - 100 FPM. -- Infeed table 2M (6'6"), chromed tables and fences. Side pressure roller mounted at infeed. -- Includes: Central lubrication, short stock attachment, automatic table lubrication pump, side pressure roller mounted to infeed table and sound enclosure. (1) set of heads.

LEADERMAC 630 C Moulder Feed Through 6-Head (B-R-L-T-T-B), working cap. 12" x 6" capacity. -- Head sequence: Bottom 15 HP, right 10 HP, left 15 HP motor, top 20 HP, top 20 HP and bottom 20 HP motors. -- Spindles: Spindle diameter 1-13/16" with cutterhead speed of 7,200 RPM. Spindles (all) equipped with mechanical digital readouts, digiset readouts for left and top spindles. All horizontal spindles with hydro-loc outboard bearings. Chipbreaker and pressure elements include mechanical digital readouts for accurate positioning. Chipbreakers at left and top spindles with pneumatic pressure. -- Feed: Feed works: Invertor drive 5 HP feed system with feed speeds of 20 - 82 FPM. -- Includes: Central lubrication, automatic table lubrication, 2 M (6'6") infeed table, chromed tables and fences, swing-away intermediate short piece gearbox opposite left spindle. Full width powered adjustable infeed & outfeed rollers in machine bed, lateral side pressure roller at infeed gate, feed jog/inch forward at the top spindle and operator tools & manuals. (1) Set of full-width tooling (spiral carbide tool on first bottom) and grease gun for outboard bearing lock. -- Many additional options available to tailor the machine to your specific requirements. -- Installation and (12) month warranty included on all NEW Machines!

LEADERMAC 630P "PLATINUM" Feed Through Moulder; 6-Head (B-R-L-T-T-B), working cap. 12" x 6".Specifications: -- Head sequence: Bottom 15 HP, right 10 HP, left 15 HP, top 20 HP, top 20 HP and bottom 20 HP motor. -- Spindle dia. 1-13/16" (40 mm and 2-1/8" also available) with cutterhead speed of 7,200 RPM. -- Outboard bearings on spindles 1,4,5 and 6. Pneumatic locks on outboard bearing supports on top heads. -- All spindles equipped with mechanical digital readouts, "Dual mechanical" readouts on left and top spindles. Mechanical readouts for pressure elements and chipbreakers; all chipbreakers and pressure elements with pneumatics. -- Feed works: Inverter driven 5 HP feed system with feed speeds of 20 - 100 FPM. -- Infeed table 2M (6'6"), chromed tables and fences. Side pressure roller mounted at infeed. Features and complete with: -- Central lubrication; -- Short stock attachment. -- Automatic table lubrication pump. -- Side pressure roller mounted to infeed table. -- Sound enclosure and includes: (1) set of cutter heads.