• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
31 Results Found for Sander Viewing 1 - 20 of 31 results
RECENTLY ADDED
STANDARD LISTINGS
TIMESABERS 137 HP Abrasive Planer Single Head -- 1-Head, 36" width cap Equipped with: -- Combi head drum and platen, 20 HP motor w/Caliper disk brakes. -- 36" x 103" Abrasive belt, air-jet belt tracking with pneumatic tensioning, -- Feed works 10 to 40 FPM, neoprene conveyor belt, -- Motorized thickness opening 0" to 6". -- Infeed and outfeed spring loaded holddown shoes, 32" infeed load area.
Equipment Location:MID ATLANTIC
Ed Webb
800-374-5009 ext:377
TIMESAVERS 137-1 HP75 Wide Belt SanderSingle Head, 37" Width capacity. - Combination head -- Head Configuration 4" dia. contact roll & 2" wide dual action finishing platen, 20 HP V-belt drive motor.Specifications: -- 36" X 75" Belt size -- "Posi-Track" electronic belt tracking and air tensioning of abrasive belt. -- Ruff-Tex conveyor belt, --Feed System -- Variable 1 HP motor, feed speed 15 - 45 FPM; -- "Auto-Set" powered, automatic part thickness bed adjustment 0'-8" --, (4) precision anti-backlash 2-ton jacks for thickness control. -- Equipped With & Features --Double infeed & outfeed spring loaded pinch rollers, -- 12" infeed conveyor extension, -- disc brakes for quick positive stopping of contact roll, -- load meter; --centralized control panel with all push button and magnetic starters.
Equipment Location:PACIFIC NORTHWEST, AL
EX-FACTORY INC.
704-841-2001
Equipment Location:Woonsocket, SD
605-350-4272
TIMESAVERS 137-2HD Double Head, 36" wide belt sander. --2-Head, 36" width cap. - 1st Head: 6" Dia. rubber covered contact roll, 25 HP motor; 2nd Head: 2-1/2" Wide finishing platen, 15 HP motor.Belt Size/Features: -- 37" x 60" Abrasive belts, "Posi-Trak" electronic tracking & pneumatic tensioning, 15 - 45 FPM variable feed speed. -- Equipped with: Double infeed & outfeed spring loaded holddown rolls, 0" - 8" max. manual part thickness opening with mechanical digital readout, air operated disc brakes, motor load meters, 21" infeed conveyor extension, and infeed emergency stop. --Includes: (1) extra rubber covered roll, (1) pipe, (1) Elec. disconnect.
Equipment Location:EASTERN CDN, AL
EX-FACTORY INC.
704-841-2001
TIMESAVERS 137-2HD Double Head, 36" wide belt sander. --2-Head, 36" width cap. - 1st Head: 6" Dia. rubber covered contact roll, 25 HP motor; -- 2nd Head: 2-1/2" Wide finishing platen, 15 HP motor.Belt Size/Features: -- 37" x 60" (to be confirmed)Abrasive belts, "Posi-Trak" electronic tracking & pneumatic tensioning, 15 - 45 FPM variable feed speed. ÷Equipped with: -- Double infeed & outfeed spring loaded holddown rolls, 0" - 8" max. manual part thickness opening with mechanical digital readout, air operated disc brakes, motor load meters, 21" infeed conveyor extension, and infeed emergency stop.
Equipment Location:EASTERN CDN
Joe Retzlaff
800-374-5009 ext:348
TIMESAVER 137-2HD60 Wide Belt Sander (2) Heads; -- 36" width cap. Drum, Platen.Head Configuration: -- 1st Head: 6" dia. serrated rubber contact drum, 20 HP motor. -- 2nd Head: Adjustable graphite-coated polishing platen with air bag veneer option, 15 HP motor.Specifications: -- 37" x 60" Sanding belt size. -- Power bed raise and lower with digital readout. -- 1/4" - 7" Thickness range. -- Electronic variable speed feed 15 - 45 FPM, Feed motor 1 HP.Equipped with & Features: -- Auto-stop bar. -- Two load meters. -- Magnetic controls. -- Two 6" dust ports on top. -- (4) Lifting jacks on conveyor bed. -- Currently wired for 460 V, 3 Ph.; (could be changed to 230 V for a nominal fee).
