• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
9 Results Found for Sander Viewing 1 - 9 of 9 results
RECENTLY ADDED
STANDARD LISTINGS
Ramco 24" Belt Sander w/15 HP 3 Phase Motor, 5 HP Motor Pulls Belt $1,000 660-287-4613/660-287-6130
Equipment Location:Hughesville, MO
D & S Wood Products Inc
660-287-6160
RAMCO 43T/1 SINGLE HEAD WIDE BELT SANDER1-Head, 42" width cap., combination head with 7" dia. rubber covered contact roll, and 2-1/2" wide platen.Equipped with: -- 30 HP main drive motor. 1 HP Motor variable feed speed 20 - 70 FPM conveyor feed speed. -- 0 t0 6" thickness capacity, with mechanical digital thickness indicator. -- 43" x 75" abrasive belt with electronic tracking & pneumatic belt tensioning, -- Single infeed & outfeed pinch rollers.Complete with: -- Safety bump bar -- 12" Conveyor extension -- Percentage of load indicator
Equipment Location:SOUTH
Ed Webb
800-374-5009 ext:377
RAMCO DW-25A SINGLE HEAD WIDE BELT SANDERSingle Head 36" Wide Belt Sander with combination head. -- 4" Dia. rubberized contact drum and 2-1/2" finishing platen. -- 10 HP Sanding belt motor and 1 HP feed motor. -- 37" x 60" Belt capacity. -- Motorized thickness setting of 0" - 5-1/2" capacity. -- (2) Jackscrews to move the table-up-and down. -- Variable conveyor speeds of 15 - 45 FPM. -- Infeed & outfeed spring loaded holddown rollers. -- Load meter and safety shutoff. -- Options: 12" Infeed extension table and 25" x 75" belt capacity.
Equipment Location:MIDWEST
Ed Webb
800-374-5009 ext:377
RAMCO DW-37W SINGLE HEAD WIDE BELT SANDERSingle Head 36" Wide Belt Sander with combination head. -- 4" Dia. rubberized contact drum and finish platen. -- 15 HP Sanding belt motor and 2 HP feed motor. -- 37" x 60" Belt capacity. -- Motorized thickness setting of 0" - 6" capacity. -- (4) Jackscrews to move the table-up-and down. -- Variable conveyor speeds of 15 - 45 FPM. -- Infeed & outfeed spring loaded holddown rolls. -- Load meter and safety shutoff. -- Options: Infeed extension table and 37" x 75" belt capacity.
Equipment Location:MIDWEST
Ed Webb
800-374-5009 ext:377
Single head, 36" width cap. - 7" Dia. rubber covered contact snadeing roll followed by an adjustable 2-1/2" Wide finishing platen, 20 HP motor. -- 37" x 75" Abrasive belts, electronic abrasive belt tracking. -- Equipped with: Infeed & outfeed spring loaded holddown rolls, 0" - 6" max. motorized part thickness opening and Programmable thickness adjustment; 15 - 45 FPM variable feed speed driven by a 2 HP. motor. -- Complete with: Air operated disc brakes, motor load meters.
Equipment Location:MIDWEST
Ed Webb
800-374-5009 ext:377
Heavy Duty 25" single head Drum Sander. -- 25" Wide thick conveyor belt as with Wide Belt Sanders. -- Enclosed fabricated steel base with easy access doors. -- 3 HP Single-phase or 5 HP 3-phase motor to drive the sanding drum. -- 6" Steel drum. -- Independently adjustable head. -- Variable conveyor speed of 7 - 22 FPM and 0.25 HP feed drive. -- Hand wheel to manually set 0" - 4" thickness capacity. -- 4-Jackscrew system for thickness adjustment of bed. -- (2) Each rubber covered infeed & outfeed rollers. -- (2) Dust outlets and push button magnetic controls.
Equipment Location:MIDWEST
Ed Webb
800-374-5009 ext:377
Heavy Duty 25" 2-head Drum Sander. -- 25" Wide thick conveyor belt as with Wide Belt Sanders. -- Enclosed fabricated steel base with easy access doors. -- 3 HP Single-phase or 5 HP 3-phase motor to drive both sanding drums. -- 1st head - 6" steel drum; 2nd head - rubber covered. -- Both heads independently adjustable. -- 7 - 22 FPM Fixed conveyor speed, 0.25 HP feed drive. -- Hand wheel to manually set 0" - 4" thickness capacity. -- 4-Jackscrew system to adjust bed thickness. -- (2) Each rubber covered infeed & outfeed rollers. -- (4) Dust outlets and push button magnetic controls.
Equipment Location:MIDWEST
Ed Webb
800-374-5009 ext:377
Heavy Duty 37" single head Drum Sander. -- 37" Wide thick conveyor belt as on Wide Belt Sanders. -- Enclosed fabricated steel base with easy access doors. -- 5 HP Single-phase or 5 HP 3-phase motor to drive the sanding drum. -- 6" Steel drum. -- Independently adjustable head. -- Variable conveyor speed of 7 to 22 FPM and 0.25 HP feed drive. -- Hand wheel to manually adjust 0" - 4" thickness capacity. -- 4-Jackscrew system to adjust thickness of bed. -- (2) Each rubber covered infeed & outfeed rollers. -- (2) Dust outlets and push button magnetic controls.
Equipment Location:MIDWEST
Ed Webb
800-374-5009 ext:377
Heavy Duty 37" 2-Head Drum Sander. -- 37" Wide thick conveyor belt as with Wide Belt Sanders. -- Enclosed fabricated steel base with easy access doors. -- 5 HP Single-phase or 5 HP 3-phase motor to drive both sanding drums. -- 1st Head - 6" steel drum; 2nd head - rubber covered. -- Independently adjustable heads. -- 7 - 22 FPM Fixed conveyor speed and 0.25 HP feed drive. -- Hand wheel to manuall adjust 0" - 4" thickness cap. -- 4-Jackscrew system to adjust bed thickness. -- (2) Each rubber covered infeed & outfeed rollers. -- (4) Dust outlets and push button magnetic controls.
Equipment Location:MIDWEST
Ed Webb
800-374-5009 ext:377