• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
12 Results Found for Sander Viewing 1 - 12 of 12 results
RECENTLY ADDED
STANDARD LISTINGS
BUTFERING CLASSIC 2 KC/1100 Wide Belt Sander, (2) Heads; -- 43" Width capacity, Drum, Combination Head.Head Configuration:1st Head: -- Rubber covered Contact Roller 85 shore hardness 15 kW motor.2nd Head: -- Combination contact roller, 85 shore hardness, with sanding platen. 15 kW motor.Specifications: -- Abrasive belt size 1,120 mm x 1,900 mm. -- Contact rollers and sanding platen are all height adjustable. -- "Turret Stop" grit size compensation on contact rollers. -- Both main motors (15 kW) have automatic Star Delta starting. -- Safe, maintenance-free electrical main braking. -- Pneumatic tensioning of the abrasive belts. -- Electronic belt oscillation.Additional Features: -- Air loaded Floating Table for workpiece thickness compensation, includes pressure bars instead of pressure rollers. -- Motorized table height adjustment. -- LED Digital readout of the workpiece thickness.Feed System: -- Conveyor belt through-feed with automatic tracking. -- Driven by motor and worm gearbox to provide 2 selectable feed speeds of 4 and 8 m/min. -- Complete with pneumatic and inspection devices including mains air pressure regulator with filter. -- Rotating panel cleaning brush, with extra dust hood 140 mm diameter.Equipped with & features: -- Veneer sanding feature with workpiece controlled air cushion pad. -- Synchronized for both feed speeds and including extra sanding pad. -- Hand held workpiece thickness caliper 0-50 mm.
Equipment Location:PACIFIC NORTHWEST
Joe Retzlaff
800-374-5009 ext:348
BUTFERING CLASSIC -313-QCE Wide Belt Sander (4) Heads; 53" Width capacity, Crossbelt, Combination Head, Segmented Platen, Panel Cleaning Brush.Head Configuration: 1st Head: -- Cross belt, 2-speed abrasive belt. -- 9 or 18 MPS (30 + 60 FPS), 24 HP motor. -- Pneumatic belt cleaning, Inner "Chevron Belt" with independent tensioning. -- CPS50 Segment control, 26 - 50 mm segments with variable edge pressure.2nd Head: -- Combination head, contact roller with segmented pad. -- Rubber covered contact roller 85 shore (grooved) 5-1/2" dia., 2-speed abrasive belt drive, 9 + 18 MPS (30 + 60 FPS) 24 HP motor. -- Pneumatic belt cleaning. -- CPS50 Segment Control, 26 - 50 mm segments with variable edge pressure.3rd Head: -- Segmented Pad. Electronic variable speed belt drive, 2.0 -18.0 MPS (6.6 - 59.1 FPS), 20 HP motor. -- Rubberized pressure rolls (throughout machine), Pneumatic belt cleaning. -- Additional sanding insert for sealer sanding. -- Bi-Directional belt drive included. -- CPS50 Segment Control, 26 - 50 mm segments with variable edge pressure.4th Head: -- Panel cleaning brush at Outfeed, 1.2 HP motor.Feed System: -- Constant Pass Line. -- Electronic variable speed infeed 8 - 42 FPM. -- Roller infeed extension. -- Vacuum infeed, internally mounted 8.5 HP. -- Vacuum bed two-sections in through feed direction.Specifications & Equipped with: -- Crossbelt size 6" x 185". -- Head 2 - 3 belt size 52" x 103". -- Machine working width 53". -- Automatic pneumatic belt tracking. -- Automatic belt tensioning. -- Automatic infeed belt tracking. -- Automatic infeed belt tensioning. -- PLC CONTROLLER, with 2,000 program storage addresses, Alpha or Numeric, color graphics screen. -- Sanding pressure PLC controlled. -- Thickness gauge 0 to 1.97". -- Fail-Safe emergency power unit for belt oscillation.
Equipment Location:PACIFIC NORTHWEST
Joe Retzlaff
800-374-5009 ext:348
BUTFERING OPTIMAT SBC 311 RCE Wide Belt Sander (3) Heads --43" Width cap. Drum, Combination Head, Platen --Head Configuration: --1st Head: Steel contact roll, 8" dia., 25 HP motor. --2nd Head: Combination Head with Rubber covered contact roll, Segmented Platen/Pad, 20 HP Motor --3rd Head: Segmented Platen/Pad, 17 HP Motor --Specifications: -- 43" x 75" Abrasive belts, electronic abrasive belt tracking, --Conveyor belt feed with variable feed speed from 8 - 43 FPM --Automatic conveyor belt tracking, infeed & outfeed spring loaded rubber covered holddown rolls. -- 1/8" - 5-1/2" Motorized thickness adjustment with LED readout. --Equipped with & Features --Vacuum Bed -- Infeed panel "over-thickness" sensor --Infeed & outfeed emergency stops, safety interlocks on all doors. --Motor load meters, and main motor electronic brakes.
