• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
10 Results Found for Sander Viewing 1 - 10 of 10 results
RECENTLY ADDED
STANDARD LISTINGS

SCM RRT 130 Sander

CDN$23,500
SCM Sandya RRT 130 3 Head Wide Belt Sander -- 3-Head, 51" cap. Drum, Drum, Segmented PlatenHeads configuration: -- 1st Head: 9" Dia. rubber covered contact roll, 35 HP motor; -- 2nd Head: 9" Dia. rubber covered contact roll, 35 HP motor; -- 3rd Head: Finishing platen with electronic segmented pads, 15 HP motor; -- Outfeed rotary panel cleaning brush.Features: -- 52" x 103" Abrasive belts -- Solid-state electronic tracking, -- Vacuum conveyor feed with 3 HP variable feed drive, feed speed from 15 - 75 FPM; -- Automatic conveyor belt tracking. -- Infeed & outfeed holddown shoes w/pinch rolls on all heads, motorized part thickness adjustment with LED readout, -- Automatic part thickness adjustment, 0" - 6-1/4" part thickness opening. Complete with: -- Oscillating abrasive belt cleaners on last (2) heads, select individual head operation from control panel on heads (#1 & #2), -- Control panel pendulum mounted at front of machine, -- Automatic Star-Delta start on sanding motors, and motor load meters.
Equipment Location:EASTERN CDN
Joe Retzlaff
800-374-5009 ext:348
SCM "SANDYA-CL CCS-110" Dual Head Wide Belt Sander; 2-Head, 42" width capacity. For Veneer or Solid wood sanding with (1) Contact roll and (1) finishing platen. -- First Head: Rubber covered contact roll 11-1/2" Dia., 36 HP motor. -- 2nd Head: Combination head with rubber covered contact roll and 3-1/2' wide finishing platen with jump control, 18 HP motor. -- Platen is controlled with sensors and timers to drop down on leading edges & retract up on trailing edges of a panel, this minimizes sand throughs on veneer panels. -- 43" x 85" and 43" x 91" long abrasive belts with air jet tracking, thin veneer sanding package with floating bed & rigid/spring loaded hold down shoes, all shoes with nylon tipps. -- 1.8 HP Variable feed speed, 15 to 60 FPM. -- 0" to 6" motorized part thickness adjustment with LED readout, automatic part thickness set up. -- Includes: Infeed & outfeed support rollers on conveyor belt, motor load meters and infeed safety stops.
Equipment Location:MTN/CENTRAL CDN
Joe Retzlaff
800-374-5009 ext:348
SCM SANDYA 10 - 2-Head Wide Belt Sander;1,100 mm (43") working width. -- Equipped with contact roller and combination head. Suitable for veneer & lacquer sanding, as well as solid wood.Head configuration: -- 1st Head: Steel contact roller 160 mm (6,3"), spirally grooved. -- 2nd Head: Combination head contact roller rubber, spirally grooved - finishing platen with electronic sectional pad with EPICS-system. This system ensures maximum sensitivity and precision for sanding panels with considerable variations in thickness. -- Both heads driven by 11 kW (15 HP) motor with inverter. -- Sanding Belt width 1,115 mm x length 2,150 mm (44" x 84.6"). -- Feed system: Variable feed speeds 4,5 - 9 m/min (15 - 30 FPM), natural rubber feed belt. Automatic thickness adjustment. Automatic feed belt tracking and tension device, motorized rise and fall of working table. Part thickness 4 mm (0.2") to 170 mm (6.7"). Roller tables front & back of the machine.Features: -- Electronic sanding belt tracking. -- Digital readout of part thickness and conveyor belt speed. -- Infeed safety bar for operator protection and over-sized parts. -- Front and rear emergency push button. -- Automatic star-delta start of the main motor. -- Overload protection & load meter for main motor. -- Automatic brakes for rapid shutdown of operating groups. -- Automatic emergency stop for:... sanding belt breaking... loss of sanding belt tension... lateral outplacement of sanding belt... absence of compressed air... overload on main motors.