Equipment Location:MID ATLANTIC, AL
EX-FACTORY INC.
704-841-2001
TIMESAVER 137-2HD60 Wide Belt Sander (2) Heads36" Width cap. Drum PlatenHead Configuration:1st Head: 6" dia. serrated rubber contact drum, 20 HP motor.2nd Head: Adjustable graphite-coated polishing platen with air bag veneer option, 15 HP motor.Specifications: -- 37" x 60" Sanding belt size. -- Manual rise and fall with Siko Digital readout. -- 1/4" - 7" Thickness range. -- Electronic variable speed feed 15 - 45 FPM, Feed motor 1 HP.Equipped with & Features: -- Auto-stop bar. -- Two load meters. -- Magnetic controls. -- Two 6" dust ports on top. -- (4) Lifting jacks on conveyor bed.
Equipment Location:SOUTHWEST
Joe Retzlaff
800-374-5009 ext:348
TIMESAVER 137-2HP75 Wide Belt sander (2) Heads36" Width cap. Drum, PlatenHead Configuration1st Head: Rubber covered contact roll recently replaced, 25 HP motor2nd Head:Finishing platen, 15 HP motor for veneer sanding Specifications --37" x 60" Abrasive belts, "Posi-Trak" electronic tracking & pneumatic tensioning, --Roller hold-downs --Variable feed speed 15-45 FPM, 1.5 HP feed motor --Automatic conveyor belt tracking and automatic thickness set system --24" infeed load space --Air operated disc brakes, motor load meters, and Perimeter E-stop bar
Equipment Location:SOUTHWEST
Joe Retzlaff
800-374-5009 ext:348

Timesavers 143 Sander

Call for Price
Sander. This machine is a Timesaver 143 - HP75 sander. Item #00516
Equipment Location:Sturgeon Lake, MN
L & L Sales
218-372-4232
TIMESAVERS 143-3 HP75 3-Head Belt Sander3-Head, 43" width cap. with (2) contact rolls and (1) platen. - 1st Head: 6" Dia. rubber covered contact roll, 25 HP motor.Specifications & Features: -- 43" width cap. with (2) contact rolls and (1) platen. -- 1st Head: 6" Dia. rubber covered contact roll, 25 HP motor. -- 2nd Head: 6" Dia. rubber covered contact roll, 20 HP motor; -- 3rd Head: 2-1/2" Wide finishing platen, 15 HP motor. Equipped with: -- 43" x 75" Abrasive belts, "Posi-Trak" electronic tracking & pneumatic tensioning, 15 - 45 FPM variable feed speed, automatic conveyor belt tracking. -- Double infeed & outfeed spring loaded holddown rolls, 0" - 8" max. manual part thickness opening with mechanical digital readout. -- The 143-3 HP75 has air operated disc brakes, motor load meters, 21" infeed conveyor extension, and infeed emergency stop.
Equipment Location:SOUTHWEST
Joe Retzlaff
800-374-5009 ext:348
TIMESAVERS 2311-24-6 SINGLE HEAD WIDE BELT SANDER1-Head, 43" cap., 0 - 5" opening (33" - 38" passline). -- Combination head with 4-3/4" contact roll & 2-1/2" finishing platen, 25 HP motor. 43" x 75" abrasive belt, disc brakes on main motor, centralized control panel. -- Features: Digital thickness readout, double infeed & outfeed holddown rollers, AC variable feed speed from 20 - 45 FPM, hour meter, main motor load meter. -- Includes: Dial indicators on drums/platen, auto. setup device, motorized lift, 14" infeed loading area, (4) bed jacks, through-beam abrasives belt tracking, infeed stop bar, and UL listed controls. 15" Minimum part length, quick release outboard support.
Equipment Location:EASTERN CDN, AL
EX-FACTORY INC.
