Equipment For Sale

12K Hours 561 SP Head New Computer Pre Heater Leveling Rotate Runs Great

2019 Rottne F15D -7500 hours -Tight and dry -Serviced every 500 hours -Two sets of ECO tracks and front chains Ready to work!!!!! Low Hours!!!!!!

2019 Rottne F15D 8 Wheel Forwarder, One New Set of Eco-Tracks, One Set of Chains, Espar Heat, Enclosed Cab Heat, Air and Radio, Engine has 7,500 Hours, NO DEF, Good Center Section Tight, Ready For the Woods. Width: 114 in Length: 387 in Transportation height: 150.5 in Service weight: 41,225 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2023 HULTDINS SG360S (SN: 027-25226) BLADE 8-WHEEL, 15 TON FORWARDER CAB 710/45-26.5 TIRES

2016 Rottne F-15 Forwarder, Hours 18.300 Hours, One Set of Tracks, Enclosed Cab with Heat and Air Conditioning, Decent Tires, Ready for the Woods Weight: 41,225 lbs Width: 114 in Length: 387 in Height: 150.5 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2002 Rottne SMV Rapid 8W, 9,421 Hours. STK#32078 Please call with offers

Rottne Rapid, will take any reasonable offer

2011 Rottne F15 8WD Forwarder, Clean Machine Inside and Out, 60K in recent repairs, New Front and Rear Diffs, New Gears in Boggies, New Lift Cylinder on loader, New Drive Shaft, New Tire. Comes with set of tracks.

If you run an industrial business, you likely need numerous pieces of specialized equipment that can be difficult to find in a hurry. Row Electrical Equipment, Inc., stocks a vast inventory of industrial motors, motor starters, transformers, and other electrical equipment that is used in a wide variety of industries. We try to minimize down-time by having available a variety of equipment that is always important in a "need it now" situation.

MOTORS - MOTOR STARTERS - TRANSFORMERS - MISC ELECTRICAL EQUIPMENT - PHASE CONVERTERS

This item is in an Auction on exfactoryauctions.com. Go here to view item: http://exf.ac/i6s ROWLEY & HERMANCE Sash Sticking Machine Specifications: Table size 5” x 46”. Equipped with: 3 HP - 1,750 RPM Motor. (2) 2” Dia. x 2” W Serrated upper feed rollers.

RT 3rd Man Nailer with Stacker- 50x48. Fairly new, Lightly used machine, stored indoors. No guns. All air operated. Located in Minnesota. #C967

Rucker Hydraulic Unit

Technical specifications[Opening width](https://wtp.hoechsmann.com/en/lexikon/20472/opening_width)1.200 mm Veneer thickness min0,4 mm Veneer thickness max1,5 mm Strip width min45 mm Strip width max1.200 mm Feedrate max50 m/min Continuously variable feed Cooling device Gluing aggregate Edge gluing JointOnly edge gluing Material of the feeding chainStainless steel Declaration of CE-conformity Conformity marking[CE mark](https://wtp.hoechsmann.com/en/lexikon/50233/ce_mark) Total connection9 kW Weight1.500 kg

RUF RB440 Briquette Press (2) Systems available

RUF Briquette Press More info coming!

As pictured never installed (2) available

RUVO 2200 Stair Stringer Router, Top/Bottom, Semi-automatic. -- Size capacity (nominal): 2" Thick x 12" - 15-3/4" wide stringer size; semi-automatic operation. -- (2) 5 HP, 25,000 RPM Router motors for top & bottom heads. T & B heads are arranged to jump in & out to facilitate open plan stairs; automatic pneumatic clamping of stringers, spring loaded side pressure to keep stringers against the fence. -- Mirror-image routing on (1) pair of stringers at one time, graduated template automatically sets up to stated tread & rise, cuts standard wedge taper for both treads and risers. -- Includes: Clamp and feed system & safety covers. -- NOTE 1: Stair Router rebuilt in 2022 by BUILDERS AUTOMATION. Replaced 3HP with new 5HP routers. Reconditioned air cylinder pistons, air-over oil booster, replaced air lines, etc.. Painted from green to Blue.

RUVO 2260 Wedge Cutter. -- General Data: Wedge and glue-block cutter. Allows for 1" X and 2" X material in the same hopper. Cuts (2) wedges out of 1" X material and (1) wedge out of 2" X stock. -- Self diagnostic system, walk-away, hands free operation. -- If not reloaded, the machine has an auto-shut-off feature at the end of the stack to prevent the machine from cycling endlessly. --With capability to cut glue-blocks. -- Ports for dust collection.

RUVO 505, ...Prehung Door Machine.Handles a wide range of door, jamb, and hinge sizes. - Bevels doors and door hinges. - Designed for efficient handling and operation. - Fast, accurate hinge and lock backset adjustment. - Residential, Commercial, Architectural, and Labeled Fire Doors.Features: Heavy duty powered 3° beveler/sizer. Routers to ease door edges. Accurate target scales. The 4-hinge and jamb route location changes fast and precisely. A similar system for the backset on hinges & locks. Provision for single and double-belled doors. Controls interlocked by a PLC. Auto door sizing is fast to adjust the lifter bar by digital input and servo control. Reliable, long-lasting non-contact sensors. Fast push-pull controls with a friendly touchscreen HMI. Hinge screw gun and pre-drill included.Technical Details: Max Door Height: 6’ - 9’ or ADA Specs 6’ - 8’. -- Door Width: 1'-6"’ to 4’. -- Door Thickness: 1-3/8"; to 2-1/4. -- Jamb Size and Styles: Up to 1-1/4"; x 10";, all styles. -- Number of hinges: Up to (4); Hinge Size: 3-1/2" to 5";; Hinge Radius 1/4" to 5/8". -- Hinge Backset: Scaled as required -- Lock Bore Sizes: 2-1/8"; Standard. -- Lock bore Backset: Scaled to 5";. -- Lock Bore Latch plate: Up to 1-1/4"; x 8";.Machine Size: 18’ x 3’ x 7’; Approx. Machine Weight: 3,200 Lbs; Electrical: 4-Wire, 230/3/60 and draws 25 Amps. Requires a 1/2" airline using 40 CFM @ 90 PSI.Options Include: -- Built-In Power Beveler Vacuum System......$ Please call. -- Screw Driver............................................... Included. -- Pre-Drill Kit.................................................. Included -- Digital Readout ..........................................$ Please call.RUVO 512, ...Heavy Duty Strike Jamb Mortising Machine.For Jam Sizes up to 1-1/4"; x 9"; x 10";. Strike Plate mortise to 6";. Compliments Jamb Preparation of the RUVO 505 and 405. Operated by one worker.Unit Includes: -- Adjustable Jamb Stops. -- Heavy Duty Construction. -- Foot Pedal Actuated Clamp. -- 120 Volt, 1-Phase, 20 Amps. -- 1/2" Airline needs 0.5 CFM @ 100 PSI. -- 1.5 HP Router.@ 23,000 RPM. Additional Cost for the RUVO 512 above ...$Please call.Material Handling for the Line:Loading Device..........................................$ Please call.Unloading Device.......................................$ Please call.