Equipment Location:MID ATLANTIC
Joe Retzlaff
800-374-5009 ext:348
BUTFERING OPTIMAT SBC-211RV Wide Belt Sander (2) Heads:43" width cap. Drum DrumHead Configuration:1st Head: Rubber covered contact roll (65-Shore), 20 HP motor2nd Head: Rubber covered contact roll (35 Shore), 20 HP motorSpecifications: --1st and 2nd Head inverter for variable abrasive belt speeds 6 - 60 FPS. -- 44" x 103" abrasive belts --Both contact rolls with electronic height positioning, electronic abrasive belt tracking --PLC control with LED terminal. -- Conveyor belt feed, 8 - 42 FPM variable feed speed, 2 HP feed drive with inverter control, --Constant pass line of conveyor bed assembly 35".Equipped with & Features -- Vacuum bed assembly with internally mounted fan and motor --Infeed and outfeed holdown shoes on both heads --Automatic conveyor belt tracking, -- 0" - 5-3/4" motorized thickness adjustment with LED readout. -- Complete with: Infeed panel "over-thickness" sensor --Air blast abrasive belt cleaners activated by the panel --Electronic brakes on both sanding head motors. -- Infeed emergency stop, roller infeed conveyor extension, and motor load meters.Some spec's need to verified
Equipment Location:SOUTHWEST
Joe Retzlaff
800-374-5009 ext:348
BUTFERING OPTIMAT SCO 413 RRRR Top Head Wide Belt Sander (...part of line with SX-012681 Profiline 3-Head Bottom Sander)Top 4-Head, 53" Width Capacity Wide Belt Sander with (4) Drums (Rollers).Head Configuration: -- 1st Head: Steel Contact Roll, 240 mm (9-1/2") dia., 22 kW (30 HP) motor. -- 2nd Head: Rubber covered Contact Roll, 85 Shore, 240 mm (9-1/2") dia., 22 kW (30 HP) motor. -- 3rd Head: Rubber covered Contact Roll, 65 Shore, 320 mm (12-1/2") dia., 22 kW (30 HP) motor; Rotation with or against feed direction. -- 4th Head: Rubber covered Contact Roll, 35 Shore, 320 mm (12-1/2") dia., 18.5 kW (25 HP) motor. -- All Heads with servo positioning of Contact Roller via precision motor to 1/100 mm, with possibility to store different values in the Terminal.Features & Specifications: -- Out-feed Rotary Panel cleaning brush with abrasive grit, 5.5 kW (7.5 HP) motor. 950 mm (37") Section of free standing power driven infeed roller track. 54" x 103" Abrasive belts, electronic abrasive belt tracking, and all heads with servo driven grit compensation and motorized positioning. Abrasive belt Air-jet blowers on all heads. Automatic head locking for fast abrasive belt change. -- Vacuum conveyor belt feed with variable feed speed 5 - 25 m/Min (16-1/2 - 82 FPM), automatic conveyor belt tracking, infeed & outfeed spring loaded rubberized hold-down rollers. -- Constant passline of 900 mm (35-1/2") by adjustment upper machine frame via (4) large dia. threaded spindles. -- Color touch screen control with 1,000 programs, 1/8" - 5-1/2" motorized thickness adjustment, "quick-set" automatic thickness adjustment with LED readout; infeed panel "over-thickness" sensor.Complete with: -- Infeed & outfeed emergency stops, safety interlocks on all doors, roller infeed conveyor extension, motor load meters and electronic brakes for all sanding head motors. -- Operator and Maintenance manuals (in Spanish); spare parts drawings, spare parts list, and wiring diagram.NOTE: -- BUTFERING "PROFILINE SUR" Bottom Sander and "OPTIMAT SCO" Top Sander [SX-012681] are being offered as a Complete System/Line with Infeed and Transfer Connect; one common Control for both machines to operate as line. - Copy of original quote with detailed specifications is available upon request.Asking Price with this "SX-012684" listing is for the Top Head Sander only - Open to reasonable offers.