704-841-2001
TIMESAVERS 2331-24-001 Wide Belt Sander (3) Heads: 43" Width cap. with Drum, Drum, Combination Head configuration:Head Configuration1st Head: Rubber covered contact roll, 8" dia., 25 HP motor.2nd Head: Rubber covered contact roll, 8" dia., 20 HP motor.3rd Head: Combination head with 5-1/2" dia. contact roll and 2-1/2" wide finishing platen, 15 HP motor. Specifications: --43" x 75" Abrasive belts --"Posi-Trak" electronic tracking & pneumatic tensioning --Contact roll & platen height adjustments with dial indicators --Conveyor belt feed, 20 - 45 FPM variable feed speed --Automatic conveyor belt tracking. --Double infeed & outfeed spring loaded holddown rolls --0" - 5" Max. motorized part thickness opening with LED readout.Equipped with & Features: --Automatic part thickness setup --Air operated disc brakes --Motor load meters --14" Infeed conveyor area, and infeed emergency stop.
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
TIMESAVERS 2321-45-01 Wide Belt Sander2-Head, 51" width cap. with (1) contact roll, and (1) combination head with contact roll and finishing platen. -- 1st Head: Rubber covered contact roll, 8" dia., 30 HP motor. -- 2nd Head: Combination head with a rubber covered contact roll 5-1/2" dia. and 2-1/2" wide segmented finishing platen, 25 HP motor, (2) dial indicators for contact roll height adjustment. -- 52" x 103" Abrasive belts, "Posi-Trak" electronic tracking & pneumatic tensioning, conveyor belt feed. -- 15 - 45 FPM Variable feed speed with inverter control, automatic conveyor belt tracking; double infeed & outfeed spring loaded holddown rolls. -- 0" - 5" Max. motorized part thickness opening with automatic part thickness set-up, air operated disc brakes, motor load meters, 14" infeed conveyor area, and infeed emergency stop bar.Note: This machine shows only 1,798 hours of running time
Equipment Location:EASTERN CDN
Joe Retzlaff
800-374-5009 ext:348
TIMESAVERS 2321-45-01 Wide Belt Sander2-Head, 51" width cap. with (1) contact roll, and (1) combination head with contact roll and finishing platen. -- 1st Head: Rubber covered contact roll, 8" dia., 30 HP motor. -- 2nd Head: Combination head with a rubber covered contact roll 5-1/2" dia. and 2-1/2" wide segmented finishing platen, 25 HP motor, (2) dial indicators for contact roll height adjustment. -- 52" x 103" Abrasive belts, "Posi-Trak" electronic tracking & pneumatic tensioning, conveyor belt feed. -- 15 - 45 FPM Variable feed speed with inverter control, automatic conveyor belt tracking; double infeed & outfeed spring loaded holddown rolls. -- 0" - 5" Max. motorized part thickness opening with automatic part thickness set-up, air operated disc brakes, motor load meters, 14" infeed conveyor area, and infeed emergency stop bar.
Equipment Location:NORTHEAST
Joe Retzlaff
800-374-5009 ext:348
TIMESAVERS 232-D Wide Belt Sander 2 Heads -- 2-Head, 36" cap. -- 1st Head: Rubber covered contact roll, 9-1/2" dia., 30 HP motor; -- 2nd Head: Finishing platen, 2-1/2" width, 20 HP motor, both heads with dial indicators for abrasive belt grit changes. -- 37" x 75" Abrasive belts with "POSI-TRAK" electronic tracking; -- Motorized part thickness adjustment with mechanical digital readout, 0" - 8" opening; "Auto-Set" automatic thickness setup system; -- Infeed & outfeed spring loaded holddown rolls, -- 15 - 45 FPM variable feed speed with2 HP motor. Complete with: -- Motor load meters, infeed emergency stop bar, disc brakes on sanding head motors, 24" infeed load area; 7" dia. dust outlets.
Equipment Location:EASTERN CDN
Joe Retzlaff
800-374-5009 ext:348
TIMESAVERS 237-2 Wide Belt Sander (2) Heads37" Width cap. Drum, Combination HeadHead Configuration: --1st Head: Rubber covered contact roll, 11-1/2" dia., 30 HP motor. --2nd Head: Finishing platen, 2-1/2" width, 20 HP motor.Specifications --37" x 75" abrasive belts with POSI-TRAK electronic tracking. --Manual part thickness adjustment with mechanical readout. --0" - 6" opening; --Infeed & outfeed spring loaded holddown shoes. --15 - 45 FPM variable feed speed.Equipped with & Features --Motor load meters. --Infeed emergency stop bar. --Disc brakes on sanding head motors. --24" infeed load area.
