• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
5 Results Found for Sander Viewing 1 - 5 of 5 results
RECENTLY ADDED
STANDARD LISTINGS
VIET CHALLENGE 321B Wide Belt Sander (3) Heads: --43" Width cap. Drum, Drum, Platen --Head Configuration: --1st Head: Rubber covered contact roll 7-1/2" dia. (90-shore), 15 HP motor; --2nd Head: Rubber covered contact roll (65-shore) 15 HP motor --3rd Head: Segmented polishing platen with (25) individual segments, computer controlled to conform to any panel shape to minimize veneer sand throughs, 20 HP motor. --Specifications: -- Outfeed rotary panel cleaning brush, 6" dia. brush, 0.75 HP motor. -- 44" x 103" Abrasive belts with electronic belt tracking and air tensioning; -- Max. working height 6.30" --2 HP conveyor belt feed motor, dual feed speed of 15 & 30 FPM. --Equipped with & Features -- Computer with: 6" Color touch screen, cap. of (100) machining programs; sequence of motor start-up, --Display of square footage of panels processed with totals, alarm signals with relative indication for warning of board malfunctions, pneumatic pressure, and conveyor endcoder. -- All heads equipped with: Double infeed & outfeed pinch rollers; --Automatic/motorized thickness opening with LED readout. -- Complete with: Emergency stop for abrasive belt breakage, infeed & outfeed conveyor support rollers, and motor load meters.
Equipment Location:WEST COAST, AL
EX-FACTORY INC.
704-841-2001
VIET Challenge 333 Wide Belt Sander,3-Head wide belt sander with vacuum hold down.Specifications: 3-Head, 1,350 mm (53") max. working width. Solid wood and thick veneer sander. Fixed pass line height suitable for working in a line. -- Abrasive Belt lengths 2620 mm x 1380 mm (103" x 54"). -- Feed through speed inverter controlled.Head Configuration: -- 1st Head: Rubber covered contact roll 320 mm (12-1/2") diameter. Shore hardness 80; 25 HP motor, abrasive belt speed 24 m/Sec. (79 FPS). -- 2nd Head: Rubber covered contact roll 320 mm (12-1/2") diameter. Shore hardness 50; 20 HP motor. Abrasive belt speed 20 m/Sec. (66 FPS). -- 3rd Head: Combination head with solid graphite covered platen. -- At Outfeed: Panel Cleaner Unit: currently set up with Scotch Brite Brush.Feed system: -- 2 kW (3 HP) Motor variable speed belt drive from 3 - 16 m/Min (11 - 52 FPM). -- Material thickness range 4 - 160 mm (0.16 - 6.2"). Controller: MAGELIS controller visual display, inverter controls for the sanding heads.Equipped with: -- Load meters on all heads; dust extraction for each heads 1 @ 6.2" diameter and 2 @ 4.5"; disc brakes on all heads; emergency stop for belt breaks.Actual model is VIET Challenge 333-TM .NOTE: This machine has been in storage for over a year so it is recommended that a qualified technician installs the machine and performs a full service and upgrading as desired.NOTE: The rubber shore (hardness) of the first two heads needs to be confirmed prior to sale.
Equipment Location:SOUTHEAST
Joe Retzlaff
800-374-5009 ext:348
VIET S2-321-2200 Wide Belt Sander (3) Heads43" Width cap. Drum, Drum, Drum.Head Configuration:1st Head: Rubber covered contact roll 7-1/2" dia. (90-shore), 25 HP motor.2nd Head: Rubber covered contact roll 7-1/2" dia. (50-shore), 20 HP motor.3rd Head: Rubber covered contact roll, 7-1/2" Dia, (30-shore), 20 HP motorSpecifications: --Width:1100mm, 43” --Auto On/Off Control of Each Working Unit From Main Control Panel --Grooved Pressure Rollers Before/After each Unit --Inverter Feed (Variable 3-16 m/min 10ft/min ~52ft/min) --Working Thickness-3mm ~ 160mm (1/8~6.29”) --Pneumatic cylinder for Conveyor Feed Belt Tracking --Abrasive Belt Tracking maintained with separate photocells for “sending” and “receiving”. --Disk Brakes for Motors --Acoustic Sound Enclosure.Equipped with & Features: -- Emergency stop for abrasive belt breakage. --Infeed & outfeed rubber covered hold down rolls. --Motor load meters.Special Note: Some spec' need to be verified
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
VIET S219 R + KRT 2-Head Wide Belt Sander --2-Head with (1) Contact Roller and (1) Combination drum and Sanding platen. 970 mm (38") working width. -- 1st Head: Rubber covered contact roll, spirally grooved, 6" diameter Shore hardness 80. -- 2nd Head: Combination with 6" diam. grooved rubber drum and sanding platen -- Both heads driven by one main motor 15 kW (20 HP). -- Both heads equipped with 980 x 1,900 mm (39"" x 75") abrasive belts. -- Roller & pressure shoe hold downs. Pneumatic tension of sanding belts and feed conveyor. -- Feed system: -- Variable speed conveyor belt drive max. 9 m/min. (30 FPM). Part thickness 3 - 160 mm (1,2" - 6,3"). Motorized part thickness adjustment, with digital height read-out.Features & Includes: -- Load meter & disc brake on main motor. -- Emergency stops front & back. -- Roller table extensions front & back. -- Over-sized parts infeed protection. Air blowers for abrasive belt cleaning.
Equipment Location:EASTERN CDN, AL
EX-FACTORY INC.
704-841-2001
VIET S219 R/RKT Calibrating Wide Belt Sander.Solid Wood and Thick Veneer SanderSpecifications: 2-Head with (1) Contact Roller and (1) Combination head with Contact Roller & Fine Sanding Platen, 970 mm (38-3/16") working width and Part thickness 3 - 160 mm (1,2" - 6,3").Head configuration: -- 1st Head: Rubber covered contact roller, spirally grooved, diameter 190 mm (7-1/2"), Shore hardness 90. -- 2nd Head:Combination head with contact roller Shore hardness 40, and electric-pneumatic fine sanding platen, not segmented. -- Both heads driven by one main motor 15 kW (20 HP). -- Both heads equipped with 1,900 x 1,000 mm (74-13/16" x 39-3/8") abrasive belts, 160 mm (6-5/16") dust hoods, and pneumatic tensioning of sanding belts.Feed system: --2-Speed feed motor 4,5 + 9 m/Min (8 + 30 FPM), 2 kW (2,75 HP) feed drive. -- Roller & pressure shoe hold downs. Motorized part thickness adjustment, with digital height read-out. -- Pneumatic tensioning of feed conveyor.Features & Includes: -- Load meter on main motor; disc brake on main motor; -- Emergency stops front & back. -- Roller table extensions front & back. -- Oversized parts infeed protection. Actual model is VIETS219 R/RKT Calibrating Wide Belt Sander.
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348