Equipment Location:SOUTHEAST
Joe Retzlaff
800-374-5009 ext:348
BUTFERING Profiline SUR 313 RRR Bottom Wide Belt Sander with Powered Infeed & Connect to Top Sander (...see SX-012684 OPTIMAT SCO 413 RRRR Top Head Wide) Bottom 3-Head, 53" Width Capacity Wide Belt SanderHead Configuration: -- 1st Head: Steel Contact Roll, 240 mm (9-1/2") dia., 22 kW (30 HP) motor; -- 2nd Head: Rubber covered Contact Roll, 65 Shore, 320 mm (12-1/2") dia., 22 kW (30 HP) motor; Rotation with or against feed direction; -- 3rd Head: Rubber covered Contact Roll, 55 Shore, 320 mm (12-1/2") dia., 18.5 kW (25 HP) motor; Rotation with or against feed direction.Features & Specifications: -- Out-feed Rotary Panel cleaning brush with abrasive grit, 5.5 kW (7.5 HP) motor; -- 950 mm (37") Section of free standing power driven infeed roller track; -- 54" x 103" Abrasive belts, electronic abrasive belt tracking, and all heads with servo driven grit compensation and motorized positioning; Abrasive belt Air-jet blowers on all heads. -- Vacuum conveyor belt feed with variable feed speed 5 - 25 m/Min (16-1/2 - 82 FPM), automatic conveyor belt tracking, infeed & outfeed spring loaded rubberized hold-down rollers, outfeed extension for linking to transfer conveyor, connecting Bottom head to Top head Sander. -- Constant passline of 900 mm (35-1/2") by adjustment upper machine frame via (4) large dia. threaded spindles. -- Tie-in conveyor to connect to Top-Head Sander, 1,500 mm (59"), 5 - 25 m/Min (16-1/2" - 82 FPM), synchronized with machine bed conveyor speed. -- Color touch screen control with 1,000 programs, 1/8" - 5-1/2" motorized thickness adjustment, "quick-set" automatic thickness adjustment with LED readout; infeed panel "over-thickness" sensor.Complete with: -- Infeed & outfeed emergency stops; safety interlocks on all doors; roller infeed conveyor extension; motor load meters and electronic brakes for all sanding head motors. -- Operator and Maintenance manuals (in Spanish); spare parts drawings, spare parts list, and wiring diagram.NOTE: -- BUTFERING "PROFILINE SUR" Bottom Sander and "OPTIMAT SCO" Top Sander are being offered as a Complete System/Line with Infeed and Transfer Connect; one common Control for both machines to operate as line. Copy of original quote with detailed specifications is available upon request.Asking Price with this "SX-012681" listing is for the Bottom Head Sander only - Open to reasonable offers.
Equipment Location:SOUTHEAST
Joe Retzlaff
800-374-5009 ext:348
BUTFERING SBO109 Wide Belt Sander (1) Single Head -- 36" width cap. Combination Head --Head Configuration --1st Head:, Combination head with height adjustable contact roller & (2) sanding inserts. --Specifications --Steel contact roll with grit compensation & finishing platen. --18 KW (25 HP) motor. -- 37" x 75" Abrasive belt with belt tracking, 0.75 HP feed drive --Conveyor belt feed speed of 14 or 28 FPM. --Infeed & outfeed rollers, electronic belt oscillation system. --Equipped with & Features -- Motorized part thickness adjustment from 0" - 6" w/LED display. -- Complete with: Electric brake, emergency stop button, motor load meter, magnetic controls, and (1) 6-1/4" dia. dust outlet. -- Machine removed from service at one man shop very good condition.
Equipment Location:PACIFIC NORTHWEST
Ed Webb
800-374-5009 ext:377
BUTFERING SBO 109 SINGLE HEAD WIDE BELT SANDER1-Head, 36" width cap., combination head with height adjustable contact roller & (2) sanding inserts, steel contact roll with grit compensation & finishing platen; 18 HP motor. -- 37" x 75" Abrasive belt with belt tracking, 0.75 HP feed drive, conveyor belt speed of 14 or 28 FPM; infeed & outfeed rollers, electronic belt oscillation system. -- Motorized part thickness adjustment from 0" - 6" w/LED display. -- Complete with: Electric brake, emergency stop button, motor load meter, magnetic controls, and (1) 6-1/4" dia. dust outlet. -- Owner is upgrading to a larger 2-head sander.
Equipment Location:MIDWEST
Ed Webb
800-374-5009 ext:377
BUTFERING OPTIMAT SCO-213/RC Wide Belt Sander with (2) Heads; 53" Width Cap. Drum, Combination Head. Head Configuration: -- 1st Head: 18 KW motor, 9" dia. Spiral Steel roller, belt cutting (sanding) speed of 80 MPS. -- 2nd Head: 15 KW motor, "Combination" head with 60-shore rubber covered contact roller, automatic height positioning of the contact roller, electronic segmented pad with 35 mm wide segments; 12 MPS cutting speed.Application for the R & C Heads: -- "R" Head, calibration of wood and wood composite materials, calibration of wood and wood composite materials. -- "C" Head, Veneer sanding, Fine sanding of wood and wood materials, Intermediate lacquer (sealer) sanding. Technical Specifications: -- Working width of 1,346 mm (53"); abrasive belt width of 1,346 mm (53") x length of 1,900 mm (75"). -- Part thickness 3 - 150 mm (1.2" - 5.9"). -- Dust collection requirements: 3,200 CFM. Equipped with & Features: --Automatic thickness setting system with indexing control. -- Rubberized holddown rollers before & after each sanding head. -- Motorized workpiece thickness setting via joy stick control and features over-thickness protection system. -- Touch-screen controller, (125) program storage cap.; millimeter & inch conversion. -- Conveyor table mounted on (4) Heavy Duty jack screws, automatic conveyor belt tracking, electronic abrasive belt oscillation system, air jet cleaning, and electronic sanding head motor braking system. -- Safety interlocks on all access doors, infeed roller extension; emergency stops at infeed & outfeed locations.