Equipment Location:SOUTHEAST
Joe Retzlaff
800-374-5009 ext:348
TIMESAVERS 237-3 HP Wide Belt Sander -- 3-Head, 36" cap. - (2) Contact rolls, and (1) Finishing platen. -- 1st Head: Rubber covered contact roll, 9-1/2" dia., 30 HP motor; -- 2nd Head: Rubber covered contact roll, 30 HP motor. -- 3rd Head: Finishing platen, 2-1/2" width, 20 HP motor; -- 37" x 75" abrasive belts with "POSI-TRAK" electronic tracking. -- Motorized part thickness adjustment with automatic part thickness set-up, mechanical digital thickness indicator, 0" - 8" opening, infeed & outfeed spring loaded holddown shoes, -- variable feed speed from 15 - 45 FPM, 3 HP motor. Complete with: -- Motor load meters, infeed emergency stop bar, disc brakes on sanding head motors, 30" infeed load area.
Equipment Location:EASTERN CDN
Joe Retzlaff
800-374-5009 ext:348
TIMESAVER 243-2IC Wide Belt Sander (2) Heads; ... 2-Head, 42" width cap., Drum, Drum.Head Configuration -- 1st Head: 11-1/2" Dia. rubber covered spiral grooved contact roll, 50 HP motor. -- 2nd HEAD: 11-1/2" Dia. rubber covered spiral grooved contact roll, 50 HP motor.Specifications: -- 43" x 75" Abrasive belts with air tensioning, "POSI-TRACK" solid state electronic abrasive belt sensing system, flip up abrasive belt loaders. -- Conveyor belt feed system with automatic belt tracking. -- Variable feed speed 15 - 45 FPM. -- Infeed and outfeed spring loaded holddown shoes. -- Motorized thickness adjustment with 0" - 6" opening.Equipped with & Features: -- 24" Infeed loading area with (3) infeed conveyor rolls. -- Air operated disc brakes on sanding heads. -- Over thick panel shutoff on infeed. -- Operator activated perimeter emergency stop. -- Motor load meters.
Equipment Location:MIDWEST, AL
EX-FACTORY INC.
704-841-2001
TIMESAVER 252-1 Wide Belt Sander, Single Head51" Width cap. Combination head. Head Configuration: 6" Dia. contact roll & dual action finishing platen, 30 HP V-belt drive motor.Specifications: -- 52" x 75" Abrasive belt, "Posi-Track" electronic belt tracking and air tensioning of abrasive belt. -- Ruff-Tex feed through conveyor belt. -- Variable feed speed from 15 - 45 FPM; (4) Precision anti-backlash 2-ton jacks for thickness control. Equipped with & Features: -- Double infeed & outfeed spring loaded pinch rollers, 12" infeed conveyor extension. -- Disc brakes for quick positive stopping of contact roll. -- Load meter; centralized control panel with all push button, and magnetic starters.
Equipment Location:NORTHWEST
Ed Webb
800-374-5009 ext:377
TIMESAVERS 252-1 IC Single-Head Wide Belt Sander: --51" width cap. Combination Head --Head Configuration --1st Head: Combination head with 9-1/2" Dia. rubber covered contact roll (55-60 duro) and a 4" wide electronically controlled segmented finishing platen for fine veneer sanding, 30HP-40 HP motor. --Specifications: -- Belt Size – 52″ x 75, Conveyor Belt Size – 52″ -- 14″ min. part length. Work Height Adjustment – 0 to 8″ -- 2HP AC variable feed speed conveyor drive --15 to 45 FPM Conveyor Speed (Variable) --Equipped with and Features --Electronic belt tracking --Limit switch abrasive belt monitoring --Motorized part thickness opening with digital readout --Combination in-feed and out-feed spring-loaded hold down rolls and shoes --Anti-kickback assembly --Vacuum conveyor --Perimeter emergency stop system -- Disc brakes, load meters on sanding head and controls mounted on belt loading side. --The sander has been Retro-fitted with the RED Ion Model CUBS Miniature 8 Digit Dual Counter & Rate Indicator
Equipment Location:MID ATLANTIC, AL
EX-FACTORY INC.
704-841-2001