Equipment Location:MID ATLANTIC
Joe Retzlaff
800-374-5009 ext:348
SCM SANDYA 10-S Wide Belt Sander (2) Heads43" Width cap. Drum, Combination Head. Suitable for veneer & lacquer sanding, as well as solid wood.Head Configuration1st Head: Steel contact roller 160 mm (6,3"), spirally grooved. 20 HP motor2nd Head: Combination head contact roller rubber, spirally grooved - finishing platen with electronic sectional pad with EPICS-system 18 HP motor. This system ensures maximum sensitivity and precision for sanding panels with considerable variations in thickness.Specifications -- Sanding Belt width 1,115 mm x length 2,150 mm (44" x 84.6"). --Variable feed speeds 4,5 - 9 m/min (15 - 30 FPM), natural rubber feed belt. -- Automatic thickness adjustment. Automatic feed belt tracking and tension device --Motorized rise and fall of working table. -- Part thickness 4 mm (0.2") to 170 mm (6.7"). --Roller tables front & back of the machine. Equipped with & Features -- Electronic sanding belt tracking. -- Digital readout of part thickness and conveyor belt speed. -- Infeed safety bar for operator protection and over-sized parts. -- Front and rear emergency push button. -- Automatic star-delta start of the main motor. -- Overload protection & load meter for main motor. -- Automatic brakes for rapid shutdown of operating groups.
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
SCM SANDYA 16 S RRT 135 VN - 3-Head Wide Belt Sander;1,350 mm (53") working width.Head configuration: -- 1st Head: Steel 10" helical grooved contact roller with single speed 25 kW (35 HP) motor. -- 2nd Head: 10" grooved rubber (55 Sh) contact roller, Two Speed 22 kW (30 HP) motor. -- 3rd Head: Electronic Sectional Platen with 37 sectors for Veneer Sanding. Variable speed with inverter on 15 kW (20 HP) motor. Sanding Belt width 1,350 mm x length 2,620 mm (53" x 103").Feed system: -- Motor 3 kW (4 HP), variable feed speeds 3 - 18 m/min (10 - 60 FPM), natural rubber feed belt 60 Shore, automatic feed belt tracking and tensioning device, motorized rise and fall of working table. Part thickness 3 mm (0.1") to 160 mm (6.3").Features: -- Logic TS Controller with 10" LCD color display. -- B46 Reading Bar for Sectional Pads with (37) Sectors. -- Vacuum Table with 10 HP vacuum Motor. -- Infeed and outfeed table extensions (5 rollers each). -- Timed oscillation abrasive belt blowers on each working unit. -- Electronic sanding belt tracking. -- Digital readout of part thickness. -- Infeed safety bar for operator protection and over-sized parts. -- Front and rear emergency push button. -- Main switch with ability to be locked out by padlock. -- Automatic star-delta starters for the main motors. -- Overload protection on main motor. -- Automatic brake for rapid shutdown of operating groups. -- Automatic emergency stop for:... sanding belt breaking... loss of tensioning of sanding belt... lateral outplacement of sanding belt... absence of compressed air... overload on main motors.Machine weighs 8,300 lbs. (3,765 kg).
Equipment Location:WESTERN CDN
Joe Retzlaff
800-374-5009 ext:348
SCMI SANDYA 20 RCS 135 Wide Belt Sander; -- (2) Head 53" Width capacity , Drum, Combination HeadHead Configuration:1st Head: -- First sanding group grooved steel calibrating roller with 250mm (10") diameter with 42 HP @ 60 Hz main motor sanding at 18 meters per second.2nd Head: -- Second sanding group combination head with 175 mm (7") 50 shore grooved rubber finishing roller and finishing platen; with 30 HP @ 60 Hz main motor.Specifications: -- Grooved rubber coated pressure roller in first position for increased panel grip with multiple pieces. -- Maximum Work Piece Thickness 6.25". -- Min. Work Piece Length 17". -- Abrasive Belt Size 53" x 103". -- Compressed Air Requirements 5 CFM @ 80 PSI. -- Dust Outlets: 2 outlets @ 7.7 inches. -- Exhaust Requirements 3,600 CFM.Feed System: -- 3 HP variable speed feed unit. Installed New in 2015. -- Feed speed is from 15 FPM to 70 FPM. -- Automatic conveyor belt tracking. -- Infeed and outfeed table extensions with (2) support rollers each.Equipped with & Features: -- Automatic Table Positioning Device. -- Electronic digital thickness readout of work table position. -- Front and rear emergency stop buttons.