Equipment Location:SOUTHWEST
Joe Retzlaff
800-374-5009 ext:348
BUTFERING SKO-113-C SINGLE HEAD WIDE BELT SANDER 1-Head 43" Width cap. .125" to 5.875 Conveyor bed opening thickness capacity. Combination sanding head with steel contact roll & electronically controlled segmented platen. Variable speed sanding belt for optimum solid wood sanding, veneered panels, and lacquer sandingConveyor bed features a Fixed constant passline height of 35"Specifications: Contact roll height position with programable control.Platen consists of 35 mm wide segments designed to conform to part size to minimize sand throughs.43" Wide vacuum bed with 3 Kw vaccum pump motor assembly. 43" X 75" Abrasive belt with air tensioning and electronic abrasive belt tracking,Variable abrasive belt speed from 500 FPM to 3,600 FPMIncludes out feed rotary panel cleaning brush.Touch screen program control with storrage up to (125) programs, Feed System: Conveyor belt feed 2 HP motor, Variable feed drive from 8 - 43 FPM.Conveyor bed fixed height 35" (Sanding head is raised and lowered to compensate for material thickness requirements)Vacuum conveyor bed assembly with suction fan and motor assembly, for thin material, and small parts.Infeed & outfeed rubber covered holddown rolls.Programable part thickness opening 1/8" - 5-7/8", automatic conveyor belt tracking. Complete with: Infeed roller extension, electric brake on abrasive belt,Emergency stop button,Motor load meter, and magnetic controls. Includes 30KVA transformer.Sander has less than 100 working hours - Some spec's need to be confirmed.
Equipment Location:MID ATLANTIC
Ed Webb
800-374-5009 ext:377
BUTFERING SKO 213RC2 Wide Belt Sander (2) Heads53" width cap. Drum, PlatenHead Configuration1st. Head: 30 HP Drum with steel contact roll (80-Shore).2nd Head: Electronically controlled air segmented finishing platen, 25 HP. The contact roll height poistion with programable control. The platen consists of 35 mm segments designe to conform to paty size to minimize sand through.Specifications: --Brush cleaning unit --54" x 75" abrasive belts, electronic abrasive belt tracking --Both contact rolls with grit compensation. --Variable conveyor belt feed, feed speed of 8 - 43 FPM, automatic conveyor belt tracking --3 HP feed drive; infeed & outfeed spring loaded --Rubberized holddown rolls. --1/8" - 5-1/2" Motorized thickness adjustment with LED readout --Automatic part thickness setup with indexing control.Equipped with & Features: -- Infeed panel "over-thickness" sensor --Electronic motor brakes on both sanding heads --Infeed & outfeed emergency stops, --Safety interlocks on all doors. -- Roller infeed conveyor extension and motor load meters.
Equipment Location:WESTERN CDN
Joe Retzlaff
800-374-5009 ext:348
BUTFERING SUPER 213RL Wide Belt Sander (2) Heads53" Width cap Drum, Combination Head Head Configuration:1st Head: Steel contact roll, 8" dia., 30 HP motor.2nd Head: Combination head with a rubber covered contact roll (65-Shore) and electronically controlled air polishing platenSpecifications: --Air inflateable platen with jump control to raise-and-lower the platen to the leading-and-trailing edges of a panel. --54" x 75" Abrasive belts --Electronic abrasive belt tracking, both contact rolls with grit compensation. --Variable conveyor feed speed of 8 - 43 FPM, --Automatic conveyor belt tracking. -- 3 HP feed drive --Infeed & outfeed spring loaded, rubberized holddown rolls -- 1/8" - 5-1/2" motorized thickness adjustment with LED readout --Joy stick controlled --Automatic part thickness setup with indexing controlEquipped with & Features: -- Infeed panel "over-thickness" sensor --Electronic motor brakes on both sanding heads --Infeed & outfeed emergency stops, --Safety interlocks on all doors --Roller infeed conveyor extension --Motor load meters.Note: Some spec's need to be varified
Equipment Location:SOUTHWEST
Joe Retzlaff
800-374-5009 ext:348