Equipment Location:SOUTHWEST
Joe Retzlaff
800-374-5009 ext:348
SCMI SANDYA 5 RCS 110 Wide Belt Sander (2) Heads43" Width cap. Drum, Combination HeadHead Configuration, --1st Head: 5.5" Grooved contact drum, 5.5" 45 shore drum 25 HP motor --2nd Head: Combination head, rubber covered contact roll, 5-1/2″ dia., and 2″ wide finishing platen for veneer, 18 HP motor. Specifications --Infeed/Outfeed tables, electronic digital thickness readout for table height and motorized table height adjustment. --Automatic thickness setup device, with boot control. --Two speed conveyor (15/30 FPM). --Automatic feed mat tracking; 50 Shore no slip feed mat. --43" x 75" Abrasive belt; Electronic belt tracking.Equipped with & Features --Automatic advancement carpet --Grooved rubber precision rollers --Aspiration dust fans --Emergency device to save hands while pieces in feeding
Equipment Location:WESTERN CDN
Joe Retzlaff
800-374-5009 ext:348
SCM SANDYA 5/S RRCS 110 Wide Belt Sander (3) Heads43" Width cap. Drum, Drum, Combination HeadHead Configuration1st Head: Steel contact calibrating drum 5.5" dia, with 30 HP motor.2nd Head: Rubber contact drum 5.5" dia. 65 shore, with 24 HP motor.3rd. Head: Combination head, rubber covered contact roll, 6-1/4" dia. (65 Shore), and 2.36" wide finishing platen, 18 HP motorSpecifications --43" x 75" or 85" Abrasive belts with electronic tracking & pneumatic belt tensioning --Pneumatic exclusion of all contact rolls. --Conveyor belt feed with variable feed speed, 10 - 60 FPM, 3 HP motor --Automatic part thickness adjustment, motorized thickness opening with LED readout. -- 0" - 6-1/4" via (4) precision conveyor bed jacks.Equipped with & Features --Infeed & outfeed spring loaded rubber covered holddown rolls on all heads --Motor load meters --Infeed and outfeed conveyor extensions --Electronic digital thickness readout for table height --Auto thickness set-up device --50 shore seamless feed mate with negative profile -- WYE-DELTA soft start.
Equipment Location:WESTERN CDN
Joe Retzlaff
800-374-5009 ext:348
SCMI UNO-RCS-37 Wide Belt Sander (2) Heads --Width Capacity: 37": Drum, Combinations Head --Head Configuration: -- 1st Head 5-1/2" Grooved Steel Helical Drum, -- 2nd Head: Combination Style with 5-1/2 " Grooved Rubber Covered Drum 65 Duro and 2-1/4" Platen. --Specifications: Single 24 HP Motor Powers both Sanding Heads. -- Sanding Belt Size: 37" x 60". -- Feed Motor 1 HP 3PH motor Two-Speed Feed: 15 or 30 FPM -- Sanding belt speed 3150 SFPM. Two-Speed Feed: 15 or 30 FPM --Compressed air requirements 7 CFM @ 85 PSI, --Additional Features: --ProScale for Thickness Adjustment, with manual bed Raise/Fall (Four Jack-Screws), Electro-Pneumatic Tracking, Push-Button controls, Amp Meter for main motor, Infeed and outfeed tables, each with two (2) Idle Rollers
Equipment Location:SOUTHEAST
Joe Retzlaff
800-374-5009 ext:348
SCMI WIN CS63 24" Wide Belt Sander; 1-Head, 24" width cap., combination head with 4" dia. rubberized contact roll and 2" wide polishing platen,Equipped with: -- 18 HP main motor; 25" x 60" abrasive belt with pneumatic tracking and tensioning. -- 1/8" to 6-1/4" Motorized part thickness opening w/mechanical digital readouts. -- 1 HP dual speed conveyor belt feed drive 15 and 30 FPM, double infeed & outfeed rubber covered spring loaded holddown rolls. Includes: Disc brake on main motor, safety stop bars, motor load meter and 6-1/4" dia. dust outlet.
Equipment Location:MIDWEST
Ed Webb
800-374-5009 